• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.67-69
• /
• 2017

본 논문에서는 철도차량용 매입형 영구자석 동기전동기의 저속영역에서 구동을 위해 센서리스 제어 기법을 적용하였다. 저속영역에서 센서리스 제어는 회전하는 전동기에 연속적인 고주파 신호를 인가하고 그 신호에 대한 응답을 이용한다. 매입형 영구자석 동기전동기의 회전자 인덕턴스 변화와 자기적 돌극성을 이용하므로 특정 전동기에 대해 우수한 성능을 나타낸다. 따라서 본 논문에서는 동기좌표계 d축 전압에 정현파 신호와 구형파 신호를 주입하여 두 방식에 대한 결과를 시뮬레이션을 통해 분석하였다.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.388-389
• /
• 2011

본 논문에서는 서버용 전원 장치의 DC-DC단에 사용되는 디지털 전압 모드 제어기를 설계한다. 서버용 전원 장치는 2차 측에 고전류가 흐르는 사양으로 인하여 부하 전류에 따라 출력 인덕턴스 변화를 가지게 되며, hold-up time 규제를 만족하기 위하여 입력 전압의 변동 범위를 가진다. 이와 같은 조건은 제어기를 설계하는데 제약을 작용하게 되어 고정 이득을 가지는 방식에서는 최적화된 부하 변동 특성을 얻기 힘들다. 이와 같은 문제점을 해결하기 위하여 제어기의 이득 조정 기법을 제안하고 실험을 통하여 검증한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.832_833
• /
• 2009

본 연구는 과거에 개발 되었었던 보조 선로 리액터를 구비한 초전도 한류기에 대한 것이다. 과거의 연구에서는 BSCCO선재와 YBCO coated condcutor (YBCO CC) 선재를 사용하여 실험적으로 한류특성에 대하서 연구 하였다 [1]. BSCCO 선재는 유도형으로 권선되어 정상 시에 저항은 작지만 인덕턴스 성분이 존재하는 보조 선로 리액터의 역할을 수행하였고 YBCO CC 선재는 무유도형으로 권선되어 스위치의 역할을 수행하였다. 두 개의 권선은 병렬로 연결되어 정상 시에는 전류가 YBCO CC 선재로 통전되다가 사고가 발생하면 YBCO CC 선재의 저항으로 인해서 BSCCO 선재로 통전되는 형태로 동작하였다. 본 연구에서는 BSCCO 선재의 보조 선로 리액터 부분을 초전도체가 아니라 일반 상전도체를 적용하여 스위치와 보조 선로 리액터의 조합에 변화를 주면서 한류 특성에 대한 시뮬레이션을 수행하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.844_845
• /
• 2009

Inductance and back EMF are important parameters in characteristic analysis of brushless motor. Inductance is constant value in surface permanent magnet type brushless motor. But it is change depending on the position of the rotor in interior permanent magnet type brushless motor. So this paper is considering for change inductance in characteristic analysis of brushless motor. Characteristic analysis is executed by the method that three-phase bipolar 120 degree commutation drive type.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.10
• /
• pp.1038-1044
• /
• 2009

In this study, vibrations of an electric motor are analyzed when the motor has the interaction between mechanical and electromagnetic behaviors. For this vibration analysis a 3-phase 8-pole brushless DC motor is selected. Vibrations of the motor are influenced by coupled electromechanical characteristics. The variation of air-gap induced by vibration has an influence on the inductance of the motor coil. To analyze dynamic characteristics of the rotor, we studied inductance by the variation of an air-gap. After obtaining the kinetic, potential and magnetic energies for the motor, the equations of motion are derived by using Lagrange's equation. By applying the Newmark time integration method to the equations, the dynamic responses for the displacements and currents are computed.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.972-975
• /
• 2004

This paper presents a simulation results of sensorless control of Switched Reluctance Motor(SRM) using neural network. The basic algorithm of this scheme is based on the flux linkage characteristic according to the phase current and the rotor position. A sufficient simulation data was used for neural network training. Through measurement of the phase flux linkage and phase currents the neural network is able to estimate the rotor position. The simulation result shows some good results, and possibility of this algorithm.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.586-591
• /
• 2020

An interleaved current-fed high step-up DC-DC converter is proposed. Besides high voltage gain, a low ripple input current is achieved by adopting interleaving operation. Moreover, soft-switching characteristic of the proposed converter reduces switching losses of active power switches and raise the conversion efficiency. The reverse-recovery problem of output rectifiers is also alleviated by controlling the current changing rates of diodes by utilizing the leakage inductances of transformers. Experimental results obtained on a 200W prototype are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.636-639
• /
• 2008

The paper deals with the improvement of various characteristics of antenna for VHF mobile handset. In the general case, $1/4{\lambda}$ monopole and helical antenna are used for VHF mobile handset. However, various characteristics of antenna have different result for effect of hand. Especially, radiation efficient is reduced about several dB. In this paper, characteristics of loaded helical antenna have been evaluated. And we propose a method to improve a radiation efficient of antenna consider with hand effect.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.156-159
• /
• 2001

This Paper analysis variable characteristics of inductance profiles and basic magnetic fields for Switched Reluctance Motors(SRM). The varying Inductance and flux linkage on operating control condition are very important for developing control algorithm and SRM accurate drive system. Therefore, we have analytical model for varying inductance and flux linkage with simulation and experimental mothed, and to find an analytical expression for the SRM coenergy. There are shown some good results that comparison of simulated and analytical inductance, flux linkage and current waves.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.171-171
• /
• 1999

In case of field weakening region torque is directly affected by flux. In this region the flux reference is decreased inversely proportional to the rotor speed. As the flux is decreased the magnetizing inductance is normally increased. The increased magnetizing inductance limited voltage for controlling current. In this paper, measuring q axis voltage in field weakening region magnetizing inductance in flux calculating can be readjusted. Computer simulation and experiment results demonstrate the efficacy of the proposed method. Proposed algorithm is expected to the application of the adjustable drive system in the spinning and weaving field.