• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.689-697
• /
• 1998

In this work, we studied the equilibrium, rate and rate determining step of uranium adsorption on RGP resins of MR type prepared by varying the degree of crosslinking and the amount of diluent. The equilibrium of uranium adsorption on RGP resins were well explained by Frendrich isotherm as well as Langmuir isotherm model. The amount of adsorption and adsorption rate increase with the adsorption temperature. The heat of the adsorption was 11 kcal/mol. The adsorption rates of uranium on RGP resins were decreased in the order of RGP-10(50)>RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0(50) and RGP-2(75)>RGP-2(100)>RGP-2(50)>RGP-2(30)>RGP-2(0). The diffusion resistance of uranium into RGP resin increased as follows; molecular diffusion < pore diffusion < surface diffusion. On the other hand, the surface diffusion was more dominative than the pore diffusion in intraparticle region. Thus, this result indicates that the adsorption mechanism of uranium on RGP resins is intraparticle diffusion controlled.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.4
• /
• pp.248-253
• /
• 1991

This study examines the effect of submergence on transformations of inorganic phosphorus and the relation between fractions of inorganic phosphorus and adsorbed phosphorus in Gangseo (paddy soil), Yesan (non-cultivated soil), and Jungdong soil (upland soil). The soils were submerged with glucose sol'n at $28^{\circ}C$ for 17 days. After, the soils were incubated with phosphate solution at $25^{\circ}C$ for 24 hours. The seguential fractionation of inorganic phosphorus and of iron were conducted to investigate transformations of them. Results obtained are as follows; 1. By submergence, Bray I-P were decreased from 53mgP/kg to 48mgP/kg in Gangseo, from 3mgP/kg to 1mgP/kg in Yesan, and from 120mgP/kg to 56mgP/kg in Jungdong soil. 2. $NH_4F$ extractable P was dominant fraction of adsorbed P. It was transformed into NaOH extractable P by submergence in Jungdong soil. 3. Dithionite-citrate-bicarbonate extractable iron (crystalline Fe) was transformed to oxalate extractable iron (amorphous Fe) by submergence in Yesan soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.55-60
• /
• 1977

In order to study the availability of soil P and applied P to rice plant under water-logged system, a pot experiment with five soils having different levels of available P (24, 64, 100, 144 and 231 ppm) under four levels of applied P (0, 30, 60 and 90 ppm) was conducted. The availability of P was measured in terms of plant performance and the behaviors of P in soils were studied through the fractionation of various forms of P and by measuring the adsorption and desorption characteristics. The results are summarized us following. 1. The rice plant responded to applied P in the soils containing less than 144 ppm of available P as measured by Lancaster's method in terms of number of tillers in early growth stages. However, when the response of rice plant to applied P was evaluated in terms of grain yield there was no response even in the soil containing 24 ppm of available P. 2. Applied P was fixed as Al-P at the early stages and converted into Fe-P at later stages. 3. The P adsorption maxima of soils measured by Langmuir's isotherm ranged from 70 to 100mg/100g. No relationships between the level of available P and P adsorption maxima were observed. 4. There was a trend that the higher the level of available P, the higher the release of water soluble p. 5. The reduction of soil increased the level of available P by the factor of 1.8 times of air dried soils.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.616-620
• /
• 2008

The aim of this study was to investigate the influence of phosphate on the adhesion of Escherichia coli to porous media. Column experiments were performed to examine the effect of phosphate on bacterial adhesion to quartz sand and iron-coated sand. Results showed that bacterial mass recovery in quartz sand decreased from 74.5 to 35.4% as phosphate concentration increased from 0 to 16 mg/L. This indicated that bacterial adhesion to quartz sand was enhanced with increasing phosphate concentration. This phenomenon is due to the increase of ionic strength. In contrast, the mass recovery in the coated sand increased from 2.9 to 26.0% as phosphate concentration increased. This indicated that bacterial adhesion to the coated sand was reduced with increasing phosphate concentration, due to the preoccupation of favorable adsorption sites and competitive adsorption by phosphate.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.5
• /
• pp.1222-1228
• /
• 2020

The adsorption and ion exchange properties of tin phosphate were studied in an aqueous solution of KCl, varing the pH and metal ion concentration in the solution. The data were explained on the basis of chemical equilibrium. Tin phosphate behaved as an acidic ion exchanger and had an adsorption selectivity toward the bivalent transition metal ions in the following order : Cu⁺² > Co⁺² > Ni⁺². As in the case of a weekly acidic exchanger, the change in hydration of metal ions played the dominant role in determining the selectivity of tin phosphate. In all cases the extent of adsorption increased with an increase in temperature and concentration. The apperance of irregular kinks in the titration curves justified the presence of several exchangeable adsorption sites with different pKa values.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.79-85
• /
• 2011

