• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.391-394
• /
• 2014

본 논문에서는 DSP(TMS320F28335)를 이용하는 홀센서 타입의 다극 BLDC 전동기의 벡터 구동을 위한 회전자의 절대위치를 결정하는 방법을 소개하고, 기존 방법의 문제점을 보완하기 위한 알고리즘을 구현 한다. 모터의 각 상에 원하는 교류 전류를 공급하기 위한 전압원 인버터의 스위칭 방법으로 공간벡터 변조방식을 이용하였다. 또한 속도 영역의 증가를 위해 약계자 제어 기법을 사용 하였다. 제안된 알고리즘을 검증하기 위해 보상 전후의 계산된 Iqe, Ide 및 상전류를 비교한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.207-209
• /
• 2019

This paper proposes a grid-tied photovoltaic (PV) system, consisting of Voltage-fed dual-active-bridge (DAB) dc-dc converter with single phase inverter. The proposed converter allows a small dc-link capacitor, so that system reliability can be improved by replacing electrolytic capacitors with film capacitors. The double line frequency free maximum power point tracking (MPPT) is also realized in the proposed converter by using Ripple Correlation method. First of all, to eliminate the double line frequency ripple which influence the reduction of DC source capacitance, control is developed. Then, a designing of Current control in DQ frame is analyzed and to fulfill the international harmonics standards such as IEEE 519 and P1547, $3^{rd}$ harmonic in the grid is directly compensated by the feedforward terms generated by the PR controller with the grid current in stationary frame to achieve desire Total Harmonic Distortion (THD). 5-kW PV converter and inverter module with a small dc-link film capacitor was built in the laboratory with the proposed control and MPPT algorithm. Experimental results are given to validate the converter performance.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.169-180
• /
• 2019

Grid codes for grid-connected inverters are essential considerations for bulk grid systems. In particular, a low-voltage ride-through (LVRT) function, which can contribute to the grid system's stabilization with the occurrence of voltage sag, is required by such inverters. However, when the grid voltage is under zero-voltage condition due to a grid accident, a zero-voltage ride-through (ZVRT) function is required. Grid-connected inverters typically have phase-locked loop (PLL) control to synchronize the phase of the grid voltage with that of the inverter output. In this study, the LVRT regulations of Germany, the United States, and Japan are analyzed. Then, three major PLL methods of grid-connected single-phase inverters, namely, notch filter-PLL, dq-PLL using an active power filter, and second-order generalized integrator-PLL, are reviewed. The proposed PLL method, which controls inverter output under ZVRT condition, is suggested. The proposed PLL operates better than the three major PLL methods under ZVRT condition in the simulation and experimental tests.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.92-99
• /
• 2022

Due to space and geographical constraints, the power source may be located outside the island area, resulting in the considerable length of transmission line. In these cases, when an active power is transmitted, unexpected reactive power is generated at a point of common coupling (PCC). Unlike the power transmitted from the power generation source, the reactive power adversely affects the system. This study proposes a new algorithm that controls reactive power at PCC. Causes of reactive power errors are separated into parallel and series components, which allows the algorithm to compensate the reactive current of the inverter output and control reactive power at the PCC through calculations from the impedance, voltage, and current. The proposed algorithm has economic advantages by controlling the reactive power with the inverter of the power source itself, and can flexibly control power against voltage and output variations. Through the simulation, the algorithm was verified by implementing a power source of 3 [kVA] capacity connected to the low voltage system and of 5 [MVA] capacity connected to the extra-high voltage system. Furthermore, a power source of 3 [kVA] capacity inverter is configured and connected to a mock grid, then confirmed through experiments.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.117-125
• /
• 2007

연료전지 발전시스템에서는 DC-DC 승압용 컨버터와 DC-AC 인버터가 필요하다. 그러므로 본 논문에서는 연료전지의 전압을 380[VDC]로 승압하기 위한 절연형 DC-DC 컨버터와 단상 220[VAC]로 변환하기 위한 LC필터를 가진 PWM 인버터로 구성된 전력변환장치를 제안하였다. 특히 제안한 연료전지 시스템용 고효율 DC-DC 컨버터는 위상천이 PWM 제어법을 이용하여 부분 공진에 의한 ZVS를 실현하였으며, 일정 스위칭 주파수화 및 스위치의 스위칭 손실, 피크 전압과 전류를 저감시켰다. 그리고, 정류회로에 2개의 인덕터를 첨가하여 리플성분이 저감된 직류전압과 전류를 부하측에 안정하게 공급할 수 있었다. 또한, 넓은 출력 전압 조정에도 효율을 92[%]정도 얻을 수 있다. 이상과 같이 결과는 시뮬레이션과 실험을 통하여 그 타당성을 확인하였다.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.312-321
• /
• 2013

