• Title/Summary/Keyword: 자동배열장치

Search Result 13, Processing Time 0.019 seconds

Development of PV Module Process Using Automatic Arrangement Tool (자동배열장치를 이용한 태양전지모듈 제조 공정 개발)

  • Kang, Gi-Hwan;Yu, Gwon-Jong;Ahn, Hyung-Keun;Han, Deuk-Young
    • Journal of the Korean Solar Energy Society
    • /
    • v.23 no.4
    • /
    • pp.1-9
    • /
    • 2003
  • In this study, a manufacturing process for PV module has been developed using an automatic arraying equipment. It is expected that this process could improve the productivity and curtail the production cost in the photovoltaic module production line. From the results, it is proved that this process reduces Line-stop and enhances the productivity more than 15% a day which can be related directly to the production line cost.

Development of Temperature Control System to use in Building Heating of low Temperature Heat of PEMFC (고분자전해질 연료전지의 중저온 열원을 건물난방에 이용하기 위한 온도 제어장치 개발)

  • Cha, Kwang-Seok;Kim, Hway-Suh
    • Plant Journal
    • /
    • v.10 no.3
    • /
    • pp.45-51
    • /
    • 2014
  • This study performs several experiments on a newly developed temperature safety system that can be used for residential building heating systems, the heat source of which is derived from a conventional fuel cell. Prior to this, the hot water made from a fuel cell was not used in residential housing but just went to waste. The present safety system is installed in the current underfloor heating system. At first we used the CFD technique to develop a new heat exchanger. The fuel cell must satisfy the thermal conditions of the inlet temperature being $55^{\circ}C$ and the outlet temperature being $60^{\circ}C$. But variations in weather cause fluctuations in the heating water temperature. The experimental results show our new system capable of maintaining the temperature difference within a ${\pm}0.5^{\circ}C$ range. So we believe that our new PFMFC fuel cell stack array is a good candidate for being used in residential heating systems.

  • PDF

Automatic generation of Hangul Johap typeface using small character set (제한된 글자 디자인에 의한 한글 조합형 글꼴의 자동생성)

  • Kang, Sang-Soo;Cho, Hwan-Gue
    • Annual Conference on Human and Language Technology
    • /
    • 1994.11a
    • /
    • pp.217-222
    • /
    • 1994
  • 한글 글꼴을 새롭게 만들려면 지금까지는 기본 글자인 자소를 디자인하든지 아니면 완성된 글자 전체를 디자인해야 했다. 조합형의 글자디자인의 경우, 전체 글자가 아니라 부분적인 한글 전자사전은 많은 양의 데이타를 저장할 수 있어야 하며, 빠른 검색 속도를 제공해야 한다. 기존의 트라이는 공통접두사만을 압축하기 때문에 사전의 크기가 방대하다는 단점이 있다. 본 논문에서는 DAWG(Directed Acyclic Word Graph)를 이용하여 공통접미사까지 압축하였고, 검색과 기억장소의 효율을 위하여, 링크드리스트 구조의 DAWG를 유형별 배열 구조로 바꾸었다. 전국의 각 학교 이름들을 대상으로 실험한 결과, 본 논문에서 제안한 DAWG를 이용한 배열 구조의 사전은 트라이와 비교하여 볼 때, 검색 연산의 성능은 동일하게 유지하면서 기억 장소의 효율과 압축율에서 효과적이었다. 또한, 트라이보다 주기억장치와 보조기억장치와의 블록 입출력횟수를 줄임으로써 전체 검색 시간을 낮출 수 있었다.소를 디자인하기 때문에 전체 글자의 모양이 좋지 않다는 단점이 있었고 완성형의 경우 완성된 글자 전체를 모두 디자인해야하는 단점이 있었다. 본 논문에서는 한글 글꼴 개발의 한 방법으로 제한된 글자의 디자인에 의한 전체 글꼴 생성에 관한 한 방법을 제시한다. 이 방법은 표준으로 설정된 몇 글자를 디자인하면 그 글자를 분석하여 자소들을 위한 글꼴 화일이 만들어지고 자소 글꼴 화일로부터 다른 모든 글자를 만들어 낸다.

