• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.58-62
• /
• 2006

본 연구는 SMS의 RMA-2를 이용한 하천흐름 해석에서 WMS HEC-1으로 모의된 하천 본류 및 지류의 수리량을 동적인 경계 입력자료로 하여 다양한 시나리오별로 하천내의 흐름 영향을 파악하고자 하였다. 안성천 유역의 공도와 평택수위관측소 구간(10.5 km)에 대하여 WMS로 모의한 50, 100, 500, 1000년 빈도별 시단위 유량을 본류 및 3개 지류의 유량 경계조건으로 적용하여 하천의 수리학적 특성을 분석하였다. SMS RMA-2의 동적 조건(dynamic condition)으로 구동한 결과, 하천 본류구간의 시간별 수위 및 유속분포를 모의할 수 있었다. 빈도를 증가시킬수록 측점별 평균 유속과 수위가 증가함을 확인할 수 있었으며, 특히 지류가 유입되는 본류지점의 가까운 하류부에서 하천 폭이 좁으면 유속이 크게 증가하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.376-378
• /
• 2001

영상 정보에 기반한 지능형 교통 정보 시스템(ITS)의 응용 분야에서, 차량의 그림자 제거와 겹침 차량을 분리하기 위하여 3차원 물체의 특징을 이용하며 차량 형상을 분리하는 기법을 제안한다. 제안하는 기법은 차량을 분리하기 위하여 연속 프레임에서 배경을 수정하고, 배경 영상과 현재 입력 영상의 차이를 이용한다. 또한 그림자를 제거하고 겹침 차량을 분리하기 위하여, 1) 3차원 증거를 차량 증거 영역에서 검출하여 군집화하고, 2) 독립 차량의 중심 위치를 판단하고, 3) 다시 임계치에 의해 차량의 형상을 분리한다. 단순 임계치에 의해 차량을 분리하는 기법은 기상조건 등에 민감하기 때문에 여러 조건에 따라 다른 알고리즘을 적용해야 하지만 제안하는 기법은 동일한 알고리즘으로 여러 기상조건에 적응이 가능하다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.289-294
• /
• 1998

본 논문에서는 상태행렬과 입력행렬에 시변 불확실성이 있는 선형시스템에 대한 강인 추적 제어기를 제안한다. 본 논문에서 대상으로 하는 불확실성은 block-diagonally structured uncertainty와 norm bounded uncertainty인데 모두 정합 조건을 만족시킬 필요는 없다. 폐루프 시스템이 불확실성하에서 안정할 수 있는 조건을 제시하고 이 조건이 선형행렬 부등식으로 나타낼 수 있음을 보인다. 추적 오차를 줄이고 오차 감소 비율을 증가시킬 수 있는 최적화 방법도 제아한다. 또한 불확실성의 크기가 0으로 줄어들면 추적 오차도 0으로 줄어듬을 보인다.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.35-38
• /
• 2002

Recently, They are usually recording the patient information on the Hospital Information System. In the department of Radiology, For the purpose of assuming patient exposed dose, Authors contrived the mathematical calculation model by use of x-ray out put data on the Excel program, if they in put the exposure factors (kVp, mAs, thickness), the program could automatically calculate the patient Skin dose. The assuming data by three dimensional equation has average errors within ${\pm}5%$, there for We could make good use of clinical field in department of radiology.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.4
• /
• pp.18-32
• /
• 1995

Fuzzy rules, developed by experts thus far, may be often inconsistent and incomplete. This paper proposes a new methodology for automatic generation of fuzzy rules which are nearly complete and not inconsistent. This is accomplished by simulating a knowledge gathering process of humans from control experiences. This method is simpler and more efficient than existing ones. It is shown through simulation that our method even generates better rules than those generated by experts, under fine tuned parameters.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.73-78
• /
• 2007

It has been increasing that significant loss of life and property due to global wanning and extreme weather, and the climate and temperature changes in Korea Peninsula are now greater than the global averages. Climate information from regional climate models(RCM) at a finer resolution than that of global climate models(GCM) is required to predictclimate and weather variability, changes, and impacts. The new surface boundary conditions(SBCs) development is motivated by the limitations and inconsistencies of existing SBCs that have influence on model predictability. A critical prerequisite in constructing SBCs is that the raw data should be accurate with physical consistency across all relevant parameters and must be appropriately filled for missing data if any. The aim of this study is to construct appropriate SBCs for the RCM in Asia domain which will be used for the prevention of disasters due to climate changes. As all SBCs have constructed onto the 30km grid-mesh of the RCM suitable for Asia applications, they can be also used for other distributed models for climate and hydrologic studies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.170-175
• /
• 2016

