• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.446-447
• /
• 2010

본 논문에서는 전동기의 고정자 권선 절연파괴 고장을 분석하고 자기 인덕턴스 변화의 비선형성을 고려하기 위해 FEM 시뮬레이션을 이용하여 고장 현상을 해석하고, 실험을 통해 검증하였다. 제안한 고장의 모델링을 통하여 고정자 권선에서 단락이 발생하면 단락된 권선의 순환전류에 의해 고정자에 자기 포화현상이 발생하고, 입력전류의 불평형에 의하여 평균토크가 감소하고, 토크리플이 증가함을 확인 하였다.

• 대한전기학회논문지
• /
• 제38권5호
• /
• pp.380-387
• /
• 1989

The Conventional-Anti-reset-Windup (CAW) structure gives pretty good performance among the conventional strategies that prevent systems from saturation, but there is no systematic way of designing the control systems. Also, it frequently destabilizes the systems. Moreover, the CAW structure cannot be applied when the output of the saturating actuator cannot be measured. Therefore the CAW structure is modified to accommodate this situation. An effective designing method is proposed to give better performance of the control system. The stability of the control system is also considered. The usefulness of the proposed method is shown by applying this method to a few examples.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1999년도 제13회 학술강연논문집
• /
• pp.23-23
• /
• 1999

일반적인 제어대상 시스템을 모델링하여 제어기를 설계할 경우 시스템을 제어하는 액츄에이터의 saturation 현상을 무시하고 설계하는 경우가 자주 있다. 만일 시스템이 SISO이며, 충분히 안정하고 동적 특성이 빠른 경우에는 saturation 무시가 주는 영향이 크게 나타나지 않지만, 만일 시스템이 MIMO이며 비선형일 경우 비선형 요소인 입력 saturation에 의하여 시스템의 특성이 변형되고 크게는 불안정화 된다.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.88-95
• /
• 2006

In this paper, the gain-scheduled control design proposed in the previous paper has been applied to a target tracking system. In such system, it is needed to attenuate disturbance effectively as long as control input satisfies the given constraint on its magnitude. The scheduled gains are derived in the framework of linear matrix inequality(LMI) optimization by means of the MatLab toolbox. Its effectiveness is verified along with the simulation results compared with the conventional optimum constant gain and the scheduled gain control with constant Q matrix cases.

• 한국정밀공학회지
• /
• 제23권6호
• /
• pp.81-87
• /
• 2006

A new gain-scheduled control design is proposed to improve disturbance attenuation for systems with bounded control input. The state feedback controller is scheduled according to the proximity to the origin of the state of the plant. The controllers is derived in the framework of linear matrix inequality(LMI) optimization. This procedure yields a linear time varying control structure that allows higher gain and hence higher performance controllers as the state move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.65-73
• /
• 2007

In this paper, the gain scheduled state feedback and disturbance feedforward control design proposed in the previous paper has been applied to a simple matching system and a turret stabilization system. In such systems, it is needed to attenuate disturbance response effectively as long as control input satisfies the given constraint on its magnitude. The scheduled control gains are derived in the framework of linear matrix inequality(LMI) optimization by means of the MatLab toolbox. Its effectiveness is verified along with the simulation results compared with the conventional optimum constant gain control and the scheduled state feedback control cases.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.72-78
• /
• 2006

The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.915-920
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_{2}-gain$ from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.59-65
• /
• 2007

A new optimal state feedback and disturbance feedforward control design in the sense of minimizing $L_2$-gain from disturbance to control output is proposed for disturbance attenuation of systems with bounded control input and measurable disturbance. The controller is derived in the framework of linear matrix inequality(LMI) optimization. A gain scheduled state feedback and disturbance feedforward control design is also suggested to improve disturbance attenuation performance. The control gains are scheduled according to the proximity to the origin of the state of the plant and the magnitude of disturbance. This procedure yields a stable linear time varying control structure that allows higher gain and hence higher performance controller as the state and the disturbance move closer to the origin. The main results give sufficient conditions for the satisfaction of a parameter-dependent performance measure, without violating the bounded control input condition.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.61-67
• /
• 2006

본 논문에서는 Poly-Si의 불규칙한 Grain boundary 분포로 인해 발생하는 문턱전압의 변화에 대해서도 일정한 전류를 흘려줄 수 있는 전류원을 제안하였다. 기존의 문턱전압 보상 전류원에 비해 넓은 입력전압 범위에서도 포화영역의 특성이 매우 향상되었으며 문턱전압의 변화에 따른 전류의 오차를 감소시킬 수 있었다. 마지막으로 HSPICE 시뮬레이션 과정을 통해 Poly-Si TFT의 특성곡선과 제안된 전류원의 특성곡선을 비교하였으며 각각의 입력전압에 대한 문턱전압의 변화에 따른 출력전류의 상대오차를 측정하였다.