• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.26 no.1
• /
• pp.52-63
• /
• 2017

When you need to make an upper and lower full-mouth prosthesis, you should design a prosthesis by making an accurate diagnosis and planning well. In particular, in patients with occlusal plane collapsed and misplaced occlusal plane, the patient should be restored to the previous occlusal height and the correct occlusal plane should be created. In addition, appropriate materials should be used to ensure that the patient is able to chew the food well and not force it. When the implants are placed in an inappropriate position, the design of the prosthesis is determined by considering the relationship with the prosthesis and occlusion. Design should be made for the cleanliness around the implant.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.4
• /
• pp.281-287
• /
• 2022

Objectives: This study, investigated the satisfaction of patients who received the procedure using an implant guide to identify factors affecting satisfaction in dental hospitals and clinics in Jeollanam-do. Methods: From December 2021 to February 2022, questionnaires randomly were collected from 128 patients aged 20 to 90 years visiting dental hospitals and clinics using surgical guides in some areas of Jeollanam-do. Results: There was a negative correlation between the overall satisfaction average and Visual Analog Scale (VAS) pain level (r=-0.414, p<0.001), and a negative correlation between VAS pain level and VAS satisfaction (r=-0.273, p<0.05), As subjective pain decreased, subjective satisfaction increased, and as subjective pain increased, the overall satisfaction average also decreased, showing an inverse correlation. Factors affecting satisfaction with the guide for implant surgery were whether you would like to recommend it to people around you (β=0.556), whether you would like to explain the guide (β=0.194), and whether you thought it was good to receive the guide (β=0.199). Conclusions: Therefore, in order to increase the satisfaction of the implant surgical guide procedure, it is considered important to perform a sufficient explanation of the implant surgical guide before the procedure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.70-76
• /
• 2018

Excessive tooth wear can lead to decrease in occlusal vertical dimension and can cause pathological changes in the oral environment and masticatory system. When recovering occlusal vertical dimension and occlusion, accurate diagnosis and analysis are essential. This clinical case describes a 75-year-old woman with severely worn dentition due to loss of the posterior support. Full mouth rehabilitation with occlusal vertical dimension increment was planned. Clinical and radiographic examinations, occlusal vertical dimension evaluation, and diagnostic wax-up were performed and patient adaptability was evaluated using provisional restorations. As for definitive restoration, considering economic condition of the patient, removable partial denture was fabricated and solitary implants were placed in the mandibular left and right posterior region to increase support and retention of the removable partial denture. During one year of follow-up, functional and esthetic outcomes were observed satisfactory.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.167-174
• /
• 2018

Purpose: The purpose of present study was to retrospectively analyze the survival rate of implant placed after alveolar ridge preservation by initial stability and radiographic measurements. Materials and Methods: In total, 19 patients who received 21 sandblasted, large-grit, acid-etched (SLA) implants were enrolled in this retrospective study. Implants placed after alveolar ridge preservation technique (ARP) 2 - 3 months healing period, Periotest value (PTV) measured at implant placement and before placed prosthodontics. Marginal bone level (MBL) was measured at implant placement and final recall check. Results: Overall survival rate of implant was 100%. Mean PTV at implant placement was $-0.06{\pm}8.33$ and mean PTV before placed prosthodontics was $-5.75{\pm}1.7$. The range of MBL change was from -0.55 mm to 1.6 mm (Mean: $0.19{\pm}0.58mm$). Conclusion: The findings of present study suggest that the implant paced after alveolar ridge preservation appear high survival rates and stable MBL.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.234-243
• /
• 2015

Developing of digital technique, it is possible to fabricate implant prostheses for edentulous area using intraoral 3-dimentional information throughout implant diagnosis and treatment process. It is being changed that from the method using CAD/CAM, producing prostheses by model scanning after conventional impression and model processing, to the method of fabricating implant provisional restorations and customized abutments by digital impression after connecting digital impression copings (scanbody) and implant fixtures without models. But, this digital method has not been actively used for implant prostheses not yet. Specially, it is short of intraoral digital impression cases for immediate provisional restorations of the maxillary anterior implants. The gingival contour impression of maxillary anterior area is very important for esthetic restorations. Accordingly, in this case report, the using a digital impression coping (scanbody) and digital impression by CEREC Omnicam (Sirona, Bensheim, Germany) or Trios (3shape, Copenhagen, Denmark) were introduced for immediate provisional restorations in 3 cases needed a single implant restoration in maxillary anterior area. The clinical results were satisfactory on the convenience and accuracy of digital impression technique and the good esthetics of final restorations.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.373-388
• /
• 2010

