• Journal of Haehwa Medicine
• /
• v.4 no.2
• /
• pp.255-272
• /
• 1996

소적백출산(消積白朮散)은 ${\ll}$화제국방(和劑局方)${\gg}$에 삼령백출산(蔘笭白朮散)에 정열해독약(淸熱解毒藥)인 와송(瓦松) 금은화(金銀花) 포공영(蒲公英)을 가미(加味)한 처방(處方)으로, 본방(本方)인 삼령백출산(蔘笭白朮散)은 비위허약(脾胃虛弱), 음식부진(飮食不振), 다곤소력(多困少力) 중만비대(中滿痺臺), 심정기천(心柾氣喘), 구토(嘔吐), 설사(泄瀉), 상한해수(傷寒咳嗽)를 치료목적(治療目的)으로 쓰여 온 이래(以來) 임상에서는 대편부실(大便不實), 구설(久泄), 옹달궤후(癰疸潰後) 불사식자(不思食者)를 치료(治療)하는데 다용(多用)되어 왔다. 종양(腫瘍)(Neoplasia)은 새로운 성장(成長)(New+ Glowth) 이라는 세포학적(細胞學的)으로 비정상세포(非正常細胞)의 과다증식(過多增殖)으로 인해 실질장기(實質臟器), 유강장기(有腔腸器), 및 골격(骨格), 피부조직(皮膚組織)에 비정상조직(非正常組織)을 형성(形成)하는 질환(疾患)이다. 현대적(現代的) 종양(腫瘍)과 유사(類似)한 한의학적(韓醫學的)인 병증(病症)은 ${\ll}$소문(素問)${\gg}$에서는 "궐산(厥疝), 복량(伏梁), 식적(息積)"으로 ${\ll}$영추(靈樞)${\gg}$에서는 "장담(腸覃), 석가"로 표시(表示)된 이후(以後)로 소원방(巢元方)은 징가, 식일, 석옹(石癰), 완저(緩疽), 석저(石疽) 등으로 표현(表現)하였다. 원인(原因)에 대(對)해서는 ${\ll}$내경(內經)${\gg}$에서는 허(虛)와 한기(寒氣), 한(寒) 열(熱)로 보았고, 그 외(外)의 학자(學者)들은 내허(內虛)와 기혈불순(氣血不順), 화(火), 한(寒), 기울(氣鬱), 음양불화(陰陽不和)등으로 보았다. 치료(治療)는 ${\ll}$내경(內經) 자법론(刺法論)${\gg}$에서 "정기재내(正氣在內) 사불가우(邪不可于)" 이라 하여 생명활동(生命活動)의 원동력(原動力)인 정기(正氣)의 역할(役割)을 강조(强調)하였고, ${\ll}$육원정기대론(六元正氣大論)${\gg}$에서는 "대적대취(大積大聚) 불가범야(不可犯也) 쇠기태반이지(衰其太半而止)"라 하여 공벌약(攻伐藥)을 과용(過用)하여 정기(正氣)를 손상(損傷)시켜서는 안된다고 하는 등 부정위주(扶正爲主), 거사위주(祛邪爲主) 혹은 부정거사(扶正祛邪) 겸용(兼用)의 방법(方法)이 혼용(混用)되고 있다. 현대(現代) 서양의학(西洋醫學)의 항암제(抗癌劑)는 치료효과(治療效果)는 우수(優秀)하지만 악심(惡心), 구토(嘔吐)를 비롯하여 골수억제효과(骨髓抑制效果)와 간(肝), 심(心), 신(腎), 폐(肺)의 손상(損傷)을 초래(招來)하는 등(等)의 부작용(副作用)을 나타내며, 빈번(頻繁)한 화학요법제(化學療法劑)의 투여(投與)로 인(因)한 암세포(癌細胞)의 약제저항성(藥劑抵抗性) 출현(出現)등이 항암제(抗癌劑)의 문제점(問題點)으로 제시(提示)되고 있다. 이에 저자(著者)는 비위기능(脾胃機能)을 강화(强化)시켜 정기형성(正氣形成)에 깊이 관여(關與)하는 삼령백출산(蔘笭白朮散)에 청열해독(淸熱解毒), 소종산결지제(消腫散結之劑)인 금은화(金銀花), 포공영(浦公英), 와송(瓦松)을 가미(加味)하여 암발생(癌發生) 백서(白鼠)에 투약(投藥)한 후(後) sarcoma 180암세포(癌細胞)에 대(對)한 생명연장효과(生命延長效果)와 항암제(劑)의 일종(一種)인 cis-platin을 이용(利用)하여 양방항암제(洋方抗癌劑)의 부작용(副作用)에 대(對)한 본(本) 방(方)의 효과(效果)를 실험(實驗)하여 관찰(觀察)하였던 바 다음과 같은 결론(結論)을 얻었다. 1. 소적백출산(消積白朮散)은 sarcoma 180 암세포(癌細胞) 이식종양(移植腫瘍)에 대(對)해 생명연장효과(生命延長效果)가 인정(認定)되었다. 2. 소적백출산(消積白朮散)은 치암제(治癌劑)인 cis-platin 치사독성(致死毒性)에 대(對)해 생존연장효과(生存延長效果)가 인정(認定)되었다. 3. 소적백출산(消積白朮散)은 cis-platin 현독성(腎毒性) 생쥐 및 흰쥐에 있어서 유의성(有意性) 있는 체중감소억제효과(體重減少抑制效果) 및 serum BUN 상승억제효과(上昇抑制效果)가 인정(認定)되었다. 4. 소적백출산(消積白朮散)은 cis-platin 현독성(賢毒性) 흰쥐에 대(對)해 유의성(有意性) 있는 serum creatinine 상승억제효과(上昇抑制效果)가 나타났으며, cis-platin의 혈액학적(血液學的) 부작용(副作用)인 RBC, WBC 감소(減少)에 대(對)해 감소억제효과(減少抑制效果)가 인정(認定)되었다. 5. 소적백출산(消積白朮散)은 cis-platin 현독성(腎毒性) 흰쥐에 대(對)해 뇨량감소억제(尿量減少抑制) 효과(效果) 및 ureanitrogen과 creatinine 배수감소억제효과가 관찰(觀察)되었다. 이상(以上)의 결과(結果)로부터 소적백출산(消積白朮散)은 악성종양치료(惡性腫瘍治療) 및 항암제(劑)의 부작용(副作用)을 경감(輕減)시키는 데 응용(應用)할 수 있을 것으로 사료(思料)된다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.180-188
• /
• 2014

