• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.205-221
• /
• 2003

본 연구는 축구화 겉창의 스터드개발시 운동역학적 연구가 스터드개발에 어떻게 영향을 끼치었는가를 국외 선행연구문헌을 고찰함으로서 그 과정을 발견하는데 그 목적을 두었다. 지난 70년간 축구화 스터드가 연구개발되는 과정에서 압력분포측정 실험 및 기타 상해유발요인을 분석함으로서 스터드의 형태을 변화시키는 과정에 있어서 축구장 바닥과 축구화 겉창과의 마찰력이 중요한 변수로 작용하였다. 징이 선수들의 미끄럼을 방지하고 순발력을 향상시켜 경기력 향상에 결정적인 도움을 준 것이다. 이후 징박힌 축구화가 보편화하면서 선수들은 공격수냐 수비수냐 또는 잔디 상태에 따라 징의 개수와 길이가 다른 축구화를 신게 되었는데, 그라운드 컨디션에 따라 신발이 개발되었다. 축구화는 징의 종류에 따라 길고 푹신한 잔디($5{\sim}7$월 잔디)에 신는 50(soft ground)형, 짧고 단단한 잔디(가을철 잔디)에 적합한 FG(firm ground)형, 인조잔디나 아주 짧은 잔디에 좋은 터프(Turf)형, 맨땅에 쓰는 HG(hard ground)형으로 대별되는데, SG형은 15mm가 넘는 마그네슘 징을 6개 박는데 순발력과 파워를 극대화하기 때문에 수비수에 어울리는 스타일이다. 짧은 플리우레탄 징 12개를 다는 FG형은 넓은 그라운드 접촉면을 이루면서도 잔디에 깊게 박히지 않아 유연성을 필요로 하는 공격수와 미드필더들에게 애용된다. 그라운드 상황이 좋지 않은 곳에서 뛰는 국내 고교, 대학 선수들은 12개의 징이 달린 축구화를 선호한다. 스터드가 많을 수록 그라운드에 닿는 면적이 넓어 안정감도 있고 발목이 꺾이는 현상을 줄여주기 때문이다. 지금까지의 연구현황은 압력분포 및 지면반력실험을 이용한 결과치를 이용하여 새로운 타입의 축구화 스터드의 개발결과를 기존결과와 비교 분석하여 상해유발발생요인이 적은 스타일의 스터드를 선호하였다. 이에 향후 연구개발시 운동역학적 연구의 디자인 시 상해유발요인분석과 운동역학적 연구결과의 조합을 결과를 비교분석해서 국내에서도 축구화 겉창 스터드 연구개발시 경기력을 향상시키고, 상해유발요인을 감소시킬 수 있는 연구디자인이 지속되는 것이 중요하다고 사료된다.

• Archives of Plastic Surgery
• /
• v.37 no.6
• /
• pp.788-794
• /
• 2010

Purpose: The fingertip is the most commonly injured part of the hand and its injury frequently results in avulsion or crushing of a segment of the nail bed and fracture of the distal phalangeal bone. Restoration of a flat and smooth nail bed is essential for regrowth of a normal nail, which is important not only for cosmetic reasons but also for tactile capability of the fingertip. It is also anatomical reduction of the distal phalanx to promote patient's cosmetics and prevent nail bed deformity. Absence or no replacement of the nail plate results in obliterated proximal skin fold. When the avulsed nail plate cannot be returned to its anatomic position or when it is absent, we use a synthetic material for splinting the nail bed and alternative reductional method for distal phalangeal bone fracture, especially, instead of hardwares. Methods: From January of 2006 to June of 2009, a total of ten patients and fourteen fingers with crushing or avulsion injuries of the fingertip underwent using the artificial nails for finger splint. We shaped artificial nails into the appropriate sizes for use as fingernail plates. We placed them under the proximal skin fold and sutured to the fold proximally and to the lateral and medial edges of the nail bed or to the distal fingertip. Our splints were as hard as K-wire and other fixation methods and more similar to anatomic nail plates. Artificial nails were kept in place for at least 3 weeks. Results: No artificial nail related complication was noted in any of the ten cases. No other nail fold or nail bed complications were observed, except for minor distal nail deformity because of trauma. Conclusion: In conclusion, in order to secure the nail bed after injury and reduce the distal phalangeal bone fracture, preparing a nail bed splint from a artificial commercial nail is a cheap and effective method, especially, for crushed or avulsion injuries of the fingertip.

