• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.351-352
• /
• 2007

• Annual Conference of KIPS
• /
• 2014.11a
• /
• pp.192-195
• /
• 2014

급변하는 글로벌 비즈니즈 환경속에서 물류의 역할은 나날이 증가하고 있다. 아울러 기존의 노동 집약적 물류 산업의 탈피가 가속화 되어 있으며, 고부과가치 물류 시스템 구축으로 융복합 기술을 활용한 새로운 모습으로 변화를 요구하고 있다. 특히, 물류 분야 중 자동차 생산 분류에 선재 관리를 통해 기업과 기업으로 서로 운송되어 분류되어 있으며, 차량 선재 분류는 자동화 통해 수행하고 있으나, 생산된 선재는 색깔별, 두께별로 일괄적으로 생산하여 나중에 선재를 작업자가 분류지를 보면서 작업을 하고 있하고 있다. 그러나, 선재 분류자는 반복적인 업무와 피로 누적으로 휴멘 에러가 발생으로 선재의 누락 혼합 발생되어 선재 물류 납품 시 이 차 기업으로 비용과 시간적 피해가 발생하게 된다. 따라서, 본 연구에서는 차량 선재 공정 분류와 그룹 모니터링 장치 기반의 선재 물류 분류 장치를 통해 공정을 개선하고자 한다.

• ICROS
• /
• v.4 no.4
• /
• pp.25-30
• /
• 1998

본 고에서는 반도체 생산 장비의 하나인 고속 열처리 공정기를 소개하고, 현재의 기술 동향과 그에 따른 기술발전의 추이를 논의 하였다. 고속 열처리 공정기는 단일 웨이퍼 가공기로서 각각의 웨이퍼가 동일한 환경하에서 가공될 수 있다는 장점 때문에 앞으로 웨이퍼가 대형화되고 다품종 소량생산이 요구되면서 더욱더 주목받게 되고 또한 반도체 생산에 있어서 핵심이 될 장비이다. 따라서 현재 고속 열처리 공정기를 실제 현장에서 널리 사용하지 못하고 있는 큰 이유 중의 하나인 웨이퍼의 온도 균일성 문제를 해결하는 것이 현 시점에서 매우 중요하다. 그리고 여러 챔버를 연결하여 다양한 작업을 일괄적으로 처리할 수 있는 다 챔버 과정으로의 발전도 필요하다고 할 수 있다. 반도체 생산장비의 대다수를 수입에 의존하고 있는 국내 현실을 고려할 때 반도체 생산기술의 국산화는 매우 중요하다. 따라서 차세대 반도체 생산장비로 주목받고 있는 고속 열처리 공정기의 생산기술을 국산화하는 것은 그 의미가 크다고 할 수 있다. 이를 위하여 산업계와 학계의 지속적인 관심과 좋은 연구결과를 기대한다.

• The Korean Journal of Applied Statistics
• /
• v.27 no.4
• /
• pp.543-552
• /
• 2014

High bandwidth RF such as Bluetooth, GPRS, EDGE, 3GSM, HSDPA is papular in the mobile phone market. A non-conducting metal coating process requires an e-beam deposition of metal, two steps of UV hard coating primer and top coating; however, it is inefficient. We navigate to the electron beam irradiation conditions(resin surface treatment conditions) in the PC/ABS resin injection process. By analyzing the experimental results, we find the optimum development conditions for the electro deposition pre-treatment process and mass production lines using the plasma generated electron beam source.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.341-345
• /
• 2001

New technoloty called microcellular foaming process was developed at MIT in 1980's. Although it has many good things, it could not be used it all sides of manufacturing plastics. Because it takes a long time for making foamed goods. So microcellular foaming injection molding process appeared to solve this problem. The first purpose of this research is to measure the impact strength as foaming magnitude of microcellular foamed plastics. There are two methods such as batch process and microcellular foaming injection molding process in making foamed plastics. According to the experimental data, the impact strength of each specimen was measured to find out the influence of foaming magnitude of microcellular foamed plastics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.47-50
• /
• 2004

This paper deals with the problem of batching and scheduling of jobs whose processing times are different respectively But, they are given as not the exact value but the range from the lower limits to the upper, which makes it possible to group jobs into batches. The grouping of jobs is desirable because of the capability of the batch processor to accommodate several jobs at once. The time required to process the jobs in any batch depends on their lower limit processing times. Once processing is initiated on a batch processor, the batch cannot be interrupted, nor can other jobs be started. And all jobs are assumed to be simultaneously available. This paper develops the model to describe these situation and a heuristic method to minimize its total tardiness.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.360-365
• /
• 2003

미곡종합처리장은 개소 당 평균 30억이 투자되는 방대한 시설로 수확된 산물상태의 벼를 수집ㆍ건조ㆍ저장ㆍ가공 및 포장공정이 일괄적으로 처리되는 농업의 첨단기술이 결집된 시설이라 할 수 있다. 미곡처리장은 약 80개의 단위기계와 100여종의 부대시설로 구성되어 있다. 미곡종합처리장은 거의 모든 과정이 중앙제어기에 의해 제어 가능하다. 그러나 미곡종합 처리장의 상온통풍건조시설은 기상조건, 투입벼의 함수율 및 반입량에 따라서 송풍기와 히터의 운전방법을 달리해야 하며, 또한 투입벼의 함수율에 따라서 벼의 퇴적고를 달리해야 하는 등 시설의 운전에 세심한 주의가 필요하다. (중략)

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.23-25
• /
• 2006

Optimization of process variables, including oxygen and water partial pressure and also an nesting temperature, was performed in batch-type process to fabricate YBCO films on LaAlO3 single crystal. In this work, YBCO oxide powder was used as a starting precursor for metal-organic deposition(MOD)method. The precursor films were fabricated in batch furnace and they were converted to the epitaxial YBCO films at the same furnace with varying the process variables. The oxygen partial pressure was varied from 100ppm to 2000ppm and the water partial pressure from 1.2% to 12.2%. The window for optimal P(O2) was narrow about 700ppm for batch-type process. YBCO films in bathc-thype MOD process were optimized at 740-770oC and P(H2O) of 2.3%-7.3%.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.44-51
• /
• 2006

In this paper, we present a network-based integrated nesting system, that is adapted a current engineering concept. Generally, sheet cutting processes proceed in turn following an existing order In this study, however, the special characteristics of these processes were analyzed and the processes were redesigned with distributed design so that they could be operated in a client/server environment. Also, the necessary sheet material cutting processes, part CAD, nesting, part CAM, and NC post-processor capabilities, were implemented so that many workers could handle them all on the Web. Compared to existing commonly used systems, the developed system can provide integrated work environment for cutting automation, allow job collaboration between workers, and it has proved that it can shorten the standby time for work. By grafting computer system technologies to sheet material cutting automation field, this research expects to contribute to the enhancement of factory automation efficiency and productivity.