• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.205-215
• /
• 1996

In this paper, the performance analysis of the vehicle with the Ravigneaux type automatic transmission has been carried out using information of engine and drivetrain. It is necessary to understand the overall system including engine, torque converter, clutch, planetary gears, and road load. The equations of motion are derived from dynamic model. The GUI computer simulation program has been developed to analyze the powertrain performance of the vehicle with the Ravigneaux type automatic transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1601-1606
• /
• 2005

In this study, an automatic idle stop control system was developed, which automatically stops the idle state engine as it detects the stop state of the car for several seconds and restarts the stopped engine with the driver's electrical signal. It is composed of microprocessor and the related electronic circuits and communicates with ECU and TCU. With accurate and confirmed operating performance, the control system was equipped in the test car which was proceeded the ECE15+EUDC mode test. It is confirmed that the control system, ASG has much favourable effects on reducing the fuel consumption and harmful exhaust emissions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.117-124
• /
• 2019

Military Vehicles of the Korean army had been developed before 2004 and used manual transmissions. Manual transmissions contain a clutch system regulating the force from engine to transmission. In this study, a 2.5-ton military vehicle's clutch system was investigated. The existing clutch system had the characteristics that need to adjust the clearance between the clutch cover and release bearing. Improper clearance led to early wear of the clutch disk and failure of the clutch cover. To solve these problems, an improved clutch system was suggested and tested. The improved clutch system contains auto adjustment of the clearance and an enhanced clutch disk. To verify the improved clutch systems, 2 stage tests were conducted: an accelerated life test of the clutch system, and a driving test by trainee of driving more than 3,000km. As a result, the problems caused by the improper clearance adjustment were solved and this design was verified.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.3
• /
• pp.13-21
• /
• 2007

A forklift is a motive machine powered by LPG, diesel engine or electric motors. The internal combustion engine type forklift is equipped with automatic transmission to meet the required drive load as well as the easy operation of the vehicle. This paper deals with the shift control and endurance test controller which is developed for the functional test of the newly designed automatic transmission on a dynamometer test bench. Its major function is to control the proportional solenoid currents, which is directly related to clutch pressures, for the given reference current trajectory during shift and sequential operation of shift schedule designed for the durability test at each gear. It also has the ability to monitor all the necessary test data through RS232 communication and log them to disk files. The current controller of embedded system is designed from the identified dynamics of solenoid coil and the current reference can be easily modified with a user interface software on PC so as to match the shift data by experiments.

• Journal of Biosystems Engineering
• /
• v.18 no.4
• /
• pp.305-316
• /
• 1993

Fuel efficiency in tractor operations dep6nds on the selection of transmission gears and upon the engine being operated at or near maximum torque much of time. The objective of this study was to develop automatic control systems for tractor transmission ratio and governor setting so that the engine is operated at or near maximum torque as much of time as possible. An indoor test unit, which can be used to simulate tractor operation, was built in order to investigate the system design parameters and test the performance of the control system designed. The test-unit consists of engine, gear-type transmission, dynamometer, and control systems for transmission ratio and engine speed. Governor setting lever was controlled by a step motor, and the clutch and transmission levers were controlled by hydraulic cylinders and solenoid valves. The control systems showed good time responses which are assumed to be suitable for optimal tractor operation. The time required for shifting gears from clutch disengagement to engagement was about 1 second, which is almost the same as that for manual shift. And the settling time for engine speed control system was about 5 to 6 seconds.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.2
• /
• pp.81-87
• /
• 1996

Time delay control(TDC) law has been recently suggested as an effective control technique for nonlinear time-varying systems with uncertain dynamics and/or unpredictable disturbances. This paper focuses on the applications of the TDC algorithm to torque control of an engine system and speed control of an engine/automatic transmission system. Through the stability analysis of the engien system based on TDC, determination of the appropriate time delay and control factor is investigated. It was revealed that the size of time delay of the TDC law should be greater than that of transport delay of the system for both stability and better control performance. Simulation and experimental results for the engine torque control and engine/automatic transmission speed control systems show both relatively good command following and disturbance rejection properties. However, TDC controller shows rather slow responses when applied to the system with large transport delay.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.133-136
• /
• 2001

This paper partially presents a Hierachical neural network architecture for providing the intelligent control of complex Automatic Transmission(AJT) system which is usually nonlinear and hard to model mathematically. It consists of the module to apply or release an engine brake at the slope and that to judge the intention of the driver. The HNN architecture simplifies the structure of the overall system and is efficient for the learning time. This paper describes how the sub-neural networks of each module have been constructed and will compare the result of the intelligent hJT control to that of the conventional shift pattern.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.534-542
• /
• 1998

In this paper a simulation model for the powertrain control of gasoline engines with automatic transmission is presented. A modular programming approach has been pursued and the MATLAB/SIMULINK has been utilized as the programming environment. The engine/transmission system is analyzed in the object-oriented fashion whereby easy transferal of the modules, which represent physical parts or analysis subsystems, is guaranteed. Some mathematical models are adopted from the literature to compare the simulation results with the model and the experimental results in the literature. It is expected that the whole program or individual module constructed in this paper are useful for the automotive engineers in designing a new engine/transmission system and/or in modifying parts of existing systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.963-969
• /
• 2015

Bicycle is one of the most popular mode of transport due to the increase of interest in the well-being and environment pollution. Before fabricating a continuously variable transmission that is applied to the actual bicycle, for reducing the problems in the early stage, the reliable simulation program has been applied and the financial problem can be solved. In this paper, in order to confirm the design factor, the stress analysis has been applied. In all models, each link and the joint portion are assumed to be a major design factors, and impact of each link and joints received stress during the operation and it is confirmed by using the CAE. Also, for the analysis region, the special code has been developed to calculate pulsation phenomenon through appropriate mathematical modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.2
• /
• pp.21-26
• /
• 2000

Flow forming is a chipless metal forming method for axi-symmetric parts, which is more economical. efficient and versatile method of producing parts than the other sheet metal forming process such as stamping or deep drawing. In this study, flow forming process with 1-Roller is applied to produce auto-transmission parts of automobiles which have been produced by Press drawing process so far. It can be known that flow forming process is applicable to the flexible manufacturing system due to the low cost for the establishment and it can be combined with press forming process to promote productivity and to improve the accuracy of products.