• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.3
• /
• pp.256-258
• /
• 2008

Osteopoikilosis is a rare, benign hereditary disease, which presents multiple osteosclerotic, and small round nodules in the bone. It is usually detected incidentally by radiological examination. A radionuclide bone scintigraphy is essential in distinguishing osteopoikilosis from osteoblastic metastases, because scintigraphic findings are usually normal in patients with osteopoikilosis. However, there have been no reports about F-18 fluorodeoxyglucose (FDG) PET findings in osteopoikilosis. Herein, we wish to report a case of osteopoikilosis with breast cancer, which could not be seen in either bone scintigraphy or F-18 FDG PET/CT.

• Journal of Energy Engineering
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2003

Thermo-acoustic waves can be generated in a compressible fluid by rapid heating and cooling near the boundary walls. These phenomena are very important mechanism of heat transfer in the space environment in which natural convection does not exist. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air filled enclosure with rapid wall heating are studied numerically. The governing equations were discretized using control volume method, and were solved using PISO algorithm and second-order upwind scheme. For the stable solution time step were considered as t=1$\times$$10^{-9}$ order, and grids are 50$\times$800. The induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. The wave showed sharp front shape and decreased with long tail.

• Journal of Yeungnam Medical Science
• /
• v.5 no.1
• /
• pp.43-48
• /
• 1988

We retrospectively analysed 22 patients pelvic CT, in whom the acetabular fracture were suspected in plain film. And compared and analysed the computed tomogram findings and plain radiographic findings. The results were as follows. CT enables better evaluation of shape, extent, and degree of separation of fragment. CT was helpful in detecting the combinded fracture and soft tissue injuries. CT showed intraarticular loose bodies, which were invisible on plain film. In patients with pelvic trauma, no necessary changing position during CT examination. CT was useful demonstrates the remnant of intraarticular osseous fragment and adequacy of reduction after surgery.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.382-384
• /
• 2011

최근 오일샌드, 극지유전, 심해저자원 등 극한지 자원개발이 활발해짐에 따라 수요가 증대되고 있는 극한지용 내마식 소재는 내마식성과 함께 저온 인성이 요구되고 있다. 철계 합금에서 관찰되는 변형유기 마르텐사이트 상변태는 입자의 충돌에 의한 충격을 흡수하고 소재의 표면을 가공경화시켜 내마식성 향상 및 저온 인성에 기여할 수 있을 것으로 기대되고 있지만 합금조성의 정교한 제어가 필요하기 때문에 오버레이 용접에 적용하기 위해서는 모재와의 희석률을 제어하는 방안이 필요하다. 용접플럭스 설계기술은 용접시 금속이행모드, 용융풀 거동 등과 같은 용접현상 제어를 통해 오버레이 용접재료의 용접성과 용접비드형상, 용접부 희석률을 최적화할 수 있는 기술이다. 본 연구에서는 내마식 고인성 오버레이 용접재료의 개발을 위해 다양한 용접플럭스를 첨가한 메탈코어드 와이어를 제조하고 일정 송급속도에서 GMA 용접시 용접전압과 용접전류 간의 관계를 분석하여 용접플럭스가 아크현상 및 희석률에 미치는 영향을 조사하였다.

• Journal of Yeungnam Medical Science
• /
• v.1 no.1
• /
• pp.199-206
• /
• 1984

With respect to the histogenesis of the neurofibroma, there are many controversies, since von Recklinghausen postulated that neurofibromas are mainly fibrous tumors arising from the connective tissue of the nerve sheaths. According to the recent studies through the electron microscope, the neoplastic perineurial cells are regarded as the main components of the tumor. So, the neurofibroma enucleated from the median nerve at the level of proximal arm without resulting neurologic sequale was examined through the light- and electron microscope. Ultrastructurally, this tumor is composed of the perineurial cells, fibroblasts, and collagen fibers. The predominant perineurial cells show distinct basal lamina, and contain abundant microfilaments.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.72-72
• /
• 2010

