• Title/Summary/Keyword: 자동계획

Search Result 529, Processing Time 0.028 seconds

Estimation of Genetic Parameters for Economic Traits and Body Conformations in Korean Native Ogol Fowl (한국재래오골계(韓國在來烏骨鷄)의 경제형질(經濟形質)과 체형(體刑)에 대한 유전모수(遺傳母數)의 추정(推定))

  • Han, Sung Wook;Sang, Byoung Chan;Kim, Hong Ki
    • Korean Journal of Agricultural Science
    • /
    • v.17 no.1
    • /
    • pp.26-33
    • /
    • 1990
  • This study was conducted to estimate heritabilities and genetic correlations of economic traits and body conformations in Korean Native Ogol fowl. The data analyzed were the record of 450 pullets bred from 150 dams and 20 sires of the fowl obtained from June 18, 1987 to February 6, 1989. The results of this study were summarized as follows ; The estimates of heritability for body weight, egg weight and shank length from combined variance components were relatively high, ranging from 0.415 to 0.558, while those for age at first egg, egg production and breast width were moderate, ranging from 0.301 to 0.334. For genetic correlations, body weights were negatively correlated with egg production, ranging from -0.552 to -0.309, while positive correlations were found between body weight and egg weight, ranging from 0.285 to 0.380. Also, egg production was negatively correlated with egg weight, ranging from -0.383 to -0.381. The shank length showed very high positive correlations with the body weights and age at 1st egg, ranging from 0.328 to 0.843. Hence the improvement in shank length will increase the body weight as well as the age at 1st egg.

  • PDF

Development of Film Verification as the QA of IMRT for Advanced Hepatoma Patients (간암 환자의 세기조절 방사선치료에서 임상적응 가능한 QA 기법의 개발)

  • Kim Myung-Se
    • Progress in Medical Physics
    • /
    • v.17 no.1
    • /
    • pp.40-46
    • /
    • 2006
  • Hepatoma is one of 3 most common malignancies in Korea, the survival rate is not improved since last decades because of delayed diagnosis and limited treatment conditions. Radiation was one of treatment options but the impact on the survival is not remarkable. High dose exposure to target area was suggested for improved effect but low tolerance dose of normal liver tissue is the main limited factor. IMRT is the advanced form of 3DCRT, for focusing high dose on target with minimal dose to surrounding normal tissues. Motion of the tumor by respiration, cardiac pulsation and peristalsis is the main treatment harrier of IMRT for treatment of hepatoma patients. Development of QA technique for acceptable geometrical uncertainties and dose error on target volume is essential for IMRT in clinical treatment but proper QA technique is not yet developed. This study compared the verification film dosimetry with measured dose in phantom and calculated dose in planning computer on exactly same conditions of patient treatments. Within 3% dose differences between 3 groups were confirmed. We suggest that our verification QA technique is easy, economic, iterative and acceptable in clinical application for advanced hepatoma patients.

  • PDF

Technical Trends of Hydrogen Manufacture, Storage and Transportation System for Fuel Cell Vehicle (연료전지자동차용 수소제조와 저장·운반기술동향)

  • Kil, Sang-Cheol;Hwang, Young-Gil
    • Resources Recycling
    • /
    • v.25 no.1
    • /
    • pp.48-59
    • /
    • 2016
  • The earth has been warming due to $CO_2$ gas emissions from fossil fuel cars and a ship. So the hydrogen fuel cell vehicle(FCV) using hydrogen as a fossil fuel alternative energy is in the spotlight. Hyundai Motor Company of Korea and a car companies of the US, Japan, Germany is developing a FCV a competitive. Obtained hydrogen as a by-product of the coke plant, oil refineries, chemical plants of steel mill, coal is reacted with steam at high temperatures, methane gas, manufacture of high purity hydrogen Methane Steam Reforming and hydrogen detachable reforming method using the Pressure Swing Adsorption or Membrane Reforming technical or decomposition of water to produce electricity. Hydrogen is the electronic industry, metal and chemical industries, which are used as rocket fuel, etc. are used in factories, hospitals, home of the fuel Ene.Farm system or FCV. And a method of storing hydrogen is to store liquid hydrogen and a method for compressing normal hydrogen to the hydrogen container, by storing the latest hydride or Organic chemical hydride method is used to carry the hydrogen station. Korea is currently 13 hydrogen stations in place and in operation, plans to install a further 43 places.