  • PDF

N-terminal amino acid sequence analysis of major manganese peroxidase (MnP3) produced by static culture of Pleurotus ostreatus (느타리 버섯균의 정치배양으로부터 생산되는 중요한 망간퍼옥시데이즈(MnP3)의 N-말단 아미노산 배열 분석)

  • Ha, Hyo-Cheol
    • Journal of Mushroom
    • /
    • v.17 no.4
    • /
    • pp.185-190
    • /
    • 2019
  • Pleurotus ostreatus No.42, known as the ligninolytic basidiomycetes, showed production of MnP and Lac, but did not show any LiP acitivity in static culture, grown in GPYW liquid medium. Maximum production of MnP (80U/flask) was observed on day 11 of culturing in this medium. Chromatographic purification of MnP included the use of Sepharose CL-6B and Mono-Q. The major MnP isozyme purified by column chromatography was observed to be a 36.4 KDa (single band on SDS PAGE). The 19-amino acid sequence from the N-terminal was determined by protein sequencing to be ATCADGRTTANAACCVLFP. The N-terminal sequence of the major MnP isozyme of P. ostreatus No.42 was found to be the same as a previously reported sequence of an MnP3 isozyme from this fungus.

Unmanned Driving of Robotic Vehicle Using Magnetic Maker (자계표식을 이용한 로봇형 차량의 무인주행)

  • Im, Dae-Yeong;Ryoo, Young-Jae
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.18 no.6
    • /
    • pp.775-780
    • /
    • 2008
  • In this paper, unmanned driving of robotic vehicle using magnetic marker is proposed. One of the most important component of autonomous vehicle is to detect the position of a magnetic marker on the road. In order to calculate the precise position of a magnet embedded on the road, the relation of magnetic field and a sensor is analyzed, and a new position sensing system using arrayed magnetic sensor is proposed. Also, the steering control system using a stepping motor is developed for driving by automatic mode as well as manual mode. For the verification of usability, the developed robotic vehicle is tested on magnetic road.

Unmanned Driving of Vehicle Using Guidance System Based on Magnetic Marker (자계표식기반 안내시스템을 이용한 차량의 무인주행)

  • Im, Dae-Yeong;Ryoo, Young-Jae;Choi, Min-Hyok
    • Proceedings of the Korean Institute of Intelligent Systems Conference
    • /
    • 2008.04a
    • /
    • pp.67-70
    • /
    • 2008
  • 본 논문에서는 자계표식기반 안내시스템을 이용한 차량의 무인주행을 제안한다. 자계기반 안내시스템에서 가장 중요한 것은 자계도로상의 자석의 위치예측이다. 자석의 위치를 예측하기 위하여 자석과 센서의 상관관계를 해석하여 도로에 매설된 자석의 위치를 검출하기 위한 배열형 자계표식위치인식센서를 개발하였다. 또한 자동모드와 수동모드의 동작을 위해 스텝모터를 이용한 조향제어장치를 개발하였다. 자율주행 실험을 위해 자계기반 자계도로를 구성하였다. 그리고 로봇형 차량을 자계도로에서 실험을 통해 실용성을 입증하였다.

  • PDF

Study on the Swine Farming Facilities by Survey for the Development of the Optimum Production System Models (최적화 생산시스템 모델 개발을 위한 양돈시설의 조사 연구)

  • 장동일;이봉덕;조한근;장홍희
    • Journal of Animal Environmental Science
    • /
    • v.2 no.1
    • /
    • pp.1-11
    • /
    • 1996
  • This study was conducted to analyze the present status and the levels of mechanization and automation for raising, feeding, water supply, propagation, health management, ventilation and heat control, data analysis, and etc, and to establish the guide of the future study on development of the optimum production system models of swine facility from the results of this analysis. The scheme of the future study on the development of the optimum production system model of swine facility was established as follows : 1. A Korean and environmental control type slatted windowless swine housing model would be developed according to the following basis : \circled1 Boars, gilts and sows, delivery sows should be raised individually and piglets, growing pigs, and finishing pigs should be raised in group. \circled2 The arrangement of furrowing house were two rows of furrowing crates facing the center aisle. 2. The environmental control system and waste management system that are suitable to Korean and environmental control type slatted windowless swine housing model would be developed. 3. An electronic identification device would be developed. 4. The automatic individual wet feeding system by electronic identification device and computers would be developed. 5. The individual management system would be developed, which could manage individually the breeding pigs by the electronic identification device. 6. An expert system would be developed, which could manage the health and data base of pigs.

