• Resources Recycling
• /
• v.29 no.6
• /
• pp.3-14
• /
• 2020

This study aims to introduce and review on the recovery technologies of rare earth elements(REEs) from coal ash. Many researchers have been carried out by various beneficiation processes, such as particle size separation, magnetic separation, specific gravity, and flotation to recover rare earth elements from coal ash generated from Pulverized Coal(PC) boiler. Through the beneficiation process, it was confirmed that concentration of rare earth elements was much lower than the 4,700 ppm, and that additional enrichment treatment through wet process was needed for the products recovered after the beneficiation process. It was confirmed that the rare earth elements contained in coal ash were applied to the leaching process after pretreatment such as alkali-fusion to improve leaching efficiency. Although beneficiation and leaching methods have been studied, its optimum recovery technologies for rare earth elements not been confirmed up to now, research on the recovery of rare earth contained in coal ash is reported to continue. In case of Korea, the technology for the recovery of rare earth elements from coal ash and coal by-product could not been confirmed up to present. In these reasons, it is urgent to develop technologies such as beneficiation and leaching process continuously.

• Korean Journal of Ichthyology
• /
• v.33 no.4
• /
• pp.262-272
• /
• 2021

The egg development and early life history of Tribolodon hakonensis that collected from the Seomjin River were studied. The fertilized eggs of the T. hakonensis were slightly adhesive and separated with a yellow yolk and no oil globule. The size of the eggs was an average of 2.89 mm (2.79~2.96) in diameter. Fifty percents of the embryos were hatched in about 63 hrs after fertilization at water temperature of 20℃. The newly hatched larvae showed average 6.92 mm (6.09~7.60) in total length. At 8 days after hatching, they were 13.75±0.67 mm (n=10) in total length and their yolk sacs were completely absorbed, opening mouth and anus (postflexion larvae stage). At 40 days after hatching, they became juvenile and reached 26.99±1.82 mm (n=10) in total length and all their fin rays were formed. At 137 days after hatching, the young fish were 72.63±10.7 mm (n=10) in total length and their body shape, color and behavior were similar to those of adult fish. The size of eggs and the larva after hatching significantly affected the initial growth among groups of genus Tribolodon, and the hatching time of fertilized eggs and the growth rate of the early life history according to the water temperate were different.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.2
• /
• pp.1-24
• /
• 1978

