• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.471-479
• /
• 2006

Automatic transfer equipments of manufacturing and process line trend toward big size as LCD glass is big size, heavy weight. The conventional stocker uses rotational motor and mechanical power converter device as travel axis of stocker crane and then frequent maintenances by complex structure and mechanical friction are required. Also it has problem to minimize the particle generation. To solve these problems, this paper verified the performance of permanent magnet(PM) excited transverse flux linear motor(TFLM) that is big power density per unit volume applied for travel axis of 7 generation stocker that is being big size, high power, long distance by the experiment based on proposed control algorithm, controller and power converter device.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.842-845
• /
• 2007

The field of automatic identification using RF is the one of the emerging ubiquitous computing areas. Early RFID techniques was focused on hardware areas, but RFID middleware has recently gained a lot of attention, which collects and filters tag data, and provides it to enterprise applications. The RFID middleware proposed by EPCglobal only can process EPC tag data, and cannot handle the KKR code which is defined by korean organization. So in this paper, we propose a method which can process the KKR code in RFID middleware systems. Using our approach, the RFID middleware can be extended as general ubiquitous middleware systems which process not only EPC code but also KKR code.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.108-114
• /
• 2007

This research represents the catalytic converter for application in the motorcycle. We have to consider about catalytic converter for reducing exhaust gas strength regarding the displacement volume enlargement. The catalytic converter has been widely used to satisfy the regulations of pollutant emissions from automobiles. Recently, all catalytic converter researches are about automobile. Study about motorcycle catalytic converter has not been conducted yet. In this study, flow uniformity and pressure distribution were simulated in the monolithic inlet of catalytic converter for motorcycle. Exhaust pulsation pressure was set as transient condition about. It was found that flow uniformity shown in base model (0.85) was lower than megaphone model (0.98).

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.350-356
• /
• 2005

We have developed a dual-channel type automatic measurement system to evaluate AC-DC current transfer difference of the thermal current converter(TCC) which is primary standard of AC current. The output drift effect of the TCC is minimized by measuring simultaneously the output voltages of two TCCs using voltmeter. Furthermore, the offset voltage of the voltmeter is cancelled nearly out by taking the average values of two outputs of TCCs measured with the forward-reverse directions using dual channel scanner. The uncertainties of the automatic system were 7 to $86{\mu}A/A$ for 3 mA to 10 A at 40 Hz to 20 kHz, which were evaluated by the comparisons between adjacent range of TCCs and inter-comparison with national measurement institute of Germany(PTB). The capability for ac-dc transfer difference measurement was improved by one order compared with that for the manual ac-dc measurement system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.381-382
• /
• 2009

본 논문은 고령자 및 장애인의 안전한 이동을 지원하기 위한 지능형 휠체어에서의 자동 장애물 감지 및 회피 기술을 개발한다. 이때 다양한 환경에서의 장애물을 정확히 감지하고 회피하기 위하여 학습을 이용한 비전 기반의 경로 선정 방법이 제안 된다. 제안된 시스템은 배경 분류기, occupancy grid map 생성기, 경로 선정기로 구성되며, 경로 선정 시 강건한 장애물 검출을 수행하기 위해 입력 영상을 occupancy grid map으로 변환하고, K-means clustering 알고리즘을 이용하여 생성된 대표 템플릿들과 비교하여 이동 가능한 방향을 선정한다. 제안된 시스템의 효율성을 증명하기 위해 다양한 형태의 장애물을 포함하는 실내 및 실외에서 실험한 결과 81.7%의 정확도를 보였으며, 지능형 휠체어 사용자에게 안전한 이동성을 제공 할 수 있음을 증명 하였다.