Fracture causes serious problems in many instance of prosthetic failures. But it is hard to find the definite causes when fractures occur. Fractography encompasses the examination of fracture surfaces that contain features resulting from the interaction of the advancing crack with the microstructure of the material and the stress fields. All fractured specimens(implant retaining screw) retrieved from Gangneung-Wonju national university dental hospital for 3 years(from 2007 to 2009). After pretreatment of samples, the scanning electon microscope were used for surface examination and fracture analysis. In case of most of the fractured specimens, fracture took place by fatigue fracture and fractured surface represents fatigue striation. Fatigue striation indicate the progression of the crack front under cyclic loading, are characteristic of stage 2 crack growth. The site of crack initiation and stage 1 crack growth were not easily identified in any of the failure, presumably because of the complex microstructural features of the polycrystalline sample. In case of fractured by overload, dimpled or cleavage surface were observed. Using the interpretation of characteristic markings(ratchet mark, fatigue striation, dimple, cleavage et al) in fracture surfaces, failure events containing the crack origin, crack propagation, material deficiency could be understand. Using the interpretation of characteristic markings in fracture surfaces, cause and mechanism of fractures could be analyzed.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.315-321
• /
• 2010

The aim of this study was to assess change of the oral health related quality of life after fixed prosthetic treatment using implant therapy. One hundreds and twenty patients from 3 dental clinics in Seoul, Incheon and Daegu were recruited after verbal consent. The oral health related quality of life by OHIP-14, the treatment satisfaction by North Texas Periodontal Associates and the oral health interest w+ere measured before fixed prosthetic treatment using implant and one months after prosthetics. Total OHIP-14 changed significantly between pre- and post- treatment (p<0.001). Although gender(p=0.01), economic status (p=0.04) and education status (p=0.01) affect to OHIP-14 significantly before treatment, these factors didn't have effects on OHIP-14 after treatment. The subjective satisfaction in masticatory function, social function and psychological function increased significantly after treatment (p<0.001). Besides, the patients' oral health interests increased significantly after treatment (p<0.001). The fixed prosthetic treatment using implant therapy can improve the oral health related quality of life, subjective satisfaction of mastication, social function and psychological function, and oral health interest of dental patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.254-262
• /
• 2019

As implant can be covered by National Health Insurance Service (NHIS), it was increased the interest in the removable partial denture (RPD) with the surveyed fixed prosthesis supported by implant fixture. To achieve predictable result, it needs the prudent implant planning by basic principles of RPD and patient's residual ridge. This 67 years old age male had a few unilateral remaining teeth, and hoped the treatment covered by NHIS. As using CAD software, the position of implant is planned with regarding to occlusal table of provisional denture, basic principles of RPD, and resorbed residual ridge. The definitive prostheses can ensure the stability and retention of removable prosthesis. When planning implant fixed prostheses, the digital technique was utilized to consider basic principle of RPD and resorbed residual ridge. As a result, it provided satisfactory prostheses.

• Journal of dental hygiene science
• /
• v.8 no.2
• /
• pp.97-101
• /
• 2008

This study was aimed to provide basic data which are fairly useful to improve satisfaction level of patients by analyzing factors related to each functional satisfactions of dental implant treatment. The subjects of this study were 120 patients who received implant treatment and analyzed with t-test, one-way ANOVA and pearson's correlation. The results of this study were as follows. 1. Differences of each functional satisfaction according to general characteristics was not reveal statistically significant. 2. A group to got periodic scaling and tooth brushed four or more times a day showed the highest satisfaction of social and esthetic function(p < .05). 3. A group to implantation in premolar area showed the highest satisfaction of masticatory function and a group to implantation in incisor to be high in satisfaction of social and esthetic function, but the differences were not statistically significant 4. A group to got implant treatment at a dental hospital showed the highest satisfaction of both social and esthetic function, and at a general hospital were found lowest(p < .05). 5. Masticatory function, social function, esthetic function, and overall satisfaction were found to be in a positive correlations, and especially, the correlation coefficient between the overall satisfaction and social function was found to be highest(p < .01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.404-411
• /
• 2012

Tooth impaction is defined as a failure of tooth eruption resulting from the physical obstacles in the eruption path or the abnormal position of the tooth germ. Impaction of mandibular second molar is relatively rare, and it may incite pathologic conditions such as dental caries, periodontitis, or root resorption of adjacent first molar. Thus, early diagnosis and treatment is recommended. In the first case, a 10-year-old male patient, was treated by brass wire to separate the bilaterally impacted mandibular second molars. In the second case, a 12-year-old female patient, was treated with Humphrey appliance for impacted mandibular left second molar, which was detected during a periodical dental examination. In the third case, a 17-year-old female patient with impacted mandibular right second molar, was treated by uprighting spring with mini-implant anchorage around premolar area. In the last case, an 18-year-old male patient, was treated with mini-implant placed on the ramus of mandible connected to the orthodontic buttons bonded on impacted mandibular left second molar by elastic thread.