In this paper, high efficiency control method for flyback inverter with synchronous rectifier(SR) based on photovoltaic AC modules is proposed. In this control method, the operation of SR is classified according to the voltage spike across main switch SP. When the voltage spike across SP is lower than the rating voltage of SP, the operation of active clamp circuit is interrupted for reducing the switching loss of auxiliary switch. In this time, the SR is operated for soft-switching of SP. When the voltage spike across Sp is higher than the rating voltage of SP, the operation of active circuit is activated for reducing the voltage spike. The SR is operated for reducing the conduction loss of secondary output diode. Thus, a switching loss of the main switch can be reduced in low power region, and weighted-efficiency can be improved. A theoretical analysis and the design principle of the proposed method are provided. And validity is confirmed through simulation and experimental results.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.809-815
• /
• 2018

Distributed generations (DGs) using renewable energy resources in power systems have been widely integrated, and many of these DGs have intermittency. DGs can significantly affect the overall voltage profile of the system through the reactive power control for a voltage support. Therefore, in the planning stage of the optimal operation and dispatch of voltage regulation devices, DGs' hosting capacity with the reactive power control scheme should be considered. In this paper, we model the IEEE 34-bus test feeder, including all essential equipment. An optimization method is utilized to determine the optimal siting and operation of the voltage regulation devices in the presence of DGs with reactive power control scheme. Finally, we compare the optimal results of the each case to analyze the relationship among the hosting capacity of the DGs and voltage regulation devices operation.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.306-314
• /
• 2012

In case of the conventional DC-AC inverter using two DC-DC converters with unipolar output capacitor voltages, for generating the AC output voltage, the output capacitor voltages of its each DC-DC converter must be higher than the DC input voltage. To solve this problem, this paper proposes a single-phase DC-AC inverter using two embedded Z-source converters with bipolar output capacitor voltages. The proposed inverter is composed of two embedded Z-source converters with common DC source and output AC load. The AC output voltage is obtained by the difference of the output capacitor voltages of each converter. Though the output capacitor voltage of converter is relatively low compared to the conventional method, it can be obtained the same AC output voltage. Moreover, by controlling asymmetrically the output capacitor voltage, the AC output voltage of the proposed system is higher than the DC input voltage. To verify the validity of the proposed system, a DSP(TMS320F28335) based single-phase embedded Z-source DC-AC inverter was made and the PSIM simulation was performed under the condition of the DC source 38V. As controlled symmetrically and asymmetrically the output capacitor voltages of each converter, the proposed inverter could produce the AC output voltage with sinusoidal waveform. Particularly, in case of asymmetric control, a higher AC output voltage was obtained. Finally, the efficiency of the proposed system was measured as 95% and 97% respectively in case of symmetric and asymmetric control.

• 전기전자학회논문지
• /
• 제22권2호
• /
• pp.258-265
• /
• 2018

본 논문은 단상 유도전동기의 기동 시 발생하는 기동전류를 분석하고 이를 저감하기 위한 알고리즘을 제안한다. 일반적으로 단상 유도전동기는 구조적인 특성으로 인해 기동토크를 발생시킬 수 있는 별도의 기동장치가 요구된다. 본 논문에서 사용되고 있는 방법은 커패시터-기동/커패시터-운전 방식이며 타 방식 대비 기동토크가 크고 운전효율이 높은 특성이 있다. 하지만 초기 기동 시 약 5~6배에 해당되는 돌입전류가 발생하며 이로 인한 초저온 냉동고 기동 소자와 주변기기들의 소손 및 수명 저하의 원인이 된다. 기동 시 발생하는 돌입전류를 저감하기 위하여 가상 dq모델 기반의 전류제어 알고리즘을 적용하여 기동 전류를 제한하고, 정격운전에 도달 시 상용전원과 동일한 운전조건으로 전환하기 위한 알고리즘을 실험을 통하여 그 타당성을 검증한다.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.630-637
• /
• 2018

모터제어장치(MCU)는 높은 전압을 공급하기 위해 인버터 앞 단에 승압용 컨버터를 사용한다. 승압 컨버터는 높은 출력전압을 생성하기 때문에 내압이 높은 출력 커패시터가 필요하여 커패시터의 비용이 증가하게 된다. 이를 해결하기 위해 출력 커패시터의 작동 전압을 낮출 수 있는 승압 컨버터 구조를 제시한다. 제안된 컨버터의 기본 특성은 기존의 부스트 컨버터와 유사하며, 출력 커패시터와 입력 배터리를 직렬로 연결하는 출력 단자의 구조적 차이가 있다. 이러한 출력단 회로 구조에 의해 출력 커패시터의 동작 전압은 기존 승압 컨버터 보다 낮아진다. 이론적 분석, 시뮬레이션, 실험을 통해 기존 부스트 컨버터와 비교하고 타당성과 성능을 검증한다.