Present Status of Hydrogen Refueling Station in KIER (KIER 수소충전소 구축 현황)

  • Seo, Dong-Joo;Seo, Yu-Taek;Seo, Yong-Seog;Park, Sang-Ho;Roh, Hyun-Seog;Jeong, Jin-Hyeok;Yoon, Wang-Lai
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2006.06a
    • /
    • pp.21-24
    • /
    • 2006
  • 수소의 소규모 분산 생산 기술은 본격 적 인 수소 인프라가 도입되기 전에 연료전지 자동차의 수소 충전용이나 분산 발전형 연료전지의 수소 공급을 위해 필요하다. 생산 용량은 수소 기준으로 $20{\sim}100 Nm^3/hr$ 정도로 현재로선 천연가스의 수증기 개 질법이 가장 경제적인 공정으로 알려져 있다. 소규모 생산에 따른 열효율 저하를 줄이 기 위해 단위 공정들이 통합된 컴팩트 개질 시스템의 개발이 필요하다. 연료전지 자동차용 수소 인프라 조기 구축을 위하여 수소충전소 구축과 국산화 천연가스 수증기 개질기 개발을 병행하여 진행하였다. 수소 충전소 구축 부분은 충전소 부지 확보, 건물 건축, 각종 유틸리 티 설치의 토목 부분과 천연가스 개질형 수소 제조 유닛 설치, 수소 압축, 저장, 디스펜싱 시스템 설치를 포함하고 있으며 고압 설비에 대한 인허가 대응 및 안전대책 작업도 진행하였다. 구축된 수소충전소는 향후 연료전지 자동차 연계 실증 프로그램에 활용할 수 있다. 국산화 핵심 기술 개발을 위하여 열 및 시스템 통합 설계에 의 해 천연가스 수증기 개질기를 제작하고 내부 열교환 구조에 따른 개질기의 성능을 평가하였다. 개발된 개질기는 개질온도 $720^{\circ}C$, 수증기 대 카본 비 2.7의 운전조건에서 $23Nm^3/h$ 이상의 수소 생산이 가능하였으며 73% 이상의 개질 효율을 나타내었다. 개발된 천연가스 수증기 개질기는 향후 수소 정제용 PSA(Pressure Swing Adsorption) 시스템과 연계하여 수소충전소 국산화 엔지니어링 설계 패키지 개발의 핵심 기 술로 사용할 계획이다.시간 정도 운전한 후 시스템을 정지하였다 메탄 전환율과 일산화 탄소 농도, 열효율을 모니터링 하고 있으며, 현재까지 초기 성능을 그대로 유지하고 있다. 앞으로 일일시동-정지 운전 시험을 지속하면서 초기 시동 특성 및 부하 변동에 따른 응답 특성 개선, 그리고 연료전지와의 연계 운전을 실시할 예정이다 한다. 단위 전지 운전 온도 $130^{\circ}C$, 상대습도 37%의 운전 조건에서도 상당히 우수한 전지 성능을 보임에 따라 고온/저가습 조건에서 상용 Nafion 112 막보다 우수한 막 특성을 나타냄을 확인하였다.소/배후방사능비는 각각 $2.18{\pm}0.03,\;2.56{\pm}0.11,\;3.08{\pm}0.18,\;3.77{\pm}0.17,\;4.70{\pm}0.45$ 그리고 $5.59{\pm}0.40$이었고, $^{67}Ga$-citrate의 경우 2시간, 24시간, 48시간에 $3.06{\pm}0.84,\;4.12{\pm}0.54\;4.55{\pm}0.74 $이었다. 결론 : Transferrin에 $^{99m}Tc$을 이용한 방사성표지가 성공적으로 이루어졌고, $^{99m}Tc$-transferrin의 표지효율은 8시간까지 95% 이상의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{