• Journal of Chest Surgery
• /
• v.19 no.1
• /
• pp.50-57
• /
• 1986

Sixty-nine patients with various types of cyanotic congenital heart disease underwent systemic-pulmonary artery shunts with a microporous polytetrafluoroethylene [PTFE] prosthesis between 1979 and 1985. Their ages ranged from 2 months to 39 years [mean$\pm$SD: 5.2$\pm$7.4, median: 3.3 years]. Diagnosis included the following: Tetralogy of Fallot, 45: Double outlet right or left ventricle, 11: Single ventricle, .5: Transposition of great vessels, 4: Tricuspid atresia, 3 and Pulmonary atresia with intact ventricular septum, 1. Forty-eight patients had subclavian-pulmonary artery anastomosis, 12 patients aorta-right pulmonary artery anastomosis, 6 patients aorta-main pulmonary artery anastomosis, and 3 patients descending aorta-pulmonary artery anastomosis. The PTEE graft of 3 mm in diameter was used in 1, 4 mm in 29, 5 mm in 35 and 6 mm in 4 patients. Ten patients were died within 30 days after operation [mortality rate: 14.5%]. Among them, 6 patients were operated in urgency due to cardiac arrest or severe anoxic spell after cardiac catheterization, and so surgical mortality of elective operation is 9.5%. The 59 survivors showed improvement of the arterial oxygen saturation [65.4% - 9.8%] and hemoglobin [18.8 gm/dl - 16.0 gm/dl] values [V<0.01]. The follow up period ranged from 1 month to 67 months, [752 patient-months] and during this periods there were 4 late shunt failures after 3 months postoperatively with 4 mm graft, and 2 with 5 mm graft. The over-all patency rate of 4 mm PTFE was 85.9$\pm$9.2% [SEM] in 12 months and 40.9$\pm$22.5% in 24 months. The over-all patency rate of 5 mm PTFE was 87.5$\pm$9.6% in 12 months and 58.3$\pm$24.6% in 36 months. The lowest systolic pressure in death group was 64.9$\pm$15.0 mmHg and in survival group, 86.4$\pm$12.1 mmHg [P<0.001]. We think that the PTFE graft is useful in palliative shunt operation, but the effectiveness of the 4 mm PTFE graft may be limited. The blood pressure also may play an important role in patency of Prosthesis.

• Journal of Chest Surgery
• /
• v.22 no.5
• /
• pp.816-822
• /
• 1989

Aneurysms of the descending thoracic aorta can be caused by various etiologies. So, its abrupt rupture leads life-threatening state, it must be operated as soon as possible. Surgical treatment of the descending thoracic aortic aneurysm requires temporary cross-clamping of major artery. The obligatory occlusion of the descending thoracic aorta during management causes proximal arterial hypertension and distal arterial hypotension. The former may leads to left ventricular failure, or cerebrovascular accident, whereas the latter may leads to spinal cord ischemia or renal injury. Some have recommended insertion of temporary shunt around the occluded descending aorta to prevent above problems. Still others would favor expeditious operation employing simple aortic occlusion during the repair of the descending aorta. Recently we had experienced two cases of dissecting aneurysms of descending thoracic aorta which performed aortoplasty with Gore-Tex conduit under simple aortic occlusion. The one was 34-year-old female patient with traumatic dissecting aortic aneurysm [5 em X 5 cm] on the descending thoracic aorta distal to the origin of the left subclavian artery and the other was 58-year-old female patient with atherosclerotic dissecting descending thoracic aortic aneurysm [6 cmX7 cm] and diffuse abdominal aortic aneurysms [3X5 cm]. Both patients performed standard left posterolateral thoracotomy. After the aneurysmal sac was mobilized, occluding vascular clamps were placed on the transverse aorta proximal to the origin of the left subclavian artery, and on the distal descending aorta without adjuvant bypass procedures for 31 and 32 minutes, respectively, and the aneurysmal sac was repaired with 18 mm ringed Gore-Tex conduit graft. Both patients postoperative courses were uneventful.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.134-139
• /
• 2012