To obtain basic information on the breeding of early maturing, short culm naked-barley varieties, the following 10 varieties, Ehime ＃ 1, Shikoku ＃42, Yamate hadaka, Eijo hadaka, Kagawa ＃ 1, Jangjubaeggwa, Baegdong, Cheongmaeg, Seto-hadaka and Mokpo ＃42 were used in diallel crosses in 1974. Heading date, culm length and grain yield per plant for the parents, $F_1's$ and $F_2's$ of the 10X10 partial diallel crosses were measured in 1976 for analysis of their combining ability, heritability and inheritance. The results obtained are summarized below; 1. Heritabilities in broad sense for heading date, culm length and grain yield per plant were 0.7831, 0.7599 and 0.6161, respectively. Narrow sense heritabilities for heading date were 0.3972 in $F_1$ and 0.7789 in $F_2$ and for culm length 0.6567 in $F_1$ and 0.6414 in $F_2.$ These values suggest that earliness and culm length could be successfully selected for in the early generations. Narrow sense heritability for grain yield was 0.3775 in $F_1$ and 0.4170 in $F_2.$ 2. GCA effects of the $F_1$ and $F_2$ generations for days to heading were high in the early direction for early-heading varieties, while for late-heading varieties the GCA effects were high in the late direction. Absolute values for GCA effects in $F_1$ were higher than in $F_2.$ SCA effects of the $F_1$ and $F_2$ generations were high in the early-heading direction for Shikoku ＃ 42 x Mokpo ＃ 42, Ehime ＃ 1 x Yamate hadaka, Shikoku ＃ 42 x Yamate hadaka and Shikoku ＃42 x Eijo hadaka. 3. The GCA effects for culm length in the $F_1$ and $F_2$ generations for tall varieties were high in the tall direction while short varieties were high in the short direction. Absolute values for the GCA effects in $F_1$ were higher than in $F_2.$ SCA effects were high in the short direction for the combinations of Mokpo ＃ 42 with Ehime ＃ 1, Yamate had aka and Eijo hadaka. 4. The GCA effects for grain yields per plant in the $F_1$ and $F_2$ generations for varieties with high yields per plant were high in the high yielding direction, while varieties with low yields per plant were high in the low yielding direction. Absolute values of the $F_1$ GCA effects were higher than the $F_2$ effects. The combinations with high SCA effects were Mokpo ＃ 42 x Shikoku ＃ 42, Mokpo ＃ 42 x Seto hadaka and Mokpo ＃ 42 x Cheongmaeg. 5. Mean heading dates of the $F_1$ and $F_2$ generations were earlier than those of mean mid-parent. Mean heading date of the $F_1$ generation was earlier than the $F_2$ generation. Crosses involving early-heading varieties showed a greater $F_1, $ mid-parent difference than crosses involving late-heading varieties. 6. Heading date was controlled by a partial dominance effect. Nine varieties excluding Mokpo ＃ 42 showed allelic gene action. Ehime ＃ 1, Shikoku ＃ 42, Kagawa ＃ 1 and Mokpo ＃ 42 were recessive to the other tested varieties. 7. The $F_2$ segregations of the 45 crosses for days to heading showed that 33 cosses were of such complexity that they could not be explained by simple genetic inheritance. One cross showed a 3 : 1 ratio where earliness was dominant. Another cross showed a 3 : 1 ratio where lateness was dominant. Four other crosses showed a 9 : 7 ratio for earliness while six crosses showed a 9 : 7 ratio for lateness. 8. Many transgressive segregants for earliness were found in the following crosses; Eijo hadaka x Baegdong, Ehime ＃ 1 x Seto hadaka, Yamate had aka x Kagawa ＃ 1, Kagawa ＃ 1 x Sato hadaka, Shikoku ＃ 42 x Kagawa ＃ 1, Ehime ＃ 1 x Kagawa ＃ 1, Ehime ＃ 1 x Shikoku ＃ 42, Ehime ＃ 1 x Eijo hadaka. 9. Mean culm length of the F, and F. generations were usually taller than the mid-parent where tall parent were used. These trends were high in the short varieties, but low in the tall varieties. 10. Culm length was controlled by partial dominace which was gonverned by allelic gene(s). Culm length showed a high degree of control by additive genes. Mokpo ＃ 42 was recessive while Baegdong was dominant. 11. The F_2 frequency for culm length was in large part normally distributed around the midparent value. However, some combinations showed transgressive segregation for either tall or short culm length. From combinations between medium tall varieties, Ehime ＃ 1, Shikoku ＃ 42, Eijo hadaka and Seto hadaka, many short segregants could be found. 12. Mean grain yields per plant of the F_1 and F_2 generations were 6% and 5% higher than those of mid-parents, respectively. The varieties with high yields per plant showed a low rate of yield increase in their F_1's and F_2's while the varieties with low yields per plant showed a high rate of yield increase in their F_1's and F_1's. 13. Grain yields per plant showed over-dominnee effects, governed by non-allelic genes. Mokpo ＃ 42 showed recessive genetic control of grain yield per plant. It remains difficult to clarify the inheritance of grain yields per plant from these data.

