• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.6
• /
• pp.397-407
• /
• 2016

The traveling waves of the left and right of the detached breakwater are bent behind the detached breakwater by diffraction, causing phase interference, superimposed and propagated. If the direction of the waves becomes same and they head to the entrance of a port due to the geographical conditions, superimposed wave energy could influence inside of a port. In this study, we investigated the influence of the phase difference of the left and right diffraction waves generated according to the length of the detached breakwater on the wave heights in a port through numerical experiments when the detached breakwater at a port entrance is installed. From this result, it was confirmed that the wave heights in a port is increased or decreased by the influence of superimposed caused by the phase difference of the left and right diffraction waves due to the length of the detached breakwater.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.6
• /
• pp.21-31
• /
• 2017

In the present study, theoretical and numerical analyses have been carried out to investigate the detailed flow characteristics during the mode transition. The theoretical analysis rearranged the knowledge of gasdynamics and the previous studies, and the numerical analysis has conducted to solve the 2D unsteady compressible Navier-Stokes equations with a fully implicit finite volume scheme. To validate the numerical analysis, the experiment was compared with it. The total temperature at the inlet of isolator and the hydrogen fuel equivalent ratio were changed to investigate their effects on the mode transition phenomenon. As the results, the numerical analysis reproduced well the experiment qualitatively, the increment in the hydrogen fuel equivalent ratio induced the scram-mode to ram-mode transition which is discontinuous with a non-allowable region, and the variation in the total temperature changed the boundary of the mode transition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.2985-2992
• /
• 2015

In this study, the characteristics of heat transfer and pressure drop was theoretically analyzed by changing longitudinal pitch, bump phase, location of vortex generator about the staggered tube banks by applying SST (Shear Stress Transport) turbulence model of ANSYS FLUENT v.14. Before carrying out CFD (Computational Fluid Dynamics) analysis, It is presumed that the boundary condition is the tube surface temperature of 363 K, the inlet air temperature of 313 K and the inlet air velocity of 5-10 m/s. The results indicated that the heat transfer coefficient is not affected by the longitudinal pitch and the bump phase of circle type was more appropriate than serrated type in the characteristics of heat transfer and pressure drop. Additionally, in case of vortex generator location, the heat transfer characteristics showed that forward location of tube was more favorable 4.6% than backward location.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.79-93
• /
• 2008

Water quality simulations on the Saemangeum inner reservoir have been carried out using EFDC model to understand water quality variations caused by abrupt physical changes due to closing of tidal barrier. According to hydrodynamic simulation, model reproduces not only outer regional dynamics but also inner superelevation very well. Calibration and verification of water quality models accomplished using observed data taken before closing. Also sensitivity tests regarding riverine discharges and tidal flats were done. Due to enlarging of always wet zone caused by super elevation on inner tidal flats, predicted DO decreases at that region as a result of SOD. Moreover shrink of mixing zone after closing of dike causes deteriorating of water quality showing DO as 2 mg/L during summer at Mangyeong and Dongjin estuaries, however it does not spread to middle part of the reservoir. Vertical stratification occurs after closing and shows vertical differences in DO concentration at least 6 mg/L to 7 mg/L in summer season. Most part of the reservoir is getting stratified and it leads to an oxigen deficit zone near bottom.

• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.104-111
• /
• 2017

The construction of road tunnels and bridges have delivered driving efficiency and stability based on developed engineering technology. Tunnels have the advantage of reducing the deforested area compared with other road construction methods. Since a tunnel is an underground passageway dug through the surrounding soil/earth/rock and enclosed except for the entrance and exit, commonly at each end, it does not cause a large amount of deforestation. This study surveyed the deforested areas at each end of the tunnel by the design of the tunnel entrance and exit and forest topography to minimize the amount of deforestation caused by road construction. A survey was done on a total of 150 tunnels (300 entrances and exits) on several main roads in Korea. The deforested area of each tunnel was collected by a breakdown of the entrance area and the upper area of the tunnel. According to the results of Kruskal-Wallis analysis, it was found that there was statistically a significant relation between the location of tunnels and the amount of deforestation by the topographical access type of the tunnels. The tunnel with 'facing orthogonal to incline' type access caused the smallest deforestation while the the tunnel with 'facing to valley' and 'parallel with incline' type accesses caused large deforestation during tunnel construction. Tunnel positioning in the light of topography can reduce the deforested area by up to 1.5ha at each tunnel.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.82-89
• /
• 2012

The temperature of cryogenic propellant in the propellant tank increases during flight due to heat input from surroundings. The propellant which temperature rises up over the required condition of turbo-pump remains as unusable propellant at the end of flight. In this paper the estimation method of the heat transfer coefficient at the upper layer of cryogenic propellant was presented. The heat transfer mode at the propellant upper layer was considered as conduction. Temperature distributions near propellant surface obtained from heat transfer coefficient were compared with test data to show the possibility of this method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.709-716
• /
• 2011

The temperature of cryogenic propellant in the propellant tank increases during flight due to heat input from surroundings. The propellant which temperature rises up over the required condition of turbo-pump remains as unusable propellant at the end of flight. In this paper the estimation method of the heat transfer coefficient at the upper layer of cryogenic propellant was presented. The heat transfer mode at the propellant upper layer was considered as conduction. Temperature distributions near propellant surface obtained from heat transfer coefficient were compared with test data to show the possibility of this method.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2001.11a
• /
• pp.227-236
• /
• 2001

본 연구는 제천시 새주소 부여사업에서 추진된 새주소 부여를 위한 수치지도상의 건물 및 도로의 데이터베이스와 주 출입구 조사 및 입력, 도로구간 설정, 도로명 제정 및 입력, 건물번호부여 등의 작업과정을 통하여 도시공간정보의 체계적인 관리와 활용을 위한 새주소 관리 시스템 개발에 대한 것이다. 본 연구를 통하여 지방 중소도시의 새주소 관리시스템 개발과 구축은 클라이언트 서버 기반의 GIS 기능을 충분히 활용하여 관리시스템을 설계하고, 관리시스템의 데이터베이스를 객체지향 형으로 구축에 의한 WEB-GIS로 구현하여 새 주소의 안내 및 생활지리정보서비스의 다양할 기능을 추가할 수 있도록 개발하였다. 그 결과로 제천시의 새주소 관리시스템은 기존의 GIS DBMS의 접근방식을 개선하여 다양한 새 주소의 도로와 연계된 건물의 위치정보를 신속하게 이용할 수 있는 그 효용가치를 크게 높일 수 있었다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.656-658
• /
• 2012

본 논문에서는 엔진의 엔진성능, 안전성 및 내구성에 직접적인 영향을 미칠 수 있는 LP 연료필터의 유동 특성을 분석하고자 하였다. LP 연료필터를 3차원 모델링하였으며, 유동해석을 위하여 계산격자를 구성하고 유동해석을 수행하였다. 유동장을 분석하여 입구부를 거쳐 연료필터를 지나 출구부까지 유동이 원활한 것을 확인하였고, LP 연료의 유동장은 필터내에서 양호한 것으로 판단된다. 또한, 연료필터 내부의 압력강하량을 분석하였으며, 질량유량이 증가함에 따라 압력강하량이 증가하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.977-980
• /
• 2011

In this paper, explain to development of low pressure axial compressor performance test rig in KARI. Performance test rig consist of a entrance section, rotor, stator, shaft, rig housing, bearing housing and exit section. Test rig design structural optimization to rotor dynamics analysis of the simplified rotor-shaft assembly and flow analysis of entrance/exit section.