• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.357-364
• /
• 2008

This paper deals with the free vibrations of arches with rectangular hollow section having constant area. The differential equations governing free vibrations of arches are derived in polar coordinates, in which the effect of rotatory inertia is included. Natural frequencies is computed numerically for parabolic arches with clamped-clamped, clamped-hinged and hinged-hinged ends. Comparisons of natural frequencies between this study and reference are made to validate theories and numerical methods developed herein. The lowest four natural frequency parameters are reported, with the rotatory inertia, as functions of three non-dimensional system parameters: the breadth ratio, the thickness ratio and the shape ratio

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.1
• /
• pp.78-87
• /
• 1998

In many industrial practices it is an important problem to discharge a high-pressure exhaust gas to the atmosphere without generating a loud noise and much vibration. This may be achieved by confining a shock system inside the exhaust duct with a double orifice. The objective of the current work is to develop a new treatment method for the high-pressure exhaust gases. A theoretical analysis was applied to one-dimensional, steady. viscous, compressible model flowfield, and an experiment was performed using a shock tunnel facility. The results showed that the total pressure drop increases with a decrease of the opening area of the upstream orifice, and the shock confinement to the duct is possible by decreasing the opening area of the downstream orifice.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.215-222
• /
• 1996

원전 격납구조물의 구조해석에 대한 대부분의 연구에서 격납구조물을 축대칭으로 모델하고 있다. 따라서 격납구조물에 배근된 강재도 축대칭으로 가정하는 것이 일반 적이며, 유한요소모델 구성시 강재는 2절점 트러스나 1절점 링 트러스요소에 의해서 모델한다. 이때 유효철근비는 트러스요소의 단면적에 의해서 표현되며, 원통형 벽체에서는 높이에 따라 배근된 강재량이 일정하므로 실제와 근접한 모델이 가능하다. 그러나, 상부돔의 축대칭모델시 돔의 자오선 방향으로 규정된 강재량이 일정치 않고, 변화하게 된다. 기존에 연구에서는 이러한 강재량의 변화를 고려하지 못하고 반경방향으로 일정한 것으로 가정하여 구조해석을 수행하여 왔다. 이와같은 모델상의 제약으로 인해서 철근이나 텐던의 조기항복, 돔 정상부 부근에서의 부 정확한 변형특성을 보이고 있다. 본 연구에서는 실제 규정된 강재량을 유한요소모델에 반영하기 위해 정점부에서 자오선 방향으로 변화되는 강재량을 모델할 수 있는 기법에 대해서 연구하였으며, 연구결과를 바탕으로 격납구조물의 극한 내압해석을 수행하여 기존 모델방법에 의한 해석결과와 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1261-1265
• /
• 2006

본 연구에서는 수질정화체 설치에 따른 농업용 배수로의 수리적 안정성 검토를 위하여 수리모형시험을 실시하였으며, 수질정화체의 단면적 및 위치를 변화시켜 수리적 안정성을 검토하였다. 유량이 일정한 상태에서 수질정화체의 단면적을 변화시켜 수심 및 유속을 측정하여 수질정화체의 단면적에 대한 농업용 배수로의 수리적 안정성을 알아보았으며, 단면적을 고정시킨 상태에서 수질정화체의 위치변화에 따른 수심 및 유속을 측정함으로써 수질정화체 간의 간격에 의한 배수로의 수리적 안정성을 고찰하였다. 수심과 유속은 수질정화체를 기준으로 상류 및 하류에 대하여 측정함으로서 수질정화체 전 후의 변화상태를 알아보았다. 수질정화체의 단면적이 증가함에 따라 상류 수심이 하류 수심에 비하여 증가하며, 유속변화가 심한 것을 확인하였다. 또한 수질정화체의 간격이 가까워짐에 따른 유속 및 수심 변화를 알아보았다. 본 연구에서 나온 수리적 변화는 수로내의 장애물에 대한 기존 공식 중에 D'Aubuission식과 유사한 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1A
• /
• pp.1-7
• /
• 2011

This paper deals with buckling loads of the column with the constant surface area. The shape function of variable column depth is chosen as the linear taper. The ordinary differential equation governing buckled shapes of the column is derived based on the dynamic equilibrium equation of such column subjected to an axial load. Three kinds of end constraint of hinged-hinged, hinged-clamped and clamped-clamped are considered in numerical examples. Effects of the column parameters on buckling loads are extensively discussed. Especially, section ratios of the strongest column are calculated, under which the maximum, i.e. strongest, buckling loads are achieved. Also the buckled shapes are obtained for searching the nodal points where the inner transverse supports are simply installed to increase the buckling loads.