In order to transmit baseband signals through frequency dividing devices, we studied the transfer function of the device in the term of the baseband signal distortion. From the analysis, it is shown that the magnitude of the envelope signal is related to the mixer gain and the insertion loss of the low pass filter whilst the phase is the additional function with the 1/2 of the phase delay. For the purpose of the verification of the study, we designed a dynamic frequency divider at 1,400 MHz. The operating frequency range of the device is closely related to the conversion gain of mixers and the amplitude of input signal, and becomes wide as the conversion gain of mixers increases. The designed frequency divider operates between 0.9 GHz and 3.2 GHz, for -14.5 dBm input power. The circuit shows 20 mW power dissipation at $V_{DD}=2.5V$, and the simulation result shows that an amplitude modulated signal at 1,400 MHz with the modulation index of 0.9 was successfully downconverted to 700 MHz.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.4
• /
• pp.246-251
• /
• 2017

Crop models have been used to predict a heading date for efficient management of fertilizer application. Recently, the ORYZA (v3) model was developed to improve the ORYZA2000 model, which has been used for simulation of rice growth in Korea. Still, little effort has been made to assess applicability of the ORYZA (v3) model to rice farms in Korea. The objective of this study was to evaluate reliability of heading dates predicted using the the ORYZA (v3) model, which would indicate applicability of the model to a decision support system for fertilizer application. Field experiments were conducted from 2015-2016 at the Rural Development Administration (RDA) to obtain rice phenology data. Shindongjin cultivar which is mid-late maturity type was grown under a conventional fertilizer management, e.g., application of fertilizer at the rate of 11 Kg N/10a. Another set of heading dates was obtained from annual reports at experiment farms operated by the National Institute of Crop Science and Agricultural Technology Centers in each province. The input files for the ORYZA (v3) model were prepared using weather and soil data collected from the Korean Meteorology Administration (KMA) and the Korean Soil Information System, respectively. Input parameters for crop management, e.g., transplanting date and planting density, were set to represent management used for the field experiment. The ORYZA (v3) model predicted heading date within 1 day for two seasons. The crop model also had a relatively small error in prediction of heading date for three ecotypes of rice cultivars at experiment farms where weather input data were obtained from a near-by weather station. Those results suggested that the ORYZA (v3) model would be useful for development of a decision support system for fertilizer application when reliable input data for weather variables become available.

• Journal of the Korea Society for Simulation
• /
• v.32 no.1
• /
• pp.45-54
• /
• 2023

Under combat simulation environment when inputting the detection performance data of the real system into the simulated object the given data affects the simulation analysis result. ACQUIRE-Target Task Performance Metric (TTPM)-Target Angular Size (TAS) model is used as a target acquisition model to simulate the detection ability of entities in the main combat simulation tool. This model estimates the decomposition curve of the object sensor and output the detection distance according to the target type. However, it is not easy to apply the performance of the new detection object that the user wants to input to the target acquisition model. Users want to input the detection distance into the target acquisition model, but the target acquisition model requires sensor decomposition curve data according to encounter conditions. In this paper, we propose a method of inversely deriving the sensor decomposition curve data of the target acquisition model by taking the detection distance to the target as an input. Here, the sensor decomposition curve data simultaneously satisfies each detection distance for three types of targets: personnel, ground vehicles, and aircraft. Finally, the detection distance of various reconnaissance equipment is applied to the detection object, and the detection effect according to the reconnaissance equipment is analyzed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.6
• /
• pp.517-522
• /
• 2017

Launch Acceptability Region(LAR) is a region for an aircraft which carries air-to-ground guided bombs to enter such that it can successfully hit the target. LAR should consider the release condition of an aircraft, impact condition for targets, and environmental condition of atmosphere. In this paper, LAR algorithm was developed using the database of many simulations which were varied by inputs, such as the release, impact, and environmental conditions. The algorithm was tested through the direct simulation results, and found that it was suitable to apply as LAR for air-to-ground guided bomb.