• Magazine of the Korea Concrete Institute
• /
• v.9 no.5
• /
• pp.157-164
• /
• 1997

일반적으로 콘크리트와 철근간의 경계면을 나타내는 유한요소법에는 균열의 부근에서 발생하는 부착열화 현상을 고려하지 않고 있다. 이것은 균열 부근에서 과도한 부착을 초래하고 , 국소 변형과 균열의 진전에도 영향을 준다. 본 연구에서는 철근콘크리트 구조물의 균열부근에서 일어나는 부착거동의 변화를 고려한 비선형 부착응력-미끄럼 모델을 제안하였다. 철근과 콘크리트간의 경계면에는 링크요소를 이용하였고, 링크의 특성은 철근을 가로지르는 균열의 상태에 따라 변하도록 조정하였다. 균열의 형성상태를 정량화하고, 부착거동을 두 포락선 1) 균열로부터 충분히 떨어진 위치에서의 부착상태를 모델링한 외연포락선, 2)횡균열면에 있어서의 부착상태를 모델링한 내연포락선의 사이에 변이시키기 위하여 비국소적 손상도 개념을 도입하였다. 이 방법의 유효성을 알아보기 위하여 편재하중을 받는 T형 교각의 실험 및 해석결과를 제시하였다. 제안된 모델의 결과를 실험결과와 비교하여 본 모델의 유용성을 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.41-46
• /
• 2006

The capability for reconstructing impact forces of an aircraft wing using impact response functions and regularization methods were examined. The impact response function which expresses the relation between the structure response and the impact force was derived using the information on mass and stiffness data of a finite element model for the wing. Iterative Tikhonov regularization method and generalized singular value decomposition method were used to inverse the impact response function that was generally ill-posed. For the numerical verification, a fighter aircraft wing was used. Strain and deflection histories obtained from finite element analysis were compared with the results calculated using impact response functions. And the impact forces were reconstructed with the strain histories obtained from finite element analysis. The numerical verification results showed that this method can be used to monitor impact forces on aircraft structures.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.289-300
• /
• 2015

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In conventional approaches to predicting rail noise, the rail is regarded as placed in a free space so that the reflection from the ground is not included. However, in order to predict rail noise close to the rail, the effect of the ground should be contained in the analysis. In this study the rail noise reflected from the ground is investigated using the wavenumber domain finite element and boundary element methods. First, two rail models, one using rail attached to the rigid ground and one using rail located above rigid ground, are considered and examined to determine the rigid ground effect in terms of the radiation efficiency. From this analysis, it was found that the two models give considerably different results, so that the distance between the rail and the ground is an important factor. Second, an impedance condition was set for the ground and the effect of the ground impedance on the rail noise was evaluated for the two rail models.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.147-158
• /
• 2004

For stiffened plates composed of composite materials, many researchers have used a finite element method which connected isoparametric plate elements and beam elements. However, the finite element method is difficult to reflect local behavior of stiffener because beam elements are transferred stiffness for nodal point of plate elements, especially the application is limited in case of laminated composite structures. In this paper, for analysis of laminated composite stiffened plates, 3D shell elements for stiffener and plate are employed. Reissner-Mindlin's first order shear deformation theory is considered in this study. But when thickness will be thin, isoparamatric plate bending element based on the theory of Reissner-Mindlin is generated by transverse shear locking. To eliminate the shear locking and virtual zero energy mode, the substitute shear strain field is used. A deflection distribution is investigated for simple supported rectangular and skew stiffened laminated composite plates with arbitrary orientation stiffener as not only variation of slenderness and aspect ratio of the plate but also variation of skew angle of skew stiffened plates.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.784_785
• /
• 2009

본 논문에서는 2[MVA]급 배전용 몰드변압기의 온도분포를 유한요소해석을 통하여 수행하였다. 몰드변압기의 온도상승한도와 허용최고온도를 전자기적 열원에 대한 분석을 통하여 계산하고 그 계산된 열원을 바탕으로 열적 해석의 열원으로 사용하여 계산하였다. 일반적으로 변압기의 수명은 내부의 전반적인 열적 특성보다는 특정 부위의 온도 분포에 의해 결정되며, 특히 변압기 내부 최고점의 온도(hot spot temperature)값이 허용치 이상으로 상승할 경우 절연내력의 저하로 인해 변압기의 수명은 급격히 감소한다. 이러한 수명개선을 위해 몰드 변압기의 철심과 고압.저압권선의 Joule's loss을 계산하여 열원을 계산하였고, 그 결과를 토대로 배전용 몰드변압기의 철심과 고압 저압권선의 온도상승 분포와 최고점의 온도분포를 예측하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.537-549
• /
• 2001