  • PDF

Development of Web-GIS based Topsoil Erosion Prediction System (웹GIS 기반 표토침식 예측 시스템 개발)

  • Kum, Donghyuk;Lee, Dongjun;Sung, Yoonsu;Lim, Kyoung Jae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.323-323
    • /
    • 2016
  • 최근 강우강도 등의 기후변화로 인한 표토침식량이 증가하고 있고, 이에 따른 사회적 환경적 문제가 부각되고 있다. 특히 표토는 인류에게 식량생산의 기반이 되고, 정주공간을 제공할 뿐만 아니라 에너지 생산, 수자원 함양, 기후변화 대응, 생물 다양성 유지, 생태계의 건전성, 자원함양 및 순환, 오염물질 정화 등 소중한 생명자원이다. 이에 환경부에서는 2012월 12월 표토의 침식현황에 관한 고시를 제정하고, 표토 유실 대책 방안을 수립하기 위한 노력을 기울이고 있다. 이에 자원으로서의 표토를 보전하기 위한 단기적 관점의 대책 수립을 위한 웹GIS 기반 단일 강우에 의한 표토침식량을 예측하는 시스템을 개발하였다. 본 연구는 크게 표토침식 예측 모듈 개발과 정확성 평가를 위한 시험포 단위 모니터링 그리고 모듈을 적용한 웹GIS 시스템 개발, 시범적용을 위한 강원도 홍천군 자운리 DB 구축으로 구분된다. 표토침식예측 모듈의 정확성을 검증하기 위하여 가로 4m ${\times}$ 세로 22m, 경사도 3%, 9% 시험포 2개를 조성, 2015년 5월 11일부터 2015년 11월 23일까지 강우량, 유출량, 표토침식량을 조사하였으며, 웹 GIS 시스템은 Open Source Software인 Geoserver, PostGIS, OpenLayers를 활용하여 개발하였다. 마지막으로 개발된 웹GIS 표토침식예측시스템의 시범적용을 위하여 강원도 홍천군 자운리의 농경지 경계, 경사도, 경사장, 작물특성 등에 대한 GIS DB를 구축하였다. 시험포 모니터링 결과 강우발생일수는 총 64일로 관측되었고, 이중 유출은 총 30회가 발생되었다. 이 결과를 활용하여 표토침식 예측 모듈을 검증한 결과 3 % 시험포의 유출량 NSE : 0.88, $R^2$ : 0.91, 표토침식량 NSE : 0.87, $R^2$ : 0.90, 9 % 시험포의 유출량 NSE : 0.76, $R^2$ : 0.82, 표토 침식량 NSE : 0.82, $R^2$ : 0.88로 나타났다. 웹GIS 표토침식 예측 시스템은 Layer 정보, 맵, GIS tool, 경작기 정보, 날씨 정보 등으로 구성되어 있으며, 기상청 Open API와 연동하여 당일의 강수량 예보 데이터와 표토침식량 산정 모듈을 이용하여 예측 표토 침식량 데이터를 제공한다. 하루가 지나면 기상청에서 실측한 강수량 데이터를 이용하여 표토 침식량 산정모듈이 자동적으로 수행된 뒤 실측 강우량에 대한 표토침식량 정보가 제공된다 본 연구에서 개발된 웹GIS기반 표토침식 예측 시스템은 시범 대상 유역인 강원도 홍천군 자운리 유역을 대상으로 구축되었으며, 지속적으로 대상유역을 확대할 계획이다.