최근 오일샌드, 극지유전, 심해저자원 등 극한지 자원개발이 활발해짐에 따라 수요가 증대되고 있는 극한지용 내마식 소재는 내마식성과 함께 저온 인성이 요구된다. 철계 합금에서 관찰되는 변형유기 마르텐사이트 상변태는 입자의 충돌에 의한 충격을 흡수하고 소재의 표면을 가공경화시켜 내마식성 향상 및 저온 인성에 기여할 수 있을 것으로 기대되고 있지만 합금조성의 정교한 제어가 필요하기 때문에 오버레이 용접에 적용하기 위해서는 모재와의 희석률을 제어하는 방안이 필요하다. 용접플럭스 설계기술은 용접시 금속이행모드, 용융지 유동거동 등과 같은 용접현상 제어를 통해 오버레이 용접재료의 용접성과 용접부 희석률을 최적화할 수 있는 기술이다. 본 연구에서는 내마식 고인성 오버레이 용접재료의 개발을 위해 Fe-12Cr-1.2C 합금조성을 갖는 메탈코어드 와이어에 대하여 아크안정제로 사용되는 Ca 함유 용접플럭스 첨가가 용착부 형상 및 희석률 변화에 미치는 영향을 조사하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.11
• /
• pp.914-922
• /
• 2002

Thermo-acoustic waves can be thermally generated in a compressible flow field by rapid heating and cooling, and chemical reaction near the boundary walls. This mechanism is very important in the space environment in which natural convection does not exist. Also this may be a significant factor for heat transfer when the fluids are close to the thermodynamic critical point. In this study, the generation and transmission characteristics of thermo-acoustic waves in an air-filled confined domain with two-step pulsed heating are studied numerically. The governing equations are discretized using control volume method, and are solved using PISO algorithm and second-order upwind scheme. For the purpose of stable solution, time step was set to the order of $1\times10_-9s,\;and\;grids\;are\;50\times2000$. Results show that temperature and pressure distributions of fluid near the boundary wall subjected to a rapid heating are increased abruptly, and the induced thermo-acoustic wave propagates through the fluid until it decays due to viscous and heat dissipation. Pressure waves have sharp front shape and decay with a long tail in the case of step heating, but these waves have sharp pin shape in the case of pulsed heating.

• Korean Journal of Computational Design and Engineering
• /
• v.20 no.1
• /
• pp.36-43
• /
• 2015

Recently, a number of evaluation studies on availability of plant were carried out. This study was conducted to verify of the reliability of a simulation with some variable such as configuration of process, failure probability density function and the number of iteration times for the natural gas liquefaction plant. The error rate of the KICT-RAM solution was evaluated as 0.03~1.79% compared with the result of the MAROS(commercial solution). And the error-rate change was observed in the range of 0.03~1.75 on the condition of the iteration times as 30, 100, 250. As a result the plant availability evaluation approach of KICT-RAM solution was verified as reasonable. However, the careful approach was required to use the solution because the error-rate increased according to iteration times change.

• Journal of Welding and Joining
• /
• v.23 no.4
• /
• pp.41-47
• /
• 2005

Generally, the use of robots in manufacturing industry has been increased during the past decade. GMA(Gas Metal Arc) welding process is an actively Vowing area, and many new procedures have been developed for use with high strength alloys. One of the basic requirement for the automatic welding applications is to investigate relationships between process parameters and bead geometry. The objective of this paper is to develop a new approach involving the use of neural network and multiple regression methods in the prediction of bead geometry for GMA welding process and to develop an intelligent system that visualize bead geometry in order to employ the robotic GMA welding processes. Examples of the simulation for GMA welding process are supplied to demonstrate and verify the proposed system developed using MATLAB. The developed system could be effectively implemented not oかy for estimating bead geometry, but also employed to monitor and control the bead geometry in real time.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.7-10
• /
• 2011

본 논문에서는 스마트폰을 이용하여 차량을 원격시동 제어 및 관리하는 원격시동 관리 시스템을 제안한다. 이 시스템은 고가의 차량을 관리 및 제어하는 시스템인 만큼 작동의 신뢰성을 중요시 한다. 그래서 기존의 소형 리모콘 방식의 차량 원격시동 제어관리 시스템을 활용하여 시스템 작동의 신뢰도를 높였으며, 기존의 소형 리모콘 제어 환경에서 스마트폰으로 옮겨옴으로써, 기존의 입력 및 제어의 불편함을 해결하였다. 그리고 기존 존재하는 블루투스와 CDMA를 사용하는 차량 원격시동 제어 관리 시스템의 거리 및 속도, 비용 등의 문제점도 개선하였다.