• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.266-267
• /
• 2012

아연계 합금도금강판은 내식성이 향상되는 반면 아연 이외의 원소 성분에 의해 고온다습에서 변색되기 쉽기 때문에 이를 억제하기 위한 후처리 기술이 필요하다. 또한, 아연계 합금도금 강판이 자동차 부품으로 적용되기 위해서는 변색 억제를 위해 처리한 후처리제가 쉽게 제거되어 인산염처리 공정에서 도금 표면에 인산염결정이 용이하게 형성되어야 한다. 본 연구에서는 건식공정으로 제작된 아연계 합금도금 강판에 우레탄계 알칼리 후처리제를 도포하고, 고온다습 환경에서의 변색 억제 특성과 적정 부착량에서의 인산염처리 및 전착도장 특성에 대해 평가하였다. 두 형태의 후처리제는 건식 아연계 합금도금 강판에 도포 직후 표면에 간섭색을 나타내었으며, 첨가제를 통해 간섭색 제어가 가능하였다. 또한, 두 형태의 후처리제 모두가 고온다습 환경에서 무처리 강판에 비교하여 월등히 우수한 변색 억제 효과를 보였으며, 인산염처리 및 전착도장이 양호하게 얻어지는 것을 알 수 있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.78-78
• /
• 2018

전기 아연도금은 철강의 내식성을 향상시키기 위한 희생양극으로 사용되어 왔다. 이러한 아연 도금층의 내식성은 그 아연에 의하여 부식으로부터 보호받는 철강 소재의 수명과 직결됨에 따라 아연 도금층의 성능 특히 부식저항성을 높이는 연구는 소재 수명 뿐만이라 성능의 유지하는데 있어서 매우 중요하다. 본 연구에서는 전기 아연 도금층에 표면에너지가 낮은 물질인 테플론을 얇게 코팅함으로써 발수성 표면을 구현하였다. 발수성 표면은 물에 대한 젖음성이 매우 낮기 때문에 부식 저항성이 높은 것으로 알려져 있는데, 이는 표면의 거칠기를 제어함으로써 그 효과를 극대화 할 수 있다. 본 연구에서는 특히 전기 아연 도금의 후처리로 알려진 인산염 처리를 이용하여 전기 아연 도금층의 표면형상 구조를 제어하였다. 그리고 그 표면에 테플론을 코팅함으로써 초발수 성질을 구현하였고, 이를 통해 아연 도금층의 내식성 향상에 대하여 분석하였다. 그 결과, 인산염처리에 의하여 표면형상의 구조가 거칠어질수록 테플론 코팅 후 접촉각과 물방울의 이동성은 증가하였다. 이는 표면형상에 의해서 공기층이 물방울 아래에 고립되어 있다는 것을 의미하고, 이러한 공기층으로 인하여 아연 도금층의 내식성은 크게 증가하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.603-610
• /
• 2017

Steel used for various industrial fields including ammunition is vulnerable to corrosion so surface treatments are required such as plating, painting and chemical conversion coating. Zinc phosphate, used for ammunition manufacturing, is used to stick the stable compound on the surface by chemical conversion of metal. The quality of phosphate coating depends on many factors such as total acidity and iron content. In this study, we studied the influence of total acidity and iron content on coating weight and corrosion resistance of phosphate coating. The surface structure of the coating becomes dense and corrosion resistance is improved with increasing iron content. However, total acidity influences only the thickness and phosphate coating weight. In conclusion, this study suggests the optimal range of total acidity and iron content to manufacture the ammunition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.528-537
• /
• 1999

The purpose of this study was to analyze and compare the bond strengths between stainless steel plate and zinc phosphate cement, polycarboxylate cement and glass ionomer cement, which are frequently used for cementation of stainless steel crowns. Three cementing materials were glued to the poles standing above stainless steel plate, bovine teeth, light cured glass ionomer restorative material and amalgam. And the tensile bond strengths between them were measured with universal testing machine and the results were statistically processed using ANOVA and Student t-test. The obtained results were as follows : 1. On stainless steel plate, glass ionomer cement and polycarboxylate cement showed higher tensile bond strengths compared to zinc phosphate cement, with no significant difference between the former two. 2. On the surface of bovine teeth and glass ionomer restorative material, glass ionomer cement showed highest bond strength, followed by polycarboxylate cement and zinc phosphate cement in order. 3. For amalgam restoration, polycarboxylate cement and glass ionomer cement showed higher tensile bond strengths than zinc phosphate cement, with no significant difference between the former two.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.59-65
• /
• 2004