A study on characteristics for removal of arsenic ion using phosphorylated pine needles was performed. The surface condition of phosphorylated pine needles was confirmed by FT-IR, SEM(Scanning Electron Microscopy) and EDX(Energy Dispersive X-ray). The removal rate of arsenic ion was the highest as about 98% at pH 7. Most absorption for arsenic ion was also completed within 30min and decreased with time and pH of arsenic solution from 6.5 to 2.4.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.04a
• /
• pp.35-36
• /
• 1992

화학반응이 주로 고온에서 일어나기 때문에 polymer membrane의 화학반응에의 적용은 거의 없었으며, 연구의 대부분은 열적 안정성이 좋은 inorganic membrane reactor에 대하여 이루어져 왔다. 산 및 산화환원 촉매로써의 12-텅스토인산은 반응물의 종류에 따라 특이한 흡착 특성을 보이며, 헤테로폴리산만이 지니는 특징적인 surface, bulk 특성 때문에 바능물의 종류에 따라 반응은 촉매의 surface and/or bulk에서 일어난다. 무기 축합산인 12-텅스토인산이 지니는 또 하나의 특징은 물, 알콜, ether 같이 산소를 포함하는 organic solvent에 매우 잘 녹는다는 사실이다.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.175-182
• /
• 1995

Styrene-Maleic anhydride copolymer (SMA) was prepared by the radical copolmerization of styrene and maleic anhydride using ${\alpha}-{\alpha}'$ azobis(isobutyronitrile) as an initiatrr. SMA was further reacted with m-amino phenol to obtain aminophenol-substituted SMR (mSMA). Sulfonated SMA and mSMA were also prepared by the reaction of copolymers with sulfuric acid The copolyniers were characterized by infrared spectroscopy. It was found from the results of elemental analysis that the substitution degree of aminophenol in the mSMR is 44% and the degree is lowered to 35% after sulfonation. The percentage of copolymers adsorbed on the surface of cement particles was increased with a decrease of added copolymers. While, the arnourit of sulfonated SMA absorbed on the surface of cement particles was larger than that of the sulfonated mSMA The copolymers synthesized in this study are probably expected as a high range water reducer for coiicxte.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.473-476
• /
• 1998

활성탄소는 입자내 공극이 잘 발달된 무정형 탄소로서 흡착성 및 촉매성이 뛰어나 대기오염의 주범인 유독성 배기가스의 흡착이나 폐수처리, 정수처리 등에 널리 사용되고 있다. 환성탄소 제조공정은 크게 보아 탄화 및 활성화 공정으로 나눌 수 있으며 활성화 방법에 따라 화학적 활성법과 물리적 가스 활성법으로 나눌 수 있다. 가스 활성법은 고온에서 수증기나 $CO_2$,O$_2$ 그 외의 산화성가스를 char와 접촉시키는 방법이고, 화학적 활성법은 염화아연, 인산, 수산화칼륨등과 같은 탈수, 산화, 침식성이 큰 화학약품으로 탄소질을 침식시키는 방법이다. (중략)

• Journal of Wetlands Research
• /
• v.20 no.3
• /
• pp.263-271
• /
• 2018

In this study, we analyzed the removal efficiency of ammonia nitrogen and phosphate dependant on the column depths using various absorbents such as zeolite silica sand, and activated carbon through the column test. In addition, we analyzed electrochemical adsorption behaviors of ammonia nitrogen and phosphate through the quantum mechanical calculation based on density functional theory calculation. Experimental results represent the removal efficiency of ammonia nitrogen and phosphate are zeolite > activated carbon > silica sand, and activated carbon > zeolite > silica sand, respectively. Zeolite shows high adsorption property for ammonia nitrogen over 90%, regardless of the column depth, while activated carbon exhibits high adsorption property for both ammonia nitrogen and phosphate as the column depth for filter media increases. Theoretical findings using DFT calculation for the adsorption behaviors of adsorbents (activated carbon and silica sand) and nutrients ($PO_4{^{3-}}$, $NH_4{^{+}}$) show that activated carbon represented narrower HOMO-LUMO band gap with high adsorption energy, and even more favorable environment for electron adsorption than silica sand, which leads to the effective removal of nutrients.