• Explosives and Blasting
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2017

It is very difficult to clearly define the damages caused by blasting-induced noise and vibration, because the damages depend on, besides the level of noise and vibration, the response of the object, environmental conditions, subjective feeling, and mental condition. Especially, it is more difficult when the fish is concerned, because that experimental approach is not easy and that we lack of the reasonable criterion for the acceptance level of noise and vibration. In Korea, the acceptance level for damage due to underwater noise is 140 dB re $1{\mu}Pa$, and the difference from the underwater background sound level is defined as more than 20 dB re $1{\mu}Pa$. It is however, appropriate for continuous noise not for transient sound. The authors compared the relationship between vibration velocity and underwater noise measured from the test blasting around Marphysa sanguinea farm. This paper presents the measurement results and suggestions the acceptance level for damage due to underwater noise from explosive blasting.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.145-157
• /
• 2008

Load transfer efficiency (LTE) reflects the structural performance of doweled and undoweled joints of Jointed Concrete Pavement (JCP). A 3-dimensional (3-D) model of JCP was built using ABAQUS software in this study. Three concrete slabs were placed on bonded sublayers composed of a base and subgrade. Spring elements were used to connect the adjacent slabs at joints. Different spring constants were input to the model to simulate different joint stiffness of the concrete pavement. The LTE of the joint increased with an increase of the spring constant. The effects of material properties and geometric shape on the behavior of JCP were analyzed using different elastic modulus and thickness of the slab and base in the modeling. The results showed the elastic modulus of the subgrade affected the behavior of the slab and LTE more than that of the base and the thickness of the slab and base. The effects of a negative temperature gradient on the behavior of the slab and LTE were more than that of positive and zero temperature gradients. Joints with low stiffness were more sensitive to the temperature gradient of the slab.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.4
• /
• pp.11-21
• /
• 2011

This paper proposes a method for decomposing a Hangul glyph of outline fonts into its initial, medial and final components using statistical-structural information. In a font family, the positions of components are statistically consistent and the stroke relationships of a Hangul character reflect its structure. First, we create the component histograms that accumulate the shapes and positions of the same components. Second, we make pixel clusters from character image based on pixel direction probabilities and extract the candidate strokes using position, direction, size of clusters and adjacencies between clusters. Finally, we find the best structural match between candidate strokes and predefined character model by relaxation labeling. The proposed method in this paper can be used for a study on formative characteristics of Hangul font, and for a font classification/retrieval system.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.1
• /
• pp.62-68
• /
• 2015

Supernumerary teeth (SNTs) refer to extra teeth over normal numbers. SNTs can influence adjacent teeth and structure. Therefore, it is important to find SNTs before they cause problems and to decide when to extract them. Etiology of SNTs has not exactly been found, but it has been proposed that genetic and environmental factors are associated. SNT appears as a single unit in most cases and multiple SNTs usually occur as a part of a syndrome. Non-syndromic multiple SNTs are rarely seen. This report is to document the occurrence of multiple supernumerary premolars in a father and his three sons. Heritage is an important factor in SNT development so familial history is important for early detection of SNT.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2132-2146
• /
• 1991

Extensive experiments were carried out to investigate the mass transfer and flow structures around a circular cylinder with annular fins in crossflow. The naphthalene sublimation method was employed to measure the circumferential and longitudinal variations of mass transfer from the circular cylinder between annular fins and H is the height of the fin from the cylinder surface. A remarkable enhancement of mass transfer due to the horseshoe vortices was observed near the corner junction between the annular fin and circular cylinder. The present results indicate that the local circumferential Sherwood number shows the higher values on the front stagnation point. The maximum augmentation of mass transfer rate at the center of cylinder is found near L/H-0.15 due to the separation bubble along the annular fins. The secondary flows, which are the corner vortices V2 and V3 near the end wall of the annular fin, are fairly predicted from the distributions of local Sherwood number in the spanwise direction. The average Sherwood number of overall surface at L/H=0.15 is larger 2.0 times than that of without annualr fins. The correlations of total average mass transfer rate with L/H and Re$_{L}$ can also be obtained.d.

