• Korean Journal of Food Science and Technology
• /
• v.14 no.2
• /
• pp.106-111
• /
• 1982

To investigate the soybean trypsin inhibitors from seven varieties of soybeans and their twenty one $F_1-hybrids$, water soluble proteins were extracted. Trypsin inhibitors were isolated from those proteins and purified by sephadex G-75 column chromatography and polyacrylamide gel electrophresis. Total 16 kinds of trypsin inhibitors were isolated. From each variety of soybeans, $5{\sim}12$ kinds of trysin inhibitors could be detected and among them, 5 kinds of trypsin inhibitors were mainly distributed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.42-49
• /
• 2015

The pressure oscillation induced by inhibitor in a solid rocket motor has been investigated by 3D large eddy simulation(LES) and proper orthogonal decomposition(POD). The vortex generation and breakdown at inhibitor are periodically observed between the inhibitor and the nozzle by flow-acoustic coupling mechanism. The excitation of pressure oscillation occurs as the flow impinges on the submerged nozzle head which recirculate in the cavity in rear dome of the motor chamber. The vortex generation frequency is closely related with the shedding frequencies of the detached vorticities at the inhibiter, which fairly compared with the experimental data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.253-257
• /
• 2011

Vortex generation mechanism by inhibitor in a solid rocket motor have been investigated by 3D Large Eddy Simulation turbulent model. Most of the result of the present study are in good agreement with experimental data and previous numerical calculation. Vortex generation and breakdown behind inhibitor are periodically observed between inhibitor and nozzle head by flow-acoustic coupling mechanism. Vortex generation frequency is the same as the second-mode frequency in the motor. The roll shape vortex generation behind inhibitor induces non-uniform flow field at the nozzle entrance and its throat.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.31-37
• /
• 2011

Detail flow structure in a large solid rocket motor with two inhibitors has been investigated using 3D Large Eddy Simulation and Proper Orthogonal Decomposition(POD) analysis. Vortex shedding frequencies periodically occurred by inhibitors are coupled with flow acoustics induced by the impinging of vorticity on nozzle head. As a result of 3D analysis, it was observed that the nozzle exit flow causes roll-torques from the vortex being decomposed in unbalanced shape for the impinging of vorticity on the nozzle head.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.1
• /
• pp.49-54
• /
• 2004

This paper is purpose to manufacture of inhibitor switch using CAM systems. CAM systems are consist of CAD(AutoCAD), CAM(Omega) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for data network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.2
• /
• pp.173-181
• /
• 2007

Recently, galvanizing method is predominantly being used not only a economical point of view but also due to it s stability and long life. For example, guard rail of high way, all kinds of structures for ship etc. were protected with galvanizing and demand of galvanized structural materials was being increased with more and more. However, galvanized structures were inevitably being deteriorated with time eventually because they were corroded with solution of galvanizing film and exfoliation of it s film in the present severe corrosive environment. Therefore, it is necessary to improve the corrosion resistance of the galvanizing film through various methods such as variation of chemical composition of galvanizing bath, chromate treatment and coating treatment. In this study, three test specimens such as pure galvanizing, galvarium, and chromate treatment were submerged at tap water with inhibitor addition. And the effect of their corrosion resistance improvement was comparatively investigated with electrochemical method. Corrosion current density of the galvanized steel was the largest among three specimens, however, the galvarium steel showed the lowest corrosion current density. Futhermore, these three kinds of test specimens indicated considerably excellent corrosion resistance by dipped at tap water with inhibitor addition. Especially, the galvanized steel showed the best effect of corrosion resistance improvement than other test specimens.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.46-46
• /
• 2011

각종산업의 건축자재, 전기기기 등의 분야에서 내식성 향상용 표면처리 도금재로 가장 많이 사용되고 있는 아연과 실용금속 중 가장 가벼우면서 비강도 및 치수 안정성이 뛰어난 Mg을 사용하여 Zn-Mg의 합금 박막을 제작하였다. 여기서는 Zn, Mg 단일 박막의 밀착성과 내식성의 한계점을 극복하기 위해서 모재와 코팅층 사이에 Al을 삽입하여 (Zn-Mg)/Al 합금 박막을 형성시켰다. 또한 박막의 증착과정 중 이들 막의 제어는 바이아스 전압을 일정하게 하고 진공도를 변수로 하였고, 진공도에 따라 달라지는 쳄버내의 가스 입자가 흡착 인히비터로 작용해서 박막의 몰포로지와 결정배향성의 구조에 중요한 영향을 준다는 것을 확인하였다. 그리고 이들 박막의 내식성과 밀착성에 미치는 몰포로지나 결정배향성과의 상관관계를 규명하여 최적의 코팅 프로세스를 결정하므로써 중간층 유무별 Zn계 합금박막의 기초적인 제작설계 지침을 제공하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.194-194
• /
• 2015

본 연구에서는 PVD법 중의 하나인 스퍼터링(sputtering) 기술을 이용하여 향상된 희생양극(sacrificial anode)적 특성을 가지는 Al-Mg 막을 제작함은 물론 그 제작조건, 표면의 몰포로지, 결정구조학적 결정배향성과의 연관성을 해석 및 전기화학적 내식특성평가 등을 통하여 종합적인 결과를 고찰-정리해 보았다. 이를 통해 박막의 증착과정 중 가스압의 변화가 흡착 인히비터로 작용하여 박막의 몰포로지와 결정배향성에 미치는 영향을 분석하였으며 이러한 표면 몰포로지, 결정배향성과 내식성간 상관관계를 해석하여 최적의 Al-Mg 막 설계 지침을 제시하고자 하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.1
• /
• pp.96-103
• /
• 1998

Lead-acid battery is being most widely used with secondary battery because of its low price, and long life cycles. But According to using for a long time, its voltage, capacity, and recovery ability is decreased gradually. Therefore there are many papers about improving the property of a lead-acid battery. One of them is to slow down sulfation due to formation of inner PbSO sub(4) by adding inhibitor to electrolyte, however it was not well known what is inhibitor's composition and its role acting on both cathodic and anodic electrode because of its know-how of every country and companies. The purpose of this paper is to study about improvement of property of lead-acid battery by adding one of the inhibitor to H sub(2) SO sub(4) electrolyte.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.11a
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.