• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1305-1310
• /
• 2014

MR(Magneto-Rheological) damper generates the magnetic shear force due to the cohesiveness of MR fluid influenced by a magnetic field. MR fluid consists of magnetic particles and a base liquid. In the present study, the damping forces of MR damper were investigated for density 1.3, 1.5 and $1.7g/cm^3$, and viscosity 1000 and 10000cp, and for the change of orifice shapes. It was found that the increase in the density and viscosity of MR fluid could change the damping force of MR damper due to the magnetic effects. Also, the damping forces on orifice shapes increased as the orifice gap and length decreased. These results showed that the properties of MR fluid and orifice shapes were important for the optimum design of MR damper.

• Journal of Sensor Science and Technology
• /
• v.7 no.1
• /
• pp.51-60
• /
• 1998

La-modified $PbTiO_{3}$(PLT) thin plates were prepared for the fabrication of PLT pyroelectric IR sensors. The effects of the preparation parameters such as tile sintering temperature, the La content, and the ambient powder quantity, on the microstructural and dielectric properties of PLT thin plates were investigated by X-ray diffraction, scanning electron microscope, and measurements of relative density and dielectric properties. With an increased La content, the tetragonality c/a was decreased but the densification and the grain size were increased, which is considered to be due to the increased Pb vacancy concentration to maintain charge neutrality at the increased of La content. When the quantity of the ambient powder wvas increased, the tetragonality was slightly increased, which is believed io be due to the reduced evaporation of PbO. But the e(fect is insignificant compared to that of La content. The dielectric constant at room temperature was increased and the Curie temperature was decreased in accordance with the decreased tetragonality ratio c/a with the increase of La content. The dielectric constant and tan ${\delta}$ of $500{\mu}m$ thick PLT thin plate with 10 wt% excess PbO and 10 mol% La contant sintered at $1250^{\circ}C$ for 2 hours in ambient powder of $0.02\;g/cm^{3}$ were 360 and 0.02, respectively.

• Applied Chemistry for Engineering
• /
• v.4 no.2
• /
• pp.284-290
• /
• 1993

The soap-free emulsion polymerization was carried out for Styrene/Butadiene system with Acrylonitrile as hydrophilic comonomer and KPS as initiator. Under the condition of below 50% conversion, the dependence of Rp on $[AN]^n$ and $[KPS]^n$ was found to be n=1.617-1.050 and n=0.83-0.96 for [AN] and [KPS], respectively. The effect of $[AN]^n$ and $[KPS]^n$ on particle number density (Np) was determined to be n=1.533 and n=0.733, respectively. The highest conversion was obtained under the conditions of pH=5 and ratio of total monomer (g) to water (g)=0.5. The mechanical properties of SBR obtained in this experiment were shown to be inferior to commercial SBR in terms of tensile strength, 300% modulus and elongation. It was found that cure rate of SBR prepared in this experiment was faster than that of commercial SBR.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.88-88
• /
• 2001

최근 들어 초지기의 고속화, 원료의 저급화, 가공작업의 온라인화에 따라 초지기 상에서 안 정된 조업성이 더욱 중요하게 부각되고 있다. 이러한 초지 시스랩의 변화에 따라 사이징 효과의 발현 속도에 대한 관심이 고조되고 있다. 중성 사이징 시스템으로 ASA를 적용할 경우에는 초지기상에서 사이즈도의 대부분이 발현되기 때문에 온라인 후가공 작업의 안정성이 향상되며 사이즈프레스에서 조업성 역시 개선될 수 있을 것으로 기대된다. 본 연구에서는 가격이 저렴하고 국내 수급이 용이한 옥수수 양성전분을 ASA 유화안정제로 이용하기 위해서 OSA (Octenyl Succinic Anhydride)를 이용한 에스테르화 및 산가수분해를 통하 여 ASA 에멀션의 안정성 및 사이징 효과를 개선시킨 전분을 개발하고 그 효과를 규명하고자 하였 다. 이를 위해 전분을 FT-IR을 이용하여 분석하고 호액의 pH, 전기전도도, 전하밀도, 점도 변화 등 을 측정하였을 뿐 아니라 ASA 유화액의 pH, 전기전도도, 시간에 따른 가수분해 안정성 등을 평가 하였다. 또한 ASA 에멀션의 입도 변화 섬유에 대한 흡착특성과 수초지의 사이즈도를 평가하였다. 그 결과는 다음과 같았다. 첫째,OSA 전분의 사용에 따라 전분 호화액의 pH와 전기전도도의 변화는 나타나지 않았 다. 전하밀도는 첨가량이 증가할수록 감소하였으며 호화액의 점도는 상숭하였다. 또 OSA 전분의 적 용이 수초지의 사이즈도에는 영향을 주지 않았다. 그러나 OSA 전분을 사용하여 제조된 ASA 유화 액의 가수분해 안정성은 향상되었다. 이것은 콜로이드 상의 ASA 입자를 캡슐화 하는데 있어 소수성 을 띠고 있는 OSA 전분이 보다 강하고 안정하게 흡착하기 때문인 것으로 판단되었다. 둘째, 전분의 호화 시 H2S04을 사용하여 전분의 산 가수분해를 유도할 수 있었다. 이를 통 하여 전분 호화액의 pH는 낮아지고 전기전도도는 증가하였으나 전하밀도의 변화는 없었다. 또한 겔 화 온도가 낮아지고 저온에서의 점도가 상승하는 변화를 나타냈다. IN-H2S04를 2.3%까지 첨가하였 을 때 ASA 에멀션의 입도가 더욱 감소하였고 섬유에 대한 흡착량이 증가하였으며 수초지의 사이즈 도가 향상되었다. 특히 기존에 사용되어 오던 감자 양성전분에 비해 최대 90%까지 사이즈도의 향상 이 있었다.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.426-434
• /
• 2008

