• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.389-405
• /
• 2001

In these days, we have increasing demands on the real-time services, especially for the multimedia data transmission in both of wired and wireless environments and thus efficient and stable ways of transmitting realtime data are needs. Although RTP is widely used for internet-based realtime applications, it cannot avoid packet losses, due to the use of UDP stack and its underlying layers. In the case of mobile computing applications, the packet losses are more frequent and consecutive because of the limited bandwidth. In this paper, we first statistically analyze the characteristics of packet losses in the wired and wireless communications, based on Gilbert model, and a new packet recovery scheme for realtime data transmission is presented. To reflect the transmission characteristics of the present network environment, our scheme makes the sender to dynamically adjust the amount of redundant information, using the current packet loss characteristic parameters reported by the receiver. Additionally, we use relatively large and discontinuous offset values, which enables us to recover from both of the random and consecutive packet losses. Due to these characteristics, our scheme is suitable for the mobile computing environment where packet loss rates are relatively high and varies rapidly in a wide range. Since our scheme is based on the analytic model form statistics, it can also be used for other network environments. We have implemented the scheme with Mobile IP and RTP/RTCP protocols to experimentally verify its efficiency.

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1268-1279
• /
• 2015

In order to manage a large number of devices connected to the Internet of Things (IoT), the Internet Engineering Task Force (IETF) proposed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). The route of the RPL network is generated through the use of an Objective Function (OF) that is suitable for the service that is required for the IoT network. Since the route of the RPL network is conventionally simply chosen only by considering the link quality between the nodes, it is sensible to seek an OF that can also provide better Quality of Service (QoS). In previous studies, the end-to-end delay might possibly be sub-optimal because they only deal with problems related to the reduction of energy consumption and not to the link quality on the path to the sink node. In this study, we propose a scheme that reduces the end-to-end delay but also gives full consideration to both the quality on the entire route to the destination and to the expected lifetime of nodes with bottlenecks from heaped traffic. Weighting factors for the proposed scheme are chosen by experiments and the proposed scheme can reduce the end-to-end delay and the energy consumption of previous studies by 20.8% and 10.5%, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.661-667
• /
• 2018

Recently, the smart home market is growing due to the development of wireless communication technology and sensor devices, and various devices are being utilized. Such an IoT environment collects various vast amount of device information for intelligent services, receives services based on user information, controls various devices, and provides communication between different types of devices. However, with this growth, various security threats are occurring in the smart home environment. In fact, Proofpoint and HP warned about the cases of damage in a smart home environment and the severity of security vulnerabilities, and cases of infringement in various environments were announced. Therefore, in this paper, we have studied secure mutual authentication method between smart nodes used in smart home to solve security problems that may occur in smart home environment. In the case of the proposed thesis, security evaluations are performed using random numbers and frequently updated session keys and secret keys for well-known vulnerabilities that can occur in IoT environments and sensor devices such as sniffing, spoofing, device mutual authentication, And safety. In addition, it is confirmed that it is superior in security and key management through comparison with existing smart home security protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.374-380
• /
• 2017

The Internet of Things (IoT) refers to intelligent technologies and services that connect all things to the internet so they can interactively communicate with people, other things, and other systems. The development of the IoT environment accompanies advances in network protocols applicable to more lightweight and intelligent sensors, and lightweight and diverse environments. The development of those elemental technologies is promoting the rapid progress in smart car environments that provide safety features and user convenience. These developments in smart car services will bring a positive effect, but can also lead to a catastrophe for a person's life if security issues with the services are not resolved. Although smart cars have various features with different types of communications functions to control the vehicles under the existing platforms, insecure features and functions may bring various security threats, such as bypassing authentication, malfunctions through illegitimate control of the vehicle via data forgery, and leaking of private information. In this paper, we look at types of smart car services in the IoT, deriving the security threats from smart car services based on various scenarios, suggesting countermeasures against them, and we finally propose a safe smart car application plan.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.85-90
• /
• 2017

Indoor location-based services have been developed based on the Internet of Things technologies which measure and analyze users who are moving in their daily lives. These various indoor positioning technologies require separate hardware and have several disadvantages, such as a communication protocol which becomes complicated. Based on the fact that a reduction in signal strength occurs according to the distance due to the physical characteristics of the transmitted signal, RSSI technology that uses the received signal strength of the wireless signal used in this paper measures the strength of the transmitted signal and the intensity of the attenuated received signal and then calculates the distance between a transmitter and a receiver, which requires no separate costs and makes to implement simple measurements. It was applied calculating the value for the average RSSI and the RSSI filtering feedback. Filtering is used to reduce the error of the RSSI values that are measured at long distance.It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements.