• Development and Reproduction
• /
• v.11 no.2
• /
• pp.127-135
• /
• 2007

In order to monitor the developmental features of embryos, larvae, and juveniles of Konoshiro Gizzard Shad Konosirus punctatus, the fertilized eggs were gotton using artificial insemination. Konosirus punctatus were caught in Mankyung-myeon, Kimjae, Jeollabuk-do at June of 2004, and experiments were carried out in Ichthyology laboratory in Chonnam National University. Konosirus punctatus spawned draft egg from March to June. The fertilized eggs were cultured in $19.0{\sim}23.0^{\circ}C$(mean, $21.2^{\circ}C)$. The eggs had spherical shape and the diameter is $1.14{\sim}1.34\;mm$(mean, 1.21 mm). The lens began to appear from 35 hr 53 min after fertilization. At the moment, the movement of larvae was more active, and the tail was separated completely from yolk, the heart had forms, and melanophore appeared. Hatching was observed from 37 hr 10 min after fertilization. The total length of the hatched larvae was $4.26{\sim}5.30\;mm$(mean, 4.96 mm), but the mouth and anus were not opened at the time when the larva had yolk sack, and had $22{\sim}27$ myometium, and the anus located just abdominal front of the tail fin, and melanophore accumulated in the eye. Post-larvae used yolk completely after 2 day of hatching, and the total length was $4.96{\sim}5.74\;mm$(mean, 5.24 mm). From 16 days after hatching, the tail had curved tail end, and appeared the stems for pectoral, dorsal, and caudal fins. At 53 days after hatching, the total length of post-larvae was $27.11{\sim}34.09\;mm$(mean, 30.11 mm), and the frontal part of head developed like an adult one. At this time, fins and body are transferred to those of adult Konosirus punctatus. Fishes have a different shape and location of melanophore even in the same family. This research was tried to elucidate the early developmental features of Konosirus punctatus, together with species-specific pattern of melanophore.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.

• Journal of dental hygiene science
• /
• v.12 no.3
• /
• pp.235-243
• /
• 2012

The purpose of this study was to examine the oral symptoms, self-rated systemic health state and oral health status of industrial workers in a bid to provide some information on oral health education geared toward industrial workers. The subjects in this study were 294 workers who got a medical checkup in Korea Industrial Health Association in North Gyeongsang Province. Those who felt less inconveniences in the oral cavity led a better quality of life related to oral health in every area except physical handicaps (p<.001, p<.01). The men's OHIP-14 was higher than the women's, and the younger workers led a better quality of life related to oral health in the area of social separation(p<.01), and the married ones did in the area of physical handicaps, mental disorder and social separation(p<.05). And the workers whose household income was larger lived a better quality of life related to oral health in the areas of Psychological discomfort, physical handicaps, mental disorder, social disorder and social separation(p<.05). Those who found themselves to be generally in good health(p<.001, p<.05) and whose subjective oral health state was led a better quality of life in every area(p<.001, p<.05). The findings of the study showed that there were differences in the quality of life according to awareness of oral symptoms, general health status and oral health state.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.1
• /
• pp.17-27
• /
• 2023

Weeds are one of the factors that reduce crop yield through nutrient and photosynthetic competition. Quantification of weed density are an important part of making accurate decisions for precision weeding. In this study, we tried to quantify the density of weeds in images of maize fields taken by unmanned aerial vehicle (UAV). UAV image data collection took place in maize fields from May 17 to June 4, 2021, when maize was in its early growth stage. UAV images were labeled with pixels from maize and those without and the cropped to be used as the input data of the semantic segmentation network for the maize detection model. We trained a model to separate maize from background using the deep learning segmentation networks DeepLabV3+, U-Net, Linknet, and FPN. All four models showed pixel accuracy of 0.97, and the mIOU score was 0.76 and 0.74 in DeepLabV3+ and U-Net, higher than 0.69 for Linknet and FPN. Weed density was calculated as the difference between the green area classified as ExGR (Excess green-Excess red) and the maize area predicted by the model. Each image evaluated for weed density was recombined to quantify and visualize the distribution and density of weeds in a wide range of maize fields. We propose a method to quantify weed density for accurate weeding by effectively separating weeds, maize, and background from UAV images of maize fields.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.174-184
• /
• 2015

In the present study, the metabolism of [$^{14}C$]butachlor was investigated in rice plant according to the OECD test guideline No. 501. [$^{14}C$]Butachlor was treated as granule to paddy water by application of 1.5 kg ingredient (a.i.)/ha at the 3~4 leave stage of rice plant. At 85 days after treatment (DAT), samples of panicle, foliage, and roots were taken for radioactivity analysis. Upon harvest at 126 DAT, rice plants were separated into brown rice, husk, straw, and root parts. Amounts of total radioactivity absorbed by rice plant ranged from 8.6 to 9.8% of applied radioactivity (AR). Total radioactive residues (TRRs) of rice plant at 126 DAT was the highest as 4.0421 mg/kg (7.3% AR) in the straw followed by 1.4595 mg/kg (2.4% AR) in the root, 0.7257 mg/kg (0.1% AR) in the husk. The lowest level recording 0.1020 mg/kg (0.1% AR) was found in brown rice. Each part was extracted with various solvents and solvent/water mixtures. Greater than 70% of TRRs was readily extractable from foliage, panicle, husk and straw. Only 34.0% of the brown rice and 43% of root based on TRRs were extractable showing that the residues were completely assimilated in the plant tissue. The level of non-extractable radioactivity was ranged from 26.2 to 66.0% of TRRs. From this study, five tentative major metabolites (M1, M2, M3, M4 and M5) were observed in rice extracts. Among the metabolites, 2,6-diethylaniline assigned as M4 was identified in rice plant by comparing to retention time of reference standard. Un-metabolized butachlor was not detected in any fractions. In soil extracts, N-(butoxymethyl)-N-(2,6-diethyl phenyl)acetamide, 2,6-diethylaniline, M2, M3 and M5 were observed. And the concentration of butachlor was low level (ca. 0.03 mg/kg).