• Applied Microscopy
• /
• v.20 no.2
• /
• pp.81-101
• /
• 1990

Toad bladder의 상피수송(上皮輸送)을 분석(分析)하기 위하여 동결치환(凍結置換) 및 동결절단법(凍結切斷法)을 적용(適用)하여 전자현미경(電子顯微鏡) 관찰(觀察)을 실시하였다. 방광(膀胱)의 점막층(粘膜層)은 과립성세포(顆粒性細胞), 미토콘드리아가 풍부한 세포, 점막분필세포(粘膜分泌細胞) 및 기저세포(基底細胞)등 4가지 세포로 구성되어 있었다. 과립성세포(顆粒性細胞)는 점막표면적의 대부분을 점유하며 $Na^+$ 수송(輸送)에 주요한 역할을 하고, 정단부(頂端部)의 세포질에는 다수의 과립이 분포하며 정단세포막(頂端細胞膜)은 microvilli type I로 배열되어 있고, 표면에 glycoprotein을 함유하는 세포외막(細胞外膜)이 관찰되었다. 대조적으로 미토콘드리아가 풍부한 세포는 세포질 전역에 걸쳐 다수의 미토콘드리아가 분포해 있으며 주요 기능은 $H^{+},\;K^{+}$ 및 $HCO_{3}^{-}$ 분필수송(分泌輸送)에 관여할 것으로 생각되며 이들 수송상피(輸送上皮)는 정단부가 견고연접(堅固連接)으로 둘러 싸이고 기저세포막(基底細胞膜)은 인접세포와 서로 분리되므로 상피세포의 극성이 유지되며 정단부(頂端部) 세포막과 기저세포막의 수송특성(輸送特性)은 각기 다르다고 생각된다. 따라서 두꺼비 방광(膀胱)에서 상피수송(上皮輸送)은 세포 통과수송 및 세포간 분류수송 경로를 나타내고 있다. 한편 세포막 투과성(透過性)의 조절과 관련하여 동결절단(凍結切斷) 전자현미경 관찰에 의하면 forskolin에 촉진된 정단부(頂端部) 세포막 투과성의 변화는 세포막내(細胞膜內) 입자(粒子)의 분포와 밀접한 관계를 가지는 것으로 보인다. 특히 과립성세포(顆粒性細胞)에서 집단으로 관찰되는 세포막내(細胞膜內) 입자(粒子)는 forskolin에 유도된 정단세포막(頂端細胞膜) 투과성의 변화를 나타내주는 것으로 사료되나 이의 기능적 의미에 대하여는 연구가 더욱 필요하다고 본다.

• Applied Microscopy
• /
• v.30 no.3
• /
• pp.255-264
• /
• 2000

The topographic correlation between the processes of photoreceptor cells and nerve cells in the pineal organ of catfish, Parasiluns asotus, was studied using 3D electron microscopy. Upon examination, one neuronal cell process was found to pass through the intertwined processes of the photoreceptor cells. Interestingly , we observed two photoreceptor processes interlock, after which two buds from one process penetrated the other. Synaptic ribbons were observed in the cytoplasm of the photoreceptor cella, especially near the neuronal process. Macrophages were occasionally found to be contact with the outer segments of the photoreceptor cells in the pineal lumen.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.85-95
• /
• 1996

The purpose of this paper Is to propose a dubbed signal time-synchroniztion technique based on the SOLA(Synchronized Over-Lap and Add) method which has been widely used to modify the time scale of speech signal. In broadcasting audio recording environments, the high degree of background noise requires dubbing process. Since the time difference between the original and the dubbed signal ranges about 200mili seconds, process is required to make the dubbed signal synchronize to the corresponding image. The proposed method finds he starting point of the dubbing signal using the short-time energy of the two signals. Thereafter, LPC cepstrum analysis and DTW(Dynamic Time Warping) process are applied to synchronize phoneme positions of the two signals. After determining the matched point by the minimum mean square error between orignal and dubbed LPC cepstrums, the SOLA method is applied to the dubbed signal, to maintain the consistency of the corresponding phase. Effectiveness of proposed method is verified by comparing the waveforms and the spectrograms of the original and the time synchronized dubbing signal.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.121-131
• /
• 2010

To effectively reduce PM10 generated in concourses and platforms of subway stations, a research is being conducted to find the PM10 source. The main source of PM10 in subway stations was PM10 generated in the main line tunnels, which was generated in proportion to the frequency of the train operation. Each amount of the PM10 generated when the train was operated once, was constant regardless of the time. On the assumption that the PM10 level in a tunnel of a line is a sum of newly generated amount of dust when the subway passes and the amount carried from the adjacent stations by the wind generated from the subway rolling stocks, the method which estimates the intensive PM10 occurring section was developed and applied to the 12 stations between Cheongdam and Jangseungbaegi in Seoul Subway Line 7.

• Journal of Korea Water Resources Association
• /
• v.40 no.4
• /
• pp.313-324
• /
• 2007

An irregular cell-based numerical model was developed to analyze underground space flooding. In this model, the flow characteristics in underground space were computed by link-node system. Also, the model can simulate the underground flood flow related to the influence of stairs and wall-structures. Empirical discharge formula were introduced to analyze weir-type flow for shopping mall, and channel-type flow for subway railroad respectively. The simulated results matched in reasonable range compared with the observed depth. The dual-drainage inundation analysis model and the underground space flood analysis model were integrated using visual basic application of ArcGIS system. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.