Objectives: This study was conducted to study the analytical variability of A & B counting rules in counting using a phase contrast microscope airborne fibers collected on filters in man-made mineral or vitreous fibers (MMMFs) industries. Methods: Fibers in filters were counted using A & B rules of NIOSH Method 7400. Intra-counter and inter-counter variations by fiber type and density were obtained. The types of MMMFs analyzed were glass wool fiber, rock wool fiber, slag wool fiber, and refractory ceramic fibers. The densities of fibers classified were <20 $fibers/mm^2,$ 20 - <50 $fibers/mm^2$, 50 - <100 $fibers/mm^2,$ and ${\geq}100$ $fibers/mm^2,$ respectively. Results: Intra-counter relative standard deviations by rule A were 0.084, 0.102, 0.071 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.139, 0.120 and 0.142, respectively. Inter-counter relative standard deviations by rule A were 0.281, 0.296, 0.180 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.396, 0.337 and 0.238, respectively. Conclusions: Intra-counter variation was not different significantly among fiber types (p>0.05), but B rule variation for ceramic fibers approximately 2 times greater than corresponding A rule estimates, and intra-counter and inter-counter variations were higher in the low fiber density.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.681-684
• /
• 2010

Immunization information recorded on the Immunization rate in the community to identify the effects of immunization can be monitored. Immunization during an accident can be used as a basis for investigating the cause. Thus, immunization records, and more efficient management in the private and public institutions have conducted immunization information systems to manage the development of integrated system has to be. So, the government projects that promote immunization records were computerized registration. And, in 2009 the development of immunization registration system was completed. In this paper, we use the information to a variety of immunization using smart phone design and implement mobile service.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.174-179
• /
• 2021

The coal tar pitch and phenol resins are used as binders in artificial graphite manufacture, but there are differences in the initial carbon compound structure. According to the carbonization temperature, it can be expected that there are differences in thermal decomposition behavior, microstructure, and crystallinity change. These properties of the coal tar pitch and phenol resins were compared to each other. As the carbonization temperature of coal tar pitch and phenol resin increases, crystallinity tends to increase. The coal tar pitch went through the carbonization process through the liquid, and it was confirmed that the crystallinity changed rapidly in the temperature range of 500 and 600 ℃, where the microstructure changed quickly. These results confirmed the close correlation between microstructure and crystallinity.

• Cross-Cultural Studies
• /
• v.52
• /
• pp.253-275
• /
• 2018

The concept of 'utopia' in Korea was formed in the early 20th century. 'There isn't in this world but good world' could be found using science and it was an ideal place for science to realize in the 1900s of Korea. Utopia was emphasized as an ideal world of fantasy in the 1920s. It was an ideological world wherein socialism was realized by a purposeful science. Utopia, conversely, was the history of scientific socialism defined as past example of communism that could not be implemented but was fancied. There were works suggesting that it was a dark dystopia such as Society after 800,000 years written by H.G. Wells or Artificial Worker by Young-hee Pak, but there were implied at the will of utopia.

• Korean Journal of Ecology and Environment
• /
• v.52 no.1
• /
• pp.65-70
• /
• 2019

A total of 23 individuals of glass eel (Anguilla japonica) were investigated from two estuarine barrages of the Nakdong River in 2016. It was observed that most individuals migrated through the eastern barrage, compared to the western. Individual numbers differed significantly along the corridor modification of the barrages; for example, the number of individuals was two to three times higher after the modification. These results indicate that modification of fish way and lock gate for has facilitated migration of glass eel, and our study potentially offers the operation strategy of estuarine barrage in order to induce more active migration of glass eel.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.5
• /
• pp.39-53
• /
• 2007

The purpose of this paper is the development of a compensation algorithm by which the interoperability of fingerprint recognition can be improved among various different fingerprint sensor. In order to compensate for the different characteristics of fingerprint sensor, an initial evaluation of the sensors using both the ink-stamped method and the flat artificial finger pattern method was undertaken. This paper proposes Common resolution method and Relative resolution method for compensating different resolution of fingerprint images captured by disparate sensors. Both methods can be applied to image-level and minutia-level. In order to compensate the direction of minutiae in minutia-level, Unit vector method is proposed. The EER of the proposed method was improved by average 64.8% better than before compensation. This paper will make a significant contribution to interoperability in the system integration using different sensors.