  • PDF

Urban Heat Island Intensity Analysis by Landuse Types (토지이용 유형별 도시열섬강도 분석)

  • Je, Min-Hee;Jung, Seung-Hyun
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.11
    • /
    • pp.1-12
    • /
    • 2018
  • Heat waves during summer cause a qualitative degradation in urban environments and increases the number of patients who suffer from heat-related illnesses, and the urbanization deepens these problems. It is a prerequisite to analyze the current status accurately in order to assess the urban heat island phenomenon. Thus, this study aims to collect weather measurements information at the occurrence of a severe heat wave in Seoul, thereby allowing analysis of information, which will also consider the land use type. The weather measurement information used in the analysis had an advantage, as the gap between measured locations is considerably shorter than before due to the miniaturization of the automatic weather systems (AWS), which are connected through the communication network. Based on the above collected information, a temporal change in the data due to land use type was analyzed. As a result, the difference in temperature change in response to the land use type could be compared, as could the occurrence pattern of the tropical night phenomenon, and the effect on temperature reduction in green belt areas could be identified through the comparison of the intensity of heat island by time and land use. The methods and results derived in this study through the comparative analysis in terms of time and land use, weather information measurements, and mapping can be utilized as foundational data that can be referred to in urban planning to reduce the heat island phenomenon in the future.

Development of Snow Depth Frequency Analysis Model Based on A Generalized Mixture Distribution with Threshold (최심신적설량 빈도분석을 위한 임계값을 가지는 일반화된 혼합분포모형 개발)

  • Kim, Ho Jun;Kim, Jang-Gyeong;Kwon, Hyun-Han
    • Journal of Korean Society of Disaster and Security
    • /
    • v.13 no.4
    • /
    • pp.25-36
    • /
    • 2020
  • An increasing frequency and intensity of natural disasters have been observed due to climate change. To better prepare for these, the MOIS (ministry of the interior and safety) announced a comprehensive plan for minimizing damages associated with natural disasters, including drought and heavy snowfall. The spatial-temporal pattern of snowfall is greatly influenced by temperature and geographical features. Heavy snowfalls are often observed in Gangwon-do, surrounded by mountains, whereas less snowfall is dominant in the southern part of the country due to relatively high temperatures. Thus, snow depth data often contains zeros that can lead to difficulties in the selection of probability distribution and estimation of the parameters. A generalized mixture distribution approach to a maximum snow depth series over the southern part of Korea (i.e., Changwon, Tongyeoung, Jinju weather stations) are located is proposed to better estimate a threshold (𝛿) classifying discrete and continuous distribution parts. The model parameters, including the threshold in the mixture model, are effectively estimated within a Bayesian modeling framework, and the uncertainty associated with the parameters is also provided. Comparing to the Daegwallyeong weather station, It was found that the proposed model is more effective for the regions in which less snow depth is observed.

Evaluation of Practical Requirements for Automated Detailed Design Module of Interior Finishes in Architectural Building Information Model (건축 내부 마감부재의 BIM 기반 상세설계 자동화를 위한 실무적 요구사항 분석)

  • Hong, Sunghyun;Koo, Bonsang;Yu, Youngsu;Ha, Daemok;Won, Youngkwon
    • Korean Journal of Construction Engineering and Management
    • /
    • v.23 no.5
    • /
    • pp.87-97
    • /
    • 2022
  • Although the use of BIM in architectural projects has increased, repetitive modeling tasks and frequent design errors remain as obstacles to the practical application of BIM. In particular, interior finishing elements include the most varied and detailed requirements, and thus requires improving its modelling efficiency and resolving potential design errors. Recently, visual programming-based modules has gained traction as a way to automate a series of repetitive modeling tasks. However, existing approaches do not adequately reflect the practical modeling needs and focus only on replacing siimple, repetitive tasks. This study developed and evaluated the performance of three modules for automatic detailing of walls, floors and ceilings. The three elements were selected by analyzing the man-hours and the number of errors that typically occur when detailing BIM models. The modules were then applied to automatically detail a sample commercial facility BIM model. Results showed that the implementations met the practical modeling requirements identified by actual modelers of an construction management firm.