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.181-189
• /
• 2001

Spawning behavior of the Takifugu pardarlis (Temminck et Schlegel) was observed on the Jook-do coast in Tongyong from March 1997 to June 1999. The spawning ground was locted in the intertidal zone between Tongyong and Koje-do. Its bottom was mainly gravels and stones, and its depth was 0.5~1.0 m. Spawning season was from the end of the March to the middle of May. During the spawning season, the mature fishes formed school a of 10~30 individuals, then moved to the spawning ground together. When a mature female spawned eggs, the attendant males fertilized them at the same time. The fertilized eggs obtained from the parent fishes caught at the spawning ground were adhesive, opaque and spherical, measuring 1.14~1.24 mm (mean 1.19 mm, n = 50) in diameter with numerous tiny oil globules. Hatching period was about 205 hours after fertilization at water temperature of $18.0{\pm}0.5^{\circ}C$. The newly hatched larvae were 2.92~3.10 mm (mean 3.01 mm, n = 20) in total length (TL), had a large yolk, and 11~13+14~15 = 25~28 myomeres. At 5 days, the larvae had attained 3.79~3.85 mm (mean 3.82 mm, n = 20) in TL and had transformed into the postlarval stage. At 15 days, the postlarvae had attained 7.78~7.90 mm (mean 7.84 mm, n = 20) in TL. At 21 days, had larvae attained 10.15~10.27 mm (mean 10.21 mm, n = 20) in TL and had reached the juvenile stage. All fins were formed with a complete set of fin rays having the following counts: dorsal fin rays 11~12; anal fin rays 9; pectoral fin rays 14~15; caudal fin rays 11~12.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.3
• /
• pp.75-86
• /
• 2003

In the near future, the capacity of conventional anaerobic digester is thought to be insufficient because of the increase of the total solids from expansion of intercepting sewer, sewage quantity and direct input of night soil from near apartment districts. The objectives of this study was to investigate the improvement of digestion efficiency using microbial agent(Bio-dh). The system was a pilot-scale, two-staged, anaerobic sludge digestion system. The first-stage digester was heated and mixed. The agitation velocity of the first-stage digester was 120rpm. The second-stage digester was neither heated nor mixed. The Digestion temperature was kept at $35{\pm}1^{\circ}C$ The detention time of digester was 19 days. The dosage of sewage sludge and microbial agent were $0.65m^3/day$ and $0.5{\ell}/day$, respectively. The experiments was run for 25days. Three times a week, $COD_{Mn}$ and SS of effluent, TS, VS, and biogas production rate were measured. Temperature, pH, and alkalinity were measured daily. The results were as follows ; Without microbial agent, digestion efficiencies ranged 46.0%~50.9%(mean=48.6%), with microbial agent(Bio-dh), digestion efficiencies ranged 52.8%~57.3%(mean=54.2%). Consequently, microbial agent(Bio-dh) increased the sludge digestion efficiency about 12%. Also, Without microbial agent, the mean concentration of $COD_{Mn}$ and SS of second-stage digester effluent were 1,639mg/L, 4,888mg/L respectively. With microbial agent, the mean concentration of $COD_{Mn}$ and SS of second-stage digester effluent were 859mg/L, 2,405mg/L respectively. Consequently, microbial agent(Bio-dh) increased the removal efficiency of $COD_{Mn}$ and SS about 47.6% and 50.8%, respectively.