The effect of partially restrained(PR) connections and the uncertainties in them on the reliability of steel frames subjected to seismic loading is addressed. A stochastic finite element method(SFEM) is proposed combining the concepts of the response surface method(RSM), the finite element method(FEM), the first-order reliability method (FORM), and the iterative linear interpolation scheme. The behavior of PR connections is captured using moment-relative rotation curves, and is represented by the four-parameter Richard model. For seismic excitation, the loading, unloading, and reloading behavior at PR connections is modeled using moment-relative rotation curves and the Masing rule. The seismic loading is applied in the time domain for realistic representation. The reliability of steel frames in the presence of PR connections is calculated considering all major sources of nonlinearity. The algorithm is clarified with the help of an example.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.70-72
• /
• 1999

일반적으로 비선형 정자계 문제를 해석하기 위해서 뉴튼-�N슨(Newton -Raphson : NR)법이 이용된다. 하지만 뉴튼-�N슨법의 경우 각 반복계산 때마다 새로운 선형 시스템의 해를 구하기 위해서 LU-decomposition과 같은 과정을 매 반복계산 때마다 시행해야 하므로 절점(node)의 수가 증가할 경우 계산시간이 증가한다는 단점이 있다. 이러한 단점을 보완하기 위해서 최근 TLM (Transmission Line Modeling)법이 새로운 반복계산법으로 비선형 유한 요소 해석에 적용되었으며 뉴튼-�N슨법에 비해 훨씬 우수한 특성을 보여주었다. 하지만 지금까지의 TLM법은 2차원의 정식화만 이루어졌고 3차원에는 적용되지 못한 것이 사실이다. 본 논문에서는 3차원의 비선형 정자계 문제에 TLM법을 적용할 수 있는 수식을 최초로 제안하며 3차원 코어(core)모델에 대해 TLM법을 적용하여 그 타당성을 검증하기로 한다. 또한 3차원 비선형 TLM법을 이용한 해석 결과가 뉴튼-�N슨법에 의한 결과와 완전히 일치하며 수렴 속도에 있어서도 훨씬 향상된 결과를 나타냄을 보이도록 하겠다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.3
• /
• pp.25-34
• /
• 1993

The long-term behavior, such as in excavation problems of weak medium, can be dealt with by the elasto-viscoplasticity models. In this paper, a combined formulation of elasto-viscoplasticity using boundary elements and finite elements without using internal cells is presented. The domain integral introduced due to the viscoplastic stresses is transformed into a boundary integral applying direct integration in cylindrical coordinates. The results of the developed boundary element analysis are compared with those from the explicit solution and from the finite element analysis. It is observed that the boundary element analysis without internal cells results in some error because of its deficiency in handling the nonlinearity in local stress concentration. Therefore, a coupled analysis of boundary elements and finite elements, in which finite elements are used in the area of stress concentration, is developed. The coupled method is applied to a time dependent inelastic problem with semi-infinite boundaries. It results in reasonable solution compared with other methods where relatively higher degree of freedoms are employed. Thus, it is concluded that the combined analysis may be used for such problems in the effective manner.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.193-201
• /
• 2008

Using Network Coding in P2P systems yields great benefits, e.g., reduced download delay. The core notion of Network Coding is to allow encoding and decoding at intermediate nodes, which are prohibited in the traditional networking. However, improper implementation of Network Coding may reduce the overall performance of P2P systems. Network Coding cannot work with general arithmetic operations, since its arithmetic is over a Finite Field and the use of an efficient Finite Field arithmetic algorithm is the key to the performance of Network Coding. Also there are other important performance parameters in Network Coding such as Field size. In this paper we study how those factors influence the performance of Network Coding based systems. A set of experiments shows that overall performance of Network Coding can vary 2-5 times by those factors and we argue that when developing a network system using Network Coding those performance parameters must be carefully chosen.

• Land and Housing Review
• /
• v.4 no.3
• /
• pp.271-277
• /
• 2013

The BNWF (Beam on Nonlinear Winkler Foundation) model is one of the simplest idealizations for a pile embedded in soil as it ignores the continuity of the soil. This method is difficult to model the behavior of pile group foundation subjected to lateral loading. The limitation can be overcome with the utilization of the finite element method (FEM) or finite different method (FDM) to represent a pile element embedded in a soil medium. Both the ground and piles are modeled with soild elements. The solid elements, which do not have rotational degree of freedom, is not appropriate for modeling piles. It can be overcome by substantially increasing the number of elements, which can be prohibitive for 3D modeling. This paper used the beam element and rigid link incorporated in the OpenSees to model the pile. The accuracy of the model is validated through comparison with lateral load test and BNWF analysis. It is shown that the method can capture the measured behavior accurately. It is therefore recommended to be used in group pile analyses.