• Korean Journal of Crystallography
• /
• v.8 no.1
• /
• pp.38-47
• /
• 1997

A new weighing sensor for the automatic diameter control system of the crystal growth is developed in this study. This weighing sensor measures the frequency of the vibrating element which is lineally changing with respect to weight. The signal and the power of this system are transmitted without any physical contact, so that this sensor offers high accuracy and resolution. This system consists of a string, a sinusoidal wave generator, an automatic amplification adjusting circuit, signal transformers and a PCB. 4 kinds of programs are developed for checking DAC, weight calibration and controlling growth process. The measurements of the standard deviation and the resolution show $\pm0.10g$(measured at every second) and $5{\times}10^{-5}$, respectively, This weighing sensor is effective under high pres-sure of 200 atm, high temperature and vacuum condition. The weighing system can control the temperature in the accuracy of $\pm0.025^{\circ}C$ with the 'signal divider'. The optical quality single crystals of $(YGd)_3Sc_2Ga_3O_{12},\;Er-Y_3Sc_2Al_3O_{12},\;and\;Bi_{12}GeO_{20}$ have been grown by Czo-chralski method using this auto-diameter control system.

• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.64-68
• /
• 2007

This paper describes the development of RF front.end equipment of a wide band high precision satellite navigation receiver to be able to receive the currently available GPS navigation signal and the GALILEO navigation signal to be developed in Europe in the near future. The wide band satellite navigation receiver with high precision performance is composed of L - band antenna, RF/IF converters for multi - band navigation signals, and high performance baseband processor. The L - band satellite navigation antenna is able to be received the signals in the range from 1.1 GHz to 1.6 GHz and from the navigation satellite positioned near the horizon. The navigation signal of GALILEO navigation satellite consists of L1, E5, and E6 band with signal bandwidth more than 20 MHz which is wider than GPS signal. Due to the wide band navigation signal, the IF frequency and signal processing speed should be increased. The RF/IF converter has been designed with the single stage downconversion structure, and the IF frequency of 140 MHz has been derived from considering the maximum signal bandwidth and the sampling frequency of 112 MHz to be used in ADC circuit. The final output of RF/IF converter is a digital IF signal which is generated from signal processing of the AD converter from the IF signal. The developed RF front - end has the C/N0 performance over 40dB - Hz for the - 130dBm input signal power and includes the automatic gain control circuits to provide the dynamic range over 40dB.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.733-745
• /
• 1995

This study is aimed at construction of a translator for a functional programming language. For this goal we define a functional programming language which has lazy semantics and develop a translator for it. The execution model selected is the G-machine-based combinator graph reduction. The translator is composed of 4 phases and translates a source program to a C program. The first phase of the translator translates a source program to a enriched lambda- calculus graph, the second phase transforms a lambda-calculus graph into supercombinators, the third phase translates supercombiantors to a G program and the last phase translates the G program to a C program. The final result of the translator, a C program, is compiled to an executable program by C compiler. The translator is implemented in C using compiler development tools such as TACC and Lex, under the UNIX environments. In this paper we present the design and implementation techniques for developing the translator and show results by executing some test problems.

• Journal of the Korea Convergence Society
• /
• v.8 no.12
• /
• pp.85-92
• /
• 2017

As accessibility toward traditional cultural contents drops compared to its increase in production, the need for higher accessibility for continued management and research to exist. For this, this paper introduces an image classifier model for traditional images based on artificial neural networks, which converts the input image's features into a vector space and by utilizing a RNN based model it recognizes and compares the details of the input which enables the classification of traditional images. This enables the classifiers to classify similarly looking traditional images more precisely by focusing on the details. For the training of this model, a wide range of images were arranged and collected based on the format of the Korean information culture field, which contributes to other researches related to the fields of using traditional cultural images. Also, this research contributes to the further activation of demand, supply, and researches related to traditional culture.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.461-463
• /
• 1996

A FB-ZVS(Full Bridge Zero Voltage Switching) PWM DC/DC converter for electric vehicles is analyzed in this paper. The converter considered is a step-down DC/DC converter with the ratings of 3l2/I3.5V and 1.35kW. The steady state analysis of this converter is divided into six operating modes. Digital simulations using PSPICE are carried out to verify the steady-state analysis.