Improvement plan for the Sediment discharge survey (지표부유사 선정을 통한 유사량 조사 개선방안)

  • Lee, Dae Wung;Lee, Jung Hoon;Choi, Da Ye;Lee, Chung Dea;Lee, Sin Jae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.426-426
    • /
    • 2022
  • 하천에서 유사량은 침식(Erosion), 유송(Transport), 퇴적(Deposition)의 3단계 과정으로 진행되며 이 과정에서 다양한 유사 문제가 수반되고 있다. 특히, 하상변동의 예측, 하천계획 수립 등 수자원 개발을 위해 유사량 조사는 반드시 필요하다. 따라서 국외에서는 오래전부터 하천 유사이송과정에 대한 이론적인 개념을 정립하고 양질의 유사량 자료를 위해 연구해 오고 있다. 국내에서는 대표적으로 한국수자원조사기술원에서 유사량조사 업무를 수행하고 있으며 국가유사량관측망 중 매년 약 20개소~30개소의 지점을 대상으로 신뢰성 있는 자료를 만들기 위해 지속적으로 연구하고 있다. 유사량 조사의 항목 중 부유사 채취를 위한 측선수는 하천 폭(ISO 기준)에 따라 5개~7개의 측선에서 부유사를 채취하고 있으며, 강우가 활발한 홍수기 전, 후로 단면측량 및 하상토 자료를 통해 총유사량을 산정하고 있다. 본 연구의 분석방법으로는 이신재(2021)가 제안한 방법을 착안하였고, 측선별 부유사농도와 평균부유사농도의 비교분석 통해 상관계수(R2)가 가장 높은 측선을 선택하여 지표부유사량(Index Suspended Sediment) 산정에 활용하였다. 대상지점으로는 연속 유사량 자료 생산이 가능한 낙동강유역의 함안군(계내리) 관측소와 영산강유역의 구례군(구례교) 관측소를 선정하였다. 먼저, 지표 유사량은 평균부유사농도와 측선별 부유사농도를 비교분석하였으며, 함안군(계내리) 관측소는 5번 측선(R2=0.9869), 구례군(구례교) 관측소는 2번 측선(R2=0.9929)을 통해 지표부유사량을 산정하였다. 그 결과 하천특성에 따라 측정된 부유사량과 지표부유사량의 편차율(함안군(계내리) : 최대 33%, 최소 1%, 구례군(구례교) : 최대 25%, 최소 1%)이 다소 상이한 구간이 발생하였지만 이들의 상관계수(R2)는 각각 0.9922, 0.9947로 매우 높게 산정되었다. 이러한 결과를 통해 제시한 지표 설정은 실제 업무에서 활용 가능할 것으로 판단되며, 추후 과거년도의 하천특성과 수리특성 분석을 통해 해당지점의 대표적인 측선을 선정해 연속적인 지표 유사량 자료 생산이 가능하다면 향후 자동 유사량 채수장치 설치를 통해 안정된 유사량 자료 제공이 가능할 것으로 기대된다.

  • PDF

Methodology for Estimating Highway Traffic Performance Based on Origin/Destination Traffic Volume (기종점통행량(O/D) 기반의 고속도로 통행실적 산정 방법론 연구)

  • Howon Lee;Jungyeol Hong;Yoonhyuk Choi
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.23 no.2
    • /
    • pp.119-131
    • /
    • 2024
  • Understanding accurate traffic performance is crucial for ensuring efficient highway operation and providing a sustainable mobility environment. On the other hand, an immediate and precise estimation of highway traffic performance faces challenges because of infrastructure and technological constraints, data processing complexities, and limitations in using integrated big data. This paper introduces a framework for estimating traffic performance by analyzing real-time data sourced from toll collection systems and dedicated short-range communications used on highways. In particular, this study addresses the data errors arising from segmented information in data, influencing the individual travel trajectories of vehicles and establishing a more reliable Origin-Destination (OD) framework. The study revealed the necessity of trip linkage for accurate estimations when consecutive segments of individual vehicle travel within the OD occur within a 20-minute window. By linking these trip ODs, the daily average highway traffic performance for South Korea was estimated to be248,624 thousand vehicle kilometers per day. This value shows an increase of approximately 458 thousand vehicle kilometers per day compared to the 248,166 thousand vehicle kilometers per day reported in the highway operations manual. This outcome highlights the potential for supplementing previously omitted traffic performance data through the methodology proposed in this study.