It is very important accurate diagnosis and quick treatment in cerebrovascular disease, i.e. stenosis or occlusion that could be caused by risk factors such as poor dietary habits, insufficient exercise, and obesity. Time-of-flight magnetic resonance angiography (TOF-MRA), it is well known as diagnostic method without using contrast agent for cerebrovascular disease, is the most representative and reliable technique. Nevertheless, it still has measurement errors (also known as overestimation) for length of stenosis and area of occlusion in celebral infarction that is built by accumulation and rupture of plaques generated by hemodynamic turbulence. The purpose of this study is to show clinical trial feasibility for 3D-SPACE T2, which is improved by using signal attenuation effects of fluid velocity, in diagnosis of cerebrovascular disease. To model angiostenosis, strictures of different proportions (40%, 50%, 60%, and 70%) and virtual blood stream (normal saline) of different velocities (0.19 ml/sec, 1.5 ml/sec, 2.1 ml/sec, and 2.6 ml/sec) by using dialysis were made. Cross-examinations were performed for 3D-SPACE T2 and TOF-MRA (16 times each). The accuracy of measurement for length of stenosis was compared in all experimental conditions. 3D-SPACE 2T has superiority in terms of accuracy for measurements of the length of stenosis, compared with TOF-MRA. Also, it is robust in fast blood stream and large stenosis than TOF-MRA. 3D-SPACE 2T will be promising technique to increase diagnosis accuracy in narrow complex lesions as like two cerebral small vessels with stenosis, created by hemodynamic turbulence.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.63-70
• /
• 1992