  • PDF

Design and Implementation of Multifunction 2-Channel Receiver for 3 Dimensional Phased Array Radar (3차원 위상배열 레이다용 다기능 2채널 수신기 설계 및 제작)

  • 강승민;양진모;송재원
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.35D no.9
    • /
    • pp.1-12
    • /
    • 1998
  • We have implemented receiver for a 3 Dimensional Phased-Array Radar detecting the azimuth angle, the altitude, the range of a target on real time. This system consists of high frequency module, which protects receiver and controls sensitivity, intermediate frequency module, monopulse detector, IQ phase detector, AGC controller. A two-channel receiver with same function is implemented for increasing accuracy of target altitude data by amplitude comparison monopulse method. The TSS sensitivity of the receiver is -98dBm. The bandwidth of the receiver is 500 MHz. We can control the system gain manually by 100 dB when be AGC off. The gain and phase unbalance of two channels is 5 dB and 30 degree, respectively. The image rejection rate of the IQ detector is 30 dB. We used duroid substrate and package- type device.

  • PDF

The Crystal Structure of Bis(ethylenediamine)palladium(II)-Bis(oxalato)palladate(II) (Bis(ethylenediamine)palladium(II)-Bis(oxalato)palladate(II)의 결정구조)

  • Go, Gi-Yeong;Nam, Gung-Hae;Han, Sang-Gon
    • Korean Journal of Crystallography
    • /
    • v.9 no.1
    • /
    • pp.71-76
    • /
    • 1998
  • Crystal structure of Bis(ethylenediamine)palladium(II)-Bis(oxalato)palladate(II0 has been determined by X-ray crystallography. Crystal data : (Pd(C2H8N2)2.Pd(C2O4)2), Fw=509.04, Monocline, Space Group P21/c (no=14), a=6.959(2), b=13.506(2), c=15.339(2) Å, β=99.94(3), Z=4, V=1420 Å3, Dc=2.380 gcm-3, μ=25.46cm-1, F(000)=992. The intensity data were collected with Mo-Kα radiation (λ=0.7107 Å) on an automatic four-circle diffractometer with a graphite monochromater. The structure was solved by Patterson method and refined by full matrix least-square methods using unit weights. The final R and S values were R=0.021, Rw=0.030, Rall=0.032 abd S=2.1 for 1472 observed reflections. The essentially planar complex anions form diade of interplanar distances of 3.41 Å and their diads are stacked along aaxis with interplanar separation of 3.44 Å.

  • PDF

Design and Implementation of Psychological Diagnosis Expert System based on the SandTray (모래 상자 놀이 기반 심리 진단 전문가 시스템 설계 및 구현)

  • Son, Se-Jin;Lee, Kang-Hee
    • Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
    • /
    • v.7 no.11
    • /
    • pp.235-244
    • /
    • 2017
  • This paper aims to design a system for psychological diagnosis in sandbox play by applying rule based expert system. Sandbox play is one of play therapy and it is a technique that can be combined with psychological diagnosis and treatment using sand and various kinds of figures. In this technique, we focus on psychological diagnostic factors and try to implement a system that automatically diagnoses psychological types when input values are given. Therefore, six kinds of language objects are set and the rules are created according to the types of figures, arrangement of figures, and production time in the sand box used as a reference element in the diagnosis method. In this system, it is assumed that the client recognizes the finished sandbox as a sensor device. Then, when the recognized state enters the input value, the rules based on the language object are ignited in order. Through this, the client is diagnosed with one of 26 types of psychology. As a result, the diagnostic process is simplified and automated. Accordingly, a more detailed psychological diagnosis and treatments are provided.