• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.219-228
• /
• 1995

본 연구는 기존의 연구 방법과는 상이한 방법을 이용하여 인체의 특정 부위를 측정하거나 측정치의 산출을 위한 기법을 Fractal의 기법을 이용하여 고찰하고자 함에 있다. 인간공학적인 측면에서 볼 때 인체 구성의 관찰 및 측정은 실험기기를 이용하거나 기타 방법으로 행하는 것이 일반적이다. 여기서는 이러한 결과치가 도출되기 까지의 방법들을 Fractal 기법으로 접근하여 인체의 특정 부위의 측정치를 구하고자 하는데 목적을 둔다. 따라서 Chaos 이론과 Fractal 이론을 먼저 이해하고 이에 접근할 수 있는 최적의 방법들을 선정 하여 인간공학적인 측면에서 제시되는 해에 부합되는 결과치를 도출하고자 하는데 있다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.959-967
• /
• 2008

The body measurement ratios and indices used in this study are all 3D female measurement data of the two countries were obtained from Size Korea Project and SizeUSA Project. The purpose of the study is to compare and analyze body measurement data between two countries. The results of this research are helpful for the clothing manufacturer and company to trade with America. The samples were 1,988 Korean and 6,306 American females. Thirty-five body measurement ratios and indices were chosen as the principal measurements in making garments. The conclusion of this research was as follow; First, U.S. females have measurements that exceed Korean women, except for crotch length total and shoulder slope. Second, the correlation coefficients of height and weight are relatively higher than other measurements in the two countries' body measurements. Finally, American women's height ratios are significantly bigger than Korean women's in most height ratios. On the other hand, Korean are significantly bigger than American in weight ratios. The drop values of Korean females are also smaller than those of American. It was recognized that American women are much bigger, wider and more obese than Korean according to the results by utilizing the girth ratios. BMI, Rohrer and Vervaeck index.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.6 s.165
• /
• pp.892-901
• /
• 2007

This research is the initial step for establishing a convertible body sizing table applicable to the Korean and American female apparel industry. All 3D female measurement data of the two countries were obtained from Size Korea Project and SizeUSA Project. The sample subjects used in this study were 1,988 Korean and 6,306 American females. Thirty-four(34) variables were chosen as the principal measurements in making garments. The conclusion of this research was as follow: First, it was determined that American women were larger and longer than Korean women in all measurement except shoulder slope measurement. Second, according to the differences analysis of the each age group in Korean Females, all measurements except hip girth had significant differences among the age groups. In case of American females, all measurements except arm length(shoulder to wrist) had significant differences among the age groups. Third, in the comparison of differences between the age groups of the two countries' women, some dimensions varied significantly with age, while others did not show any statistical significance among the age groups. Fourth, according to the t-tests of same age groups between Korean & American female measurements, American female measurements were larger and longer than Korean in all measurements except crotch length total, shoulder slope, hip girth-bust girth and hip girth-waist girth.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.12 s.148
• /
• pp.1595-1607
• /
• 2005

Three-dimensional(3-D) body scanners used to capture anthropometric measurements are now becoming a common research tool far apparel. This study had two goals, to test the accuracy and reliability of 3-D measurements of dynamic postures, and !o analyze the change in upper body surface measurements between the standard anthropometric position and various dynamic positions. A comparison of body surface measurements using two different measuring methods, 3-D scan measurements using virtual tools on the computer screen and traditional manual measurements for a standard anthropometric posture and for a posture with shoulder flexion were $-2\~20mm$. Girth items showed some disagreement of values between the two methods. None of the measurements were significantly different except f3r the neckbase girth for any of the measuring methods or postures. Scan measurements of the upper body items showed significant linear surface change in the dynamic postures. Shoulder length, interscye front and back, and biacromion length were the items most affected in the dynamic postures. Changes of linear body surface were very similar for the two measuring methods within the same posture. The repeatability of data taken from the 3-D scans using virtual tools showed satisfactory results. Three times repeated scan measurements f3r the scapula protraction and scapula elevation posture were proven to be statistically the same for all measurement items. Measurements from automatic measuring software that measured the 3-D scan with no manual intervention were compared with the measurements using virtual tools. Many measurements from the automatic program were larger and showed quite different values.

• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.51-51
• /
• 1995

인체 CAD 모델링 시스템은 장비와 인체를 모델링하여설계 초기단계에서 부터 별도의 Mock-up 없이 전 벙위의 운용자에 대한 작업자세의 안락도(Comfort), 동작한계(Reach), 적 합성(Fit), 시계(Vision)등 제반 작업공간 설계 및 평가에 수반되는 고려요소들을 보다 과학적 이고 합리적으로 반영할 수 있는 도구로 인식되고 있다. 본 연구는 크게 한국군 전차병의 인체 CAD 모델의 설계와 설계된 인체 모델을 활용한 한국형 전차 작업공간 평가로 구성되었다. 한국 군 전차병의 인체 CAD 모델링에서는 전차병의 인체 측정자료를 이용하여 5%, 50%, 95%치 전차병 에 대한 선 자세와 앉은 자세의 인체 모델을 설계하였으며, 보다 정확한 인체 모델의 구현을 위 해인체의 기능적 치수에 대한 실측치와 CAD 설계치와의 차이를 비교, 보정하여 줌으로써 작업공 간 평가시 보다 정확한 결과를 얻을 수 있도록 하였다. 한국형 전차 작업공간 평가에서는 설계 된 인체 모델과 한국형 전차 주요 구성품의 CAD 모델을 활용하여 각 승무원의 작업역을 분석하였고, 승무원 해치, 주요 조종장치의 운용 적합성, 판넬류 등의 위치 적합성에 대해 분석, 평가하였다. 본 연구를 통해 무기체계를 대상으로 하여 CAD 프로그램을 이용한 Man-Machine Interface에 대한 검토가 이루어 졌으며, 기존의 도면이나, Mock-up, Prototype에 의존하던 작업공간 타당성 검토가 CAD를 이용하여 3차원적으로 이루어 질 수 있는 기반을 마련하였다는데 의의가 있다.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2693-2696
• /
• 2003

The national standard physique research of Korea is being conducted every 5-6 year term after its first research was started in 1979, the fourth research was conducted in 1997. The result of the national physique research was reflected in manufactured goods design of allied industries such as clothing, shoes, furniture. In this thesis, we measured anthropometry value for every bodily figurative classification after dividing users according to gender, age, bodily figure using the result of the national standard physique research. We constructed 3D character through the process of analyzing interrelation of measured anthropometry and measuring representative category. For the process for organization, we measured anthropometry which can express sports action of golf, tennis and etc effectively. We made it by Presenting measurement which is able to form each type of 3D character after the category was decided. Quantitative and objective valuation for posture and action became possible by developing visible information offer and posture action analysis protocol in theoretical approach for analysis of posture and action in sports.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.233-253
• /
• 2024

This study analyzed differences between three-dimensional (3D) body scanning and manual measurements, aiming to assess whether 3D scanning can replace traditional anthropometric tools, such as tape measures and calipers. Data from 4,478 participants in the 8th Size Korea Project were analyzed, covering 43 measurement items. Since Given that the 3D and manual measurements were performed on the same subjects in the 8th Size Korea Project, it was possible to determine the correlation more accurately between the two measurement methods more accurately. Using Applying ISO 20685-1(2018) standards, 15 out of the 43 items fell within allowable error limits. When classified into six types, "small circumferences" and "segment lengths" showed averages of 3.35 mm and 3.10 mm, respectively, within acceptable range. "Body heights" and "body depths" slightly exceeded the limit, with averages of 5.28 mm and 6.58 mm. "Body widths" and "large circumferences" surpassed the limit, with means of 16.77 mm and 16.18 mm. The study offers an objective basis to for validate validating 3D measurements' measurements' reliability and accuracy, addressing various industries' needs for information on the human body's dimensions information.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.12-21
• /
• 1997

무선의 자원을 사용하는 통신장비들의 급속한 보급으로 인체가 RF에 노출될 때의 영향에 관심이 고조되고 있고, 이동 전화기의 인체영향에 대한 연구가 활발히 진행되고 있다. 이를 바탕으로 국제적인 인체영향 규제치와 규정근거 및 측정방법에 대한 이론적 전개가 활발히 진행되고 요구된다. 특히, 이중에서도 셀룰라 전화기에서 발생하는 RF의 인체영향에 대한 역학적 또는 암 발생에 관한 국 제연구 동향을 살펴보고 셀룰라 전화기와 심장박동기의 간섭에 대하여 알아본다.

• Archives of design research
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2001

The gait characteristics and shapes of human foot are changed by their diseases and habits. Especially, it is known that the size and shape of foot of the elderly(aged) differ from these of youth foot, because of muscle degeneration and wearing footwear for a long time. Therefore, to design and make last for the elder footwear, anthropometric data measured elder feet and classified their foot type will be necessary. Nevertheless, elder footwear has been designed and made by using the same last of the youth. Therefore, to design elder footwear, we measured 49 anthropometric data on foot of the 252 elderly males and females, and classified their foot shape and type according to FI(foot index) and MPA(matarars-phalanx angle) in this study. The results showed that the elderly has a tendency of slenderizing on foot compare to the youth, and elderly females have more deformed foot type than elderly males. The results can be provided as basic information to the design of elder footwear.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.240-243
• /
• 2002

본 연구에서는 인간공학적 평가를 위한 한국인 인체모델을 개발하고, 인체 모델의 평가를 위해 팔 동작의 시뮬레이션 및 리치 평가를 수행하였다. 한국인의 인체측정자료를 이용하여 통계학적 분석을 실시하고, 인체 자료생성 프로그램을 통해 인체 각 지체들의 특성치와 상관관계를 얻었다. 이를 바탕으로 인체 모델을 구성하고 가상 공간에서의 용이한 적용을 위해 인체 모델은 3차원 그래픽 기술을 통해 가시화되었다. 차량모델과 인체모델을 통합하고 차량 내에서 운전자의 팔 동작 표현 및 리치 평가기능을 구현하였다.