The aim of this research is to obtain a basic quantitative understanding of the effect of a noncondensable gas on the absorption of water vapor by a $H_2O$ / LiBr combination with n-octanol as the surfactant. Nonflowing aqueous solutions of LiBr (40,45,50 mass％) were exposed to saturated water vapor following the addition of an n-octanol sufactant (0.01 and 0.6 mass％). A small amount of a noncondensable gas (air) was allowed into the absorber (0.03 volume％) and its effect was analyzed by measuring the amount of water vapor absorbed. This study will aid to predict the performance of heat pump and safety operating condition when the noncondensable gas is not allowed in the absorber The results indicate that, in the presence of small amounts of a noncondensable gas, vapor absorption enhancement ratios are less than half o( those obtained under the same experimental conditions when a noncondensable gas is not present (1). The presence of a noncondensable gas causes the partial vapor pressure of air to increase at the vapor / liquid interface, which results in an instability of vapor absorption rate nd. hence, in an inhibition of interfacial disturbance.

• Journal of Oral Medicine and Pain
• /
• v.36 no.3
• /
• pp.187-197
• /
• 2011

Temporomandibular disorders(TMD) is a collective term which is embracing a number of clinical problems that involve the masticatory musculature, the TMJ and associated structures, or both. Myofascial pain, which is a kind of masticatory muscle disorder of TMD, is the sensory, motor, and autonomic symptoms caused by myofascial trigger points. There has been some controversies regarding etiologies of TMD and MFP. Especially the issue of occlusal conditions has been a critical issue for long time. Despite much efforts, the results of studies regarding occlusal conditions were contradictory. These controversies might be mostly due to various factors resulting from the complex nature of TMD, however, inaccurate and inappropriate study design, selection criteria, methodologies also play significant roles. Recently, a computerized occlusal analysis system, T-Scan II which made it possible to reveal quantifiable time data and relative force data for analyzing occlusion, was introduced. Some authorities suggested that the concept of disclusion time and prolonged disclusion time of posterior tooth and MFP are related using T-Scan II. But the previous studies which used T-SCAN II are not reliable for they did not provide accurate diagnostic criteria of MFP. Morever they did not compare with controls, and had many other problems. The purpose of this study was to evaluate the relationship between MFP and prolonged disclusion time of posterior tooth, which is one of the occlusal factors of TMD, by selecting 30 subjects as the study group through strict criteria and comparing them with 38 controls using T-SCAN II, computerized occlusal analysis system. The results, statistically analyzed, are summarized as follows: 1. Cronbach ${\alpha}$ coefficient of repeated measurements of disclusion time was 0.92. 2. There were no statistically significant differences at repeated measured disclusion time of both side between control and study group. 3. There was no statistically significant diffefence in the disclusion time between right and left side. From the results above, we can suggest that there was no relationship between MFP and disclusion time, so irreversible treatments leading to the reduction of disclusion time for treating MFP would not be appropriate. However more controlled, large scaled study, which consider various occlusal factors, and quantification of symptoms using Helkimo index would be necessary in the future.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.6
• /
• pp.1366-1381
• /
• 1997

Background : Uvulopalatopharyngoplasty(UPPP) has become the most common surgical treatment for obstructive sleep apnea syndrome(OSAS). However, the results of this therapeutic modality have been quite variable with successful results by several authors and poor results by others. Until recently, in Korea, there is only a few reports about the clinical efficacy of UPPP. A prospective study was undertaken to evaluate the effectiveness and complications of UPPP. Method : Twenty-six OSAS patients who had undergone UPPP with preoperative and postoperative polysomnographic studies were included in this study. Two definitions of surgical success were used. The responder was defined, using a conventional criteria, as a 50% or more reduction in apnea index(AI) or apneahypopnea index(AHI) after UPPP, or a postoperative AI of <10 or AHI of <20. The initial cure was defined, using our own criteria, as a postoperative AI of <5 or AHI of <10. Complications were categorized in two groups : early(disorders during the first 10 postoperative days) and late. Results : Eighteen patients(69.2%) were responders, and ten patients(38.5%) were considered as initial cure. On the other hand, in five patients (19.2%), postoperative polysomnographic data demonstrated deterioration compared with preoperative data. Reduction rate of AI or AHI following UPPP was not significantly related to the preoperative body mass index, AI or AHI. There was no significant change of sleep architecture before and after UPPP in responder and initial cure groups. Early complications such as pain, dyspnea, bleeding, nasal reflux, dysphagia or wound disruption were observed in all patients. Late complications such as nasal reflux, voice change, dysphagia, loss of taste, pharyngeal dryness or foreign body sensation were discovered in 22 patients (84.6%). However, all early and late complications were of minor importance. Conclusion : The response to UPPP was favorable in approximately 70% of OSAS patient. However, the initial Cure rate of UPPP was relatively low. We suggest that selection of more appropriate surgical candidates and adequate surgical protocol is necessary to obtain a more successful result with UPPP.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.125-135
• /
• 2009