A space averaged $SiH_4/O_2/Ar$ simulator for the high density inductively coupled plasma sources for $SiH_4/O_2/Ar$ discharge is developed. The developed simulator uses space averaged fluid equations for electrons, positive ions, negative ions, neutral species, and radicals in $SiH_4/O_2/Ar$ plasma discharge, and the electron heating model including the anomalous skin effect. Using the developed simulator, the dependency of the density of charged particles, neutral particles, and radicals, the electron temperature, the plasma resistance, and the power absorption coefficient for the RF power and pressure is calculated.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2006

Non-thermal plasma technology for air pollution control, which are NOx, SOx, VOCs, soot, etc., is reviewed. In the early parts of the paper, generation of non-thermal plasma and plasma chemical process are introduced to provide an appropriate plasma condition (electron energy density) for treating air pollutions. Recent results on numerical simulation, optical diagnostics, and gas treatment are provided to characterize an optimal design of plasma generation and plasma chemical process. These data are also helpful to understand unique features of non-thermal plasma process that is achieved with relatively low temperature conditions, i.e. low enthalpy conditions of the treated gas molecules. In the later parts of the paper, several examples of recently developed non-thermal plasma techniques are illustrated, in which technical and economical assessments of the present techniques are provided.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.3
• /
• pp.21-27
• /
• 2012

Estimating the thermal conductivity of clayey soils is important for enhancing the performance of geoengineering structures in cold regions and clay barriers for nuclear waste repositories, but specimen disturbance, saturation, and heat boundary conditions of the test apparatus hinder reliable measurements of the thermal conductivity of saturated clayey soils. This paper presents the results of an experimental study carried out using modified consolidation tests with the needle probe method to measure thermal conductivity. Experimental consolidation tests with saturated kaolinite were performed to investigate the effect of effective stress and dry density on thermal conductivity for saturated kaolinite. In addition, thermal conductivity of soil particles were thoroughly investigated and experimental results were used to evaluate the accuracy of the models to predict thermal conductivity.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.3
• /
• pp.29-37
• /
• 2010

This study aims at evaluating the engineering properties of very poor graded fine sands deposited on the sea. Using materials sampled at SAEMANKEUM area, a series of rowe cell consolidation tests and triaxial compression tests are conducted in order to evaluate the characteristics of deformation and shear strength by the relative density. Prior to those tests, a maximum and a minimum relative densities are obtained. As a result, it appears that the minimum void ratio is 0.88, and the maximum compactible relative density is about 71%. In addition, internal frictional angle appears to increase linearly with an increase of the relative density which is similar to that of the port KUNJANG.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.68-73
• /
• 2017

The removal of particulate matter ranging from $0.01{\mu}m{\sim}10{\mu}m$ can be performed by using membrane filters composed of fibers. Electrospinning techniques offer the production of very thin fibers with a uniform fiber diameter over conventional techniques including template synthesis, melt-blown, phase separation, etc. Air filtration will be improved with electrospun membranes due to the open pore structures, high porosity, and large surface area of the membranes. In the present study, filtration efficiency increased with pore size decrease and fiber density increase induced by carbon nanotube and the increased CA (cellulose acetate) concentration during electrospinning process.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.31-36
• /
• 2003

In this study, nano-sized NiCuZn-ferrites for the multi-layered chip inductor application were prepared by a coprecipitation method and its electromagnetic properties were analyzed. Also, the property of low temperature sintering were studied with the initial heat treatment of powder.$(Ni_{0.4-x}Cu_xZn_{0.60})_{1+w}(Fe_2O_4)_{1-w}$ (x=0.2, w=0.03) were calcined at $300^{circ}C~750^{circ}C.$ The sintered NiCuZn-ferrites at $900^{\circ}C$ showed good apparent density $4.90g/cm^3,$ and magnetic properties of initial permeability 164 and quality factor 72. As the calcination temperature increase, the grain size of NiCuZn-ferrite increased with irregular grain distribution and its magnetic properties were deteriorated.