Interactions of phosphorus and zinc in soils are important to determine the availability of the elements because those elements are closely related in the agricultural environment. The objective of this study was to investigate the interactions of P and Zn using desorption quantity (Q)-intensily(I) isotherms. Physically and chemically different soils, acidic Egan, acidic sandy Egeland, calcareous Glenham, and neutral Maddock, were used. The soils were enriched with different concentrations of P and Zn as $KH_2PO_4$ and $ZnSO_4$ solutions, respectively. Zinc enrichments affected availability of P in the Egan soil, which contained higher amounts of clay, organic matter, and exchangeable Fe than the other soils tested. After Zn enrichments, the pH drastically decreased in Egeland sandy soil, not changed in the calcarious Glenham soil, and slightly decreased in Egan and Maddock soil systems. The values of $Q_{max}$ and $I_0$ of phosphorus decreased with increasing Zn concentrations enriched in all soils, the changes of those values did not influence the P buffering power, |$BP_o$| values, in most soils. The influences of P treatment on Zn availability were varied. The values of Zn buffering capacity, $BC_{Zn}$, were lowest in the Egeland soil that had the lowest soil pH, amounts of clay minerals, organic matter, CEC, and exchangeable Fe, and were highest in the calcareous Glenham soil. The $BC_{Zn}$ values ranged from 202 to 4480. With P application, the changes of $BC_{Zn}$ values were more affected by the changes of soil solution Zn contents (I) than the changes of DTPA extractable Zn contents(Q). The change of Q and I values was found to be dependent upon soil properties, especially, soil pH.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.4
• /
• pp.189-194
• /
• 1975

On a newly reclaimed acidic soil, investigation was made to find out the influence of lime and P application at a largeg uantity on the uptake of Zn by corn and its distribution among the leaves, under afactorial combination with two levels of Zn, lime, and P. The results are summarized as following. 1. The application of lime for neutralization of soil significantly reduced the uptake of Zn by corn. 2. Liberal doses of P (5% of P absorption coefficient of soil; 500ppm) applied before sowing did not influence the uptake of Zn. 3. The concentration of Zn in bottom leaves better reflected the Zn uptake status of corn than the upper leaves. The concentration of Zn in bottom leaves responded clearly to the treatments of lime and Zn, while those of upper leaves tended to be constant unresponding to application of lime and Zn. 4. On the present experimental condition, the yield of corn was increased with the increase of P application. But the concentration of P in plant tissue remained constant under different P levels. 5. Application of lime (calcium hydroxide) on low P plots, depressed the yield of corn significantly. It was speculated that the lime applied at large dose made the applied P less available to corn.

• The Journal of the Korean dental association
• /
• v.27 no.10 s.245
• /
• pp.913-922
• /
• 1989

• Clean Technology
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2013

The zinc phosphate-coated mica (ZP/mica) pigments were prepared using phosphoric acid, zinc nitrate and mica as starting materials, and used as anticorrosive pigments. The scanning electron microscopy (SEM) and x-ray diffraction (XRD) techniques were used to observe the morphology and crystal structure of prepared pigments. The prepared pigments were incorporated into an epoxy binder to prepare coating and the corrosion inhibition performance of the pigments was evaluated using electrochemical impedance spectroscopy (EIS). It was found that the anticorrosive performance of the ZP/mica pigment prepared at $70^{\circ}C$ was the better than that prepared at $20^{\circ}C$. The formation of ZnO, in addition to $Zn_3(PO_4)_2{\cdot}2H_2O$, was observed on ZP/mica pigment prepared at $70^{\circ}C$. The excellent anticorrosive performance of ZP/mica pigment could be ascribed to the synergistic effect with electrochemical anticorrosive mechanism from zinc compounds on mica and barrier anticorrosive mechanism from lamellar mica.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.149-149
• /
• 2013

본 연구에서는 선박, 자동차 및 가전 제품용 표면처리 강재 및 아연도금 소재를 대상으로 외관도장의 특성향상 방안에 대하여 검토하였다. 특히, 도장의 밀착성과 내충격성 향상을 위하여 제품의 소재특성으로부터 물리적 화학적 전처리와 인산염 피막처리 및 최종도장에 이르기까지 각 공정이 도장 특성에 미치는 영향을 분석하였다. 각 공정조건에 따라 처리한 도장특성 평가 결과에 의하면, 인산염 피막의 균일-미세한 분포가 도장의 밀착성과 내충격성 향상에 주요한 영향을 미친 것으로 확인되었다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.2
• /
• pp.77-81
• /
• 1976

On a newly reclaimed acidic soil, investigation was made to find out the influence of lime and phosphorus application by a large quantity on the uptake of zinc by corn and its distribution in leaves and stem, under a factorial combination with two levels of zinc, lime, and phosphorus with three kinds of soil texture. The results are summarized as following, 1. The concentration of zinc in stem reflected the zinc uptake status of corn better than the leaves. The concentration of zinc in stem responded clearly to the treatments of lime and zinc, while those of leaves tended to be constant regardless of the application of lime and zinc. 2. The zinc uptake was not improved by compost application though it increased the yield of corn significantly. 3. The application of lime for neutralization of soil with low level of phosphorus application affected the yield of dry matter differently among different soils, slight increase on sandy loam soil, slight decrease on loam soil, and significant decrease on clay loam soil. The yield decrease on clay soil is considered to be due to the decreased availability of applied phosphorus owing to the large amount of lime applied.