Statement of problem: Loosening or fracture of the abutment screw is one of the common problems related to the dental implant. Generally, in order to make the screw joint stable, the preload generated by tightening torque needs to be increased within the elastic limit of the screw. However, additional tensile forces can produce the plastic deformation of abutment screw when functional loads are superimposed on preload stresses, and they can elicit loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum tightening torque that maximizes a fatigue life and simultaneously offer a reasonable degree of protection against loosening. Purpose: The purpose of this study was to present the influence of tightening torque on the implant-abutment screw joint stability with the 3 dimensional finite element analysis. Material and methods: In this study, the finite element model of the implant system with external butt joint connection was designed and verified by comparison with additional theoretical and experimental results. Four different amount of tightening torques(10, 20, 30 and 40 Ncm) and the external loading(250 N, $30^{\circ}$) were applied to the model, and the equivalent stress distributions and the gap distances were calculated according to each tightening torque and the result was analyzed. Results: Within the limitation of this study, the following results were drawn; 1) There was the proportional relation between the tightening torque and the preload. 2) In case of applying only the tightening torque, the maximum stress was found at the screw neck. 3) The maximum stress was also shown at the screw neck under the external loading condition. However in case of applying 10 Ncm tightening torque, it was found at the undersurface of the screw head. 4) The joint opening was observed under the external loading in case of applying 10 Ncm and 20 Ncm of tightening torque. 5) When the tightening torque was applied at 40 Ncm, under the external loading the maximum stress exceeded the allowable stress value of the titanium alloy. Conclusion: Implant abutment screw must have a proper tightening torque that will be able to maintain joint stability of fixture and abutment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.2
• /
• pp.137-147
• /
• 2008

Statement of problem: Dental implant procedure has been recognized as a very effective treatment to rehabilitate fully or partially edentulous patients. However, mechanical failures such as screw loosening, screw fracture have been still reported frequently. Purpose: The purpose of this study was to evaluate the influence of tungsten carbide/carbon coating, which has superior hardness and frictional wear resistance, on implant-abutment screw loosening of three different joint connections after one million cyclic loading. Material and methods: The values of detorque before and after loading were measured in three different joint connections (Osstem Implant, Korea), one external butt joint, US II implant system and two internal cones, SS II and GS II system. The values of detorque before loading was analyzed by one-way ANOVA, and two-way ANOVA and Scheffe' test were performed for the value of detorque after loading. Results: 1. The values of initial detorque of tungsten carbide/carbon coated Ti alloy screw were smaller those of Ti alloy screw (P<.01), and there were no differences among implant systems in each screw (P>.05). 2. In comparison of loss rate of detorque value after cyclic loading, US II system was greater than SS II and GS II system but there was no difference between SS II and GS II system (P<.01). 3. Loss rates of detorque value after cyclic loading decreased consistently at tungsten carbide/carbon coated Ti alloy screw comparing with Ti alloy screw in all implant systems (P<.01), and there were no differences among three systems in reduction of loss rates by using tungsten carbide/carbon coated Ti alloy screw (P>.05). Conclusion: Tungsten carbide/carbon coating to increase preload with reduction of friction resistance was a effective way to decrease screw loosening by functional loading.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.587-597
• /
• 2004