• 연구논문집
• /
• s.29
• /
• pp.123-130
• /
• 1999

Flow divider valve, a kind of hydraulic control valve to divide the flow from one input line to two output line uniformly, should be able to keep the constant flow to output lines despite of the change load or supply pressure. Having 5-10% flow diving error in commercial hydraulic products is one of main source of the accumulated error caused hydraulic system problem and demands the development of flow divider valve to control flow more accurately, In this paper, the dynamic characteristics of flow divider valve are investigated by the numerical estimation of the spool motion considered the external supply force. The optimum design of flow divider valve are proposed to reduce the flow diving error. For the dynamic characteristics analysis, the change of sectional area of fixed and variable orifice, and spool are studied when the input signal is accepted to a constant load.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.10 no.1
• /
• pp.33-44
• /
• 1973

Chine형 선체단면 주상체의 자유표면에서의 상하운동에 수반되는 부가질량과 감쇠력을 Ursell-Tasai 방법에 의하여 계산하였다. Chine형에서 구하여진 결과는 같은 선체단면적 계수와 반폭흘수비를 갖는 등가 Lewis형의 결과와 비교하였고 선체단면의 형상이 부가질량 및 감쇠력에 미치는 영향을 고찰하였다. Chine형과 등가 Lewis형 선체단면 주상체에 파고가 일정한 횡파가 입사할 때의 상하운동을 고찰하였다. 이상과 같은 계산 및 고찰을 통하여 다음 결과를 얻었다. 1) 자유표면이 부가질량에 미치는 영향은 chine형이 등가 Lewis형단면보다 큰 값을 갖는다. 2) 선체단면적계수와 반폭흘수비가 같은 경우에 감쇠력의 크기는 Lewis form, single chine, double chine순서이다. 3) 선체단면계수와 반폭흘수비는 상하운동에 가장 큰 영향을 미치는 것으로 생각되며, 선체단면의 기하학적인 변형이 운동에 미치는 영향은 중요한 요소가 되질 못한다. 4) 감쇠력계수와 선체단면계수와의 관계는 간단한 관계를 유지한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.3
• /
• pp.239-245
• /
• 2010

The present study is about an efficient extraction of tunnel cross sections from huge point cloud achieved by a terrestrial laser scanner. A method, using a hash-based data structure, is introduced, by which point clouds, potentially composing cross sections, are extracted along a tunnel center line. The center line is estimated by linking points which are drawn in the middle of pseudo cross sections based on the hash-based data structure. Point clouds of a same thickness are extracted at a same interval along the center line. In result, it took less than 3 seconds and 124 MB of memory to extract, out of the 7.5 million points, the point clouds of 1 m interval and 0.1 m thickness. A manual operation, however, was needed to fix the outliers on the center line and to select both start and end points on it.

• Journal of the Korea Concrete Institute
• /
• v.15 no.5
• /
• pp.643-649
• /
• 2003

The purpose of this study were evaluated to flexural and bond performance by sectional area and geometry change through bond and flexural test of a structural synthetic fiber. Six deformed structural synthetic fibers were investigated and pullout and flexural test was conducted. Included parameters is three different geometries of fiber and two of fiber sectional area. The test result shows that the cycles and amplitude of structural synthetic fiber increased, pullout load and pullout fracture energy decreased and flexural strength increased, if sectional area is same. The sectional area increased, pullout load and pullout fracture energy increased and flexural strength decreased, if cycles and amplitude of structural synthetic fiber is same. Based on test results, structural performance of the concrete could know that is influence by pullout performance of fiber as well as various factor (fiber number, material properties etc).

• Computational Structural Engineering
• /
• v.2 no.1
• /
• pp.79-86
• /
• 1989

This paper concentrates on the development of simplified and effective algorithm for optimum reinforced concrete(RC) member design. After constructing the data base of predetermined RC sections which are arranged in the order of increasing resistant capacity, the relationship between the section identification numbers and resistant capacities of sections is estabilished by regression and it can be used to obtain the initial solution(section) which satisfies the design constraints imposed. Assuming that there exists the optimum solution. The optimization of the entire structure is accomplished through the individual mumber optimization.