• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.34-41
• /
• 2004

The purpose of this paper is to look at the characteristics of surface finishing which is one of the form accuracies and to obtain the fundamental technical data from the process of machining with diamond tool through experiment and theoretical analysis. The experiments were conducted with domestic made ultra-precision machine and MCD.PCD tool, with aluminum alloyed material and brass being used for the work pieces. The goal of the size accuracy was set to 100nm. The most suitable tool nose radius and machining conditions were selected, and the variations of the surface roughness were observed using SEM method while machining the distance of up to 500km. These data were evaluated and they examined the variation of the machined surfaces while cutting up to 500km of machining distance. At the same time, the state for the wear of diamond tool nose was analyzed and carefully examined through the newest measuring device. Additionally, the characteristics of ultra-precision machining technology were studied through visual analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.24 no.6
• /
• pp.828-837
• /
• 2000

The purpose of this study was to evaluate the physical properties and the hand of bast/man made fiber mixed fabrics compared to linen. The mixed fabrics were made by rayon, polyester and modal fiber as warp yarn, and ramie, flax, rayon/flax and cotton/flax as weft yarn. The crease resistance, drape, tensile strength/extension, water absorbancy and warmth retention were measured for test fabrics. The mechanical properties were measured by Kawabata system, and the hand value was calculated by previously developed equation. The results obtained from this study were as follows: The crease resistance and drape properties of bast/man made fiber mixed fabrics were improved compared to those of linen. The tensile strength of polyester/bast fiber mixed fabrics increased compared to those of linen, but rayon/bast and modal/bast fiber mired fabrics decreased. The extension of all mixed fabrics was increased compared to that of linen. The rayon/ramie and modal/ramie mixed fabrics showed lower warmth retention than linen. The mixed fabrics used rayon and modal as warp yarn showed higher water absorbancy than linen. The Koshi and Hari hand value of all mixed fabrics showed lower than those of linen. Fukurami hand value showed little difference between mixed fabrics and linen. Shari, Kishimi, and Shinayakasa hand value of rayon/bast and modal/bast fiber mixed fabrics showed higher than those of linen.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.69-74
• /
• 2008

In this paper, a comfort evaluation system based on a product-focused process design (PFPD) has been proposed for high comforts interior seat covers. Correlations between comforts properties and physical/thermal properties of interior seat covers were examined by combining traditional regression analysis and data mining techniques. A skin sensorial comfort of leather samples was evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Soft', 'Sticky' and 'Elastic'. Thermo-physiological comfort properties of leather samples were evaluated by only human tactile sensation. The adjectives of leather car seat covers are 'Coolness to the touch' and 'Thermal and humid'. Skin sensorial comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Soft', 'Smooth', 'Voluminous' and 'Elastic'. Thermo-physiological comforts of cloth samples were evaluated by only human tactile sensation. The adjectives of cloth car seat covers are 'Coolness to the touch' and 'Thermal and humid'.

• Textile Coloration and Finishing
• /
• v.28 no.4
• /
• pp.280-289
• /
• 2016

Silica microgel was prepared by sol-gel process and then functional groups, epoxy group and ethoxy group, were introduced on the particle by coupling treatment with 3-glysidoxypropyltrimethoxysilane. The functional silica microgel(functional SiGel) formation was identified using FT-IR spectrometry. Phase stability for DMF solution of functional SiGel, PU resin and pigment was evaluated by Turbiscan Lab. And physical properties of artificial suede including hand values, morphology and dyeing fastness were investigated. The mean particle size and the specific surface area of the functional SiGel were $0.77{\mu}m$ and $380m^2/g$. Mixture containing the functional SiGel, PU resin and pigment was more stable than the functional SiGel-free mixed solution. Artificial suede prepared by the functional SiGel had appearance and feeling close to natural suede. The migration fastness, the solvent wicking fastness and rubbing fastness of the artificial suede were enhanced to 4~5 grades, 4~5 grades and 3~4 grades, respectively.

• Textile Coloration and Finishing
• /
• v.29 no.4
• /
• pp.202-210
• /
• 2017

In recent years, the water-based ink have been widely used in various industrial applications due to environmental problems. Dispersibility of the pigment for applications of the water-based ink is the one of the most important technical factors to produce uniform color products. Thus, in this study, the three-roll mill process was used to improve the dispersion of the water-based ink. The results indicated that the three-roll mill reduced the size of pigment particles in the ink more than 50%. In addition, the dispersant showed an important role to maintain the dispersion stability of the pigment in the water-based ink over 120 hours. We also confirmed the optimum contents of the ink stock solution, drying temperature and drying time by the colorimeter and colorfastness tests on produced PET synthetic suedes.