Over the past 20 years, great strides have been made in research regarding the mechanisms involved in the progression of carious lesions, but new equipment and research tools need to be developed to continue these advancements in caries research. Various methods have been applied to reduce the incidence of carious lesions, which have led to a significant decrease in the number of occlusal caries, but a concurrent increase in the proportion of proximal carious lesions. New diagnostic equipment has been developed to detect early stage carious lesions, and these have demonstrated excellent laboratory results and show promise in clinical applications. The research presented here examines the efficacy of the newly developed $DIFOTI^{TM}$ system in detecting proximal carious lesions compared to traditional intraoral exam and bitewing radiography, possible problems or deficiencies of using the system in clinic, possible improvements that can be made to the system, and the efficacy of detecting early, reversible carious lesions that can be remineralized by preventative fluoride applications. The subject pool consisted of 23 grammer school age patients just prior to entering the mixed dentition phase. Each patient was given a thorough oral examination, radiographic examination consisting of bitewing radiographs of the posterior teeth, and $DIFOTI^{TM}$ examination of the anterior and posterior teeth. Each examination was carried out two times by two examiners, and the data were statistically analyzed. The results are as follows: 1. The mean alpha value of reliability test of the visual oral examination was as follows; occlusal surface was 0.8470. mesial surface was 0.6430, distal surface was 0.5727. lingual surface was 0.2807 and distal surface was 0.2339. When the examination was limited to posterior teeth, the mean alpha value was as follows; occlusal surface was 0.8577, distal surface was 0.8211, lingual surface was 0.7728, buccal surface was 0.7152 and mesial surface was 0.6782. 2. The alpha value of reliability test of the radiographic analysis of carious lesions of the occlusal, mesial, and distal surfaces was 0.8500. 3. The alpha value of reliability test of the $DIFOTI^{TM}$ diagnostic analysis of carious lesions of the occlusal, buccal, lingual, mesial, and distal surfaces was determined to be 0.7917. 4. The $DIFOTI^{TM}$ diagnostic system was found to be the most accurate means of detecting occlusal, buccal, and lingual surface carious lesions (p<0.05), while mesial and distal proximal carious lesions were most accurately assessed using bitewing radiography (p<0.05).

• Radiation Oncology Journal
• /
• v.22 no.4
• /
• pp.316-324
• /
• 2004

Purpose : In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration sating techniques that can adjust patients' beds by using reversed values of the data obtained. Materials and Methods : The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range $3\~3$ m), host computer (RS232C) and stepping motor (torque 2.3 Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place In order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data (three dimensional data form with distance of 2 cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. Results : The result of analyzing the acquisition-correction delay time the three types of data values and about each value separately shows that the data values coincided with one another within $1\%$ and that the acquisition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. Conclusion : This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultrasonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.781-788
• /
• 2021

Due to the high sensitivity to radiation, excessive exposure needs to be prevented by accurately measuring the dose irradiated to the skin during radiation therapy. Although clinical trials use dosimeters such as film, OSLD, TLD, glass dosimeter, etc. to measure skin dose, these dosimeters have difficulty in accurate dosimetry on skin curves. In this study, to solve these problems, we developed a skin dosimeter that can be attached according to human flexion and evaluated its response characteristics. For the manufacture of the dosimeter, lead oxide (PbO) with high atomic number (Z_Pb: 82, Z_O: 8) and density (9.53 g/cm³) and silicon binders that can bend according to human flexion were used. In the case of a dosimeter made of PbO material, the performance degradation has been prevented by using parylene and others due to the presence of degradation due to oxidation, but the previously used parylene is affected by bending, so a new form of passive layer was produced and applied to the skin dosimeter. The characteristic evaluation of the skin dosimeter was evaluated by analyzing SEM, reproducibility, and linearity. Through SEM analysis, bending was evaluated, reproducibility and linearity at 6 MeV energy were evaluated, and applicability was assessed with a skin dosimeter. As a result of observing the dosimeter surface through SEM analysis, the parylene passive layer PbO dosimeter with the positive layer raised to the parylene produced cracks on the surface when bent. On the other hand, no crack was observed in the silicon passive layer PbO dosimeter, which was raised to silicon passive layer. In the reproducibility measurement results, the RSD of the silicon passive layer PbO dosimeter was 1.47% which satisfied the evaluation criteria RSD 1.5% and the linearity evaluation results showed the R² value of 0.9990, which satisfied the evaluation criteria R² 9990. The silicon passive layer PbO dosimeter was evaluated to be applicable to skin dosimeters by demonstrating high signal stability, precision, and accuracy in reproducibility and linearity, without cracking due to bending.