• Journal of Korea Multimedia Society
• /
• v.7 no.7
• /
• pp.896-904
• /
• 2004

In this paper, We present an efficient variable rate speech coder for spectral efficiency and packet processing technique for packet loss compensation of a voice codec with 10msec frame in VoIP service. Through disconnecting the users from the spectral resource during silence interval of about 60% period, a variable rate voice coder based on a voice activity detection(VAD) can increase spectral gain by two times. The performance of the method was analyzed by variation of detected voice activity factor and degraded speech frame ratio under various background noise level, and compared those of G.729B of ITU-T 8kbps standard speech codec. A method to compensate lost packets utilized addition of recovery data to a main stream and error concealment scheme for speech quality enhancement, the performance is verified by reconstructed speech quality. The proposed scheme can achieve spectral gain by two times or enhance speech quality by 3dB through reserved bandwidth of VAD. Therefore, the proposed method can enhance a spectral efficiency or speech quality of VoIP.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1441-1451
• /
• 2015

As one of the most spotlighted research areas, these days, the Internet of Things (IoT) aims to provide users with various services through many devices. Since there exist so many devices in IoT environments, it is inefficient to manually configure the domain name system (DNS) names of such devices. Thus, for IPv6-based IoT environments, this paper proposes a scheme called the DNS Name Autoconfiguration (DNSNA) that autoconfigures an IoT device's DNS name and manages it. In the procedure for generating and registering an IoT device's DNS name, the standard protocols of the Internet Engineering Task Force (IETF) are used. Since the proposed scheme resolves an IoT device's DNS name into an IPv6 address in unicast through a DNS server, it generates less traffic than multicast-based mDNS (Multicast DNS) which is a legacy DNS application for the DNS name service in the smart home. Thus, the proposed scheme is more appropriate in multi-hop IoT networks than mDNS. This paper explains the design of the proposed scheme and its service scenarios, such as smart home and smart road. It also explains the implementation and testing of the proposed scheme in the smart grid.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.27-40
• /
• 2016

This paper aims to analyze the business types of 237 IoT based smart home companies in the world (launched during 1999~2014) which got global investment last few years. For this, the previous literatures trying to analze technology and service types of smart home are searched and the typology of the platform is discussed. Based on it, this research conceptualizes an analysis framework that includes three areas of smart home like home automation, home security, and energy efficiency with the three platform types like product, software, and service. This study concludes that the development of business type for IoT based smart home ecosystem is from the product to software and it can be a platform or not. In current status, there are a few platforms of product and software, but in the device management (16%) and thermostat (11%), companies are persuing more platform like. It is difficult to find the service platform in overall areas, for application based service has a few attractions in the investment market due to the lack of cloud infrastructure and data analytics. The following three are the implication to domestic market: 1) More active offering of API and SDK, 2) more active introduction of wireless Intenet network protocols, and 3) more active interoperability efforts and alliance activities are needed.

• Journal of Internet Computing and Services
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2021

As the Internet developed, various and complex cyber attacks began to emerge. Various detection systems were used outside the network to defend against attacks, but systems and studies to detect attackers inside were remarkably rare, causing great problems because they could not detect attackers inside. To solve this problem, studies on the lateral movement detection system that tracks and detects the attacker's movements have begun to emerge. Especially, the method of using the Remote Desktop Protocol (RDP) is simple but shows very good results. Nevertheless, previous studies did not consider the effects and relationships of each logon host itself, and the features presented also provided very low results in some models. There was also a problem that the model could not explain why it predicts that way, which resulted in reliability and robustness problems of the model. To address this problem, this study proposes an interpretable RDP-based lateral movement detection system using page rank algorithm and SHAP(Shapley Additive Explanations). Using page rank algorithms and various statistical techniques, we create features that can be used in various models and we provide explanations for model prediction using SHAP. In this study, we generated features that show higher performance in most models than previous studies and explained them using SHAP.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.48-56
• /
• 2008

This study provides to car driver with car exhaust gas and sensor information which are car trouble code in engine and many sensors when the car has some problems. This is to provide car manager with many information of car sensors when we go to vehicle maintenance. For example, information of engine RPM, fuel system, intake air temperature, air flow sensors and oxygen sensors can provide to owner or garage, and also add to multimedia system for mp3 files and video files. This system consists of embedded linux system of low power while driving the car which uses OBD-II protocols and zigbee communication interface from CAN communication of car system to self-diagnosis embedded system of car. Finally, low power embedded system has a lot of application and OBD-II protocols for embedded linux system and CAN communication which get sensor informations of car control sensor system while driving the car.