• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.77-84
• /
• 2003

발파진동은 보통 지반진동속도로 계측되며, 발파설계나 구조물의 피해 산정에 사용된다 그러나 인체의 반응-이나 가축의 피해 산정 문제에서는 현행 소음진동규제법과 관련하여 인체의 감각적 감응척도에 따른 진동레벨을 주로 사용하므로 변환이 필요하다. 본 연구에서는 디지털 필터에 의한 진동레벨 변환 프로그램을 이용하여 진동의 특성이 따른 진동레벨 변환의 특성을 고찰하고 문제점을 제시하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3119-3127
• /
• 2000

This paper is a study to find a new method of feature selection for vibrationof buman body by analyzing correlationof vibration between King Songdok Bell and Human body. The vibration characteristics are analyzed by matching body, vocal tract, diaphragm and asymmetrical clements of human body with Bell, resonator, hole in the ground and asymmetical elements. In the result, the characteristics of sound vibrationof King Songdok Bell is useful to apply it to vibration characteristics of human body because the vibration characteristics of ech elements is alike.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.59-65
• /
• 2000

This paper describes the analysis of vibration characteristics through the human body as the research for voice therapy and diagnosis. The oscillation signal is not external forces but the self-voice to be pronounced the vowels ('a', 'e', 'i', 'o', 'u'). The experiment system consists of microphones, accelerometers and amplifiers. The input data are stored by the computer. At the same time, the voice is stored by the microphone and the vibration signal of the human body is stored by accelerometer. The 63 points are appointed in head, neck, trunk of human body. The positions and number of times are changeable by the purpose. The analysis parameters are amplitude, phase, fundamental. frequency, formant and the correlation of vibration signal and voice is measured by coherence function. The results show that the vibration signals have characteristic vibration in the positions of human body.

• Journal of the Korean Society for Railway
• /
• v.18 no.3
• /
• pp.194-202
• /
• 2015

In this paper, dynamic modeling with viscoelastic properties of a human body resting on a seat is presented to quantitatively analyze ride quality of passengers exposed to vertical vibrations. In describing the motions of a seated body, a 5 degree-of-freedom multibody model from the literature is investigated. The viscoelastic characteristics of seats used in railway vehicles are mathematically formulated with nonlinear stiffness characteristics and convolution integrals representing time delay terms. Transfer functions for the floor input are investigated and it is found that these are different in accordance with the input magnitude due to nonlinear characteristics of the seat. Measured floor input at the railway vehicle is used to analyze realistic human vibration characteristics. Frequency weighted RMS acceleration values are calculated and the effects of the seat design parameters on the frequency weighted RMS acceleration values are presented.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.234-236
• /
• 2009

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.354-361
• /
• 1997

본 연구에서는 우선적으로 수도권 대량운송 수단인 지하철 전동차의 진동을 측정하고 인체에 미치는 영향을 평가하였으며 전동차의 진동특성이 인체 각 부위에 전달되는 형태를 분석.평가함으로써 승객과 승무원의 승차감 및 작업환경 향상은 물론 차후 개발되는 고속전철 및 비접지 차량(zero-ground pressure vehicle) 등의 개발에 필요한 기초자료를 제공하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5689-5695
• /
• 2012

In this study, vibration properties of seat and human body are analyzed through test and numerical analysis methods by taking into account the viscoelastic characteristics of polyurethane foam as seat material which is applied for vehicle. These viscoelastic characteristics which show nonlinear and quasi-static behavior are obtained by compression test. In addition, the viscous elastic property of polyurethane foam is modelled mathematically by using convolution integral and nonlinear stiffness model. In order to analyze the performance on ride comfort of seat, vertical vibration model is established by using dynamic model of seat and vertical vibration model of human body at ISO5982, and so the related motion equations are derived. A numerical analysis simulation is applied by using the nonlinear motion equation with Runge-Kutta integral method. The dynamic responses of seat and human body on the input of vibration acceleration measured at the floor of the railway vehicle are examined. The variation of the index value at ride comfort on seat design parameters is analyzed and the methodology on seat design is suggested.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.8
• /
• pp.645-650
• /
• 2003

This paper introduces attempts to obtain the 'representative'characteristics of the apparent mass (or dynamic mass) of seated Korean subjects under vertical vibration. Individual responses of driving-oint apparent masses obtained from forty one Korean subjects are illustrated. Four kinds of vibration levels and three different sitting postures are selected to collect the characteristic responses of each subject. Those individual responses are used to estimate the 'mean'apparent mass, which may be expected to be a representative model to Korean subjects. Several interesting features of the estimated apparent mass are suggested and compared to those of ISO 5982.

• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.299-305
• /
• 2000

In this study, the characteristics of transmitted vibration on hand-arm system are examined when operating electric hand tools. Also through the correlation analysis between anthroponetric data and transmitted vibration, and comparison study with appropriate amount of work done based on the ISO criteriaa, the basic data for the ergonomic work design can be presented. The types of electric tools and works for the experiment are drill (general type and impact type), grinder, wire brush and steel to analyze the characteristics of transmitted vibrations, the amount of transmitted vibrations in X, Y and Z direction at tool(T), hand(H), wrist(W), and the joint between foream and upper arm(A) were measured at the frequency range of 6.3∼1000[HZ]. Also, the limit of human exposure to vibration, and the response of frequency were conducted.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.174-175
• /
• 2013