• Journal of Fashion Business
• /
• v.13 no.1
• /
• pp.82-90
• /
• 2009

This research was made to manufacture the fabric for interior uses by spinning a low melting mono 4 denier PET staple fiber with a soluble 1.4 denier fine PET fiber. The blended yarn has a thickness ranging from 10's to 14's, and the soluble PET fine fiber was dissolved to make a pore in the polymer. Thereby a snap property was decreased and a resilience property was improved to be suitable for a functional synthetic leather. In order to attain the optimum condition, a mechanical property according to fineness, and mixing ratio of low melting polymer, warp density, weft density and blending ratio, and a heat contraction ratio according to blending ratio were experimented. The warp density, 220 T/inch of fine denier PET and the weft density, 64 T/inch of thick denier PET were generated to 4/4 both twill weave fabric having constant tensile property and thickness.

• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.215-219
• /
• 1976

Anticoagulation therapy with Warfarin and Dipyridamole is useful after prosthetic heart valve replacement for the prevention of thromboembolic accidents. Here presented a case of right ovarian hematoma, 41 years old, female who has been already treated double valve replacement due to mitral insufficiency with 27 mm $Bj{\ddot{o}}rk-Shiley$ mitral, and 29 mm Hancock tricuspid valve successfully on 27th, April, 1976. Just after the operation, patient was treated the anticoagulation therapy with Dipyridamole 300 mg, and Heparin, and later switched to Warfarin 3.75 mg or 5 mg po, as the maintenance dose. Three and half months after the anticoagulation therapy, patient complained the lower abdominal pain and vaginal spotting and which revealed right ovarian hematoma due to ovulation, manifested due to anticoagulation therapy. Patient was discharged postoperative 15 th day with the maintenance dose 5 mg Warfarin and Dipyridamole 300mg po to maintain the prothrombin time 30%, after the uterus and both. ovaries and both adnexae are resected out for the prevention of the further hemorrhage of ovary.

• Journal of Chest Surgery
• /
• v.34 no.11
• /
• pp.870-874
• /
• 2001

Takayasu arteritis is a chronic non-specific inflammatory arteriopathy that involves primarily the first branches of aortic arch but may also affect the aorta and any of its primary branches. A characteristic trait of the disease is that most of the patients are young females of mainly Asian and South American origin. Recently, we experienced a rare case of Takayasu arteritis which showed a cord-like atresia of abdominal aorta just below renal arteries in 52-year-old woman. We performed a side to side bypass graft from descending thoracic aorta to abdominal aorta just above the aortic bifurcation with a 18mm PTFE(polytetrafluoroethylene) vascular graft. The postoperative course was uneventful. .

• Journal of Chest Surgery
• /
• v.35 no.8
• /
• pp.599-604
• /
• 2002

Acute or chronic aortic dissection may lead to the rupture, which is the major cause of death. A dissecting aneurysm of ascending aorta(Stanford type A dissection) can rupture into the superior vena cava producing a aortocaval fistula, which is rare, but has been reported mostly in the cases of abdominal aortic aneurysm. We report a case of 67-year-old man with type A chronic dissection and aortocaval fistula, presenting symptoms of superior vena syndrome. The preoperative diagnosis was composed of radiologic examinations, including computed tomography, magnetic resonance imaging angiography and aortography. The dissecting aneurysm was resected and replaced, and the aortocaval fistula was repaired under deep hypothermic circulatory arrest. The details are described here.

• Journal of Chest Surgery
• /
• v.38 no.3 s.248
• /
• pp.245-248
• /
• 2005

Drugs containing ergotamine are widely used in the treatment of migraine. Spastic vasoconstriction is one of the most serious side effects even with recommended dosage. We report a case of 63-year-old male with severe arterial occlusion of the upper limbs which might be related with vasospasm caused by ergotamine-containing medication because of migraine for f5 years. He was treated with bypass graft, sympathicotomy and heparin and prostaglandin E1 infusion. But dramatic clinical reversal of the vasospasm was obtained after withdrawal of ergotamine.