• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.395-402
• /
• 2010

The seriousness of a traffic accident appears relatively higher on the curve sections compared with the straight sections due to a change in speed caused by a change in the driver's sight. In particular, the visual distortion phenomenon, one of the dangerous factors taking place on the curve sections, appears different according to the road's geometric design. Although it is a genuinely principal design factor which should be necessarily considered in designing a road, the previous researches on establishing the design standards for it have been insufficiently conducted. As a result, the establishment of the road design standards for the curve sections considering the sight distortion phenomenon is desperately required. This research examined the previous researches on the driver's behaviors, the driver's sight characteristics and the perceived curve radius on the curve sections, and developed the theoretical model of perceived curve radius to which a mathematical technique is applied in consideration of the visual distortion phenomenon on the two-lane curve sections in a local area. In addition, after the theoretical visual distortion was calculated on the basis of the theoretical model of perceived curve radius, the range of error on the theoretical recognition radius model formula was verified through comparing it with the previous researches' experiential visual distortion level and analyzing both of them. As a result, it was observed that as the curve radius practically increases in the theoretical recognition curve radius, the range of error tends to go down, which reflects well the characteristics of the curve sections on the road. Based on this research, it is expected that this research will be helpful to eliminate the safety defects when designing the curve sections and contribute to develop the road design standards considering human factors in the future.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.30-38
• /
• 2022

It is important to grasp biometric data in real time for prompt action in the event of a safety accident at a work site where the risk of safety accidents exists. Among them, blood oxygen saturation is the most important factor in maintaining human life, so real-time oxygen saturation measurement and monitoring is necessary according to the situation as a preemptive response for worker safety management. By receiving real-time bio-signals from workers wearing health and life-risk protective clothing, and sharing and analyzing the worker's risk status in an external system, it is possible to diagnose the worker's current condition and efficiently respond to emergencies that may occur to the worker. In this paper, we propose a wearable oxygen saturation measurement platform technology that can monitor the risk of harmful gases and oxygen saturation of the wearer in real time and ensure the wearer's activity and safety in order to cope with emergency situations at the scene of an accident. If we overcome the limitations identified through the results of the proposed system later and apply improved biodata such as motion correction to the platform, we expect that it will be usable not only in hazardous gas environments, but also in hospitals and homes for emergency patients.

• The Journal of Engineering Geology
• /
• v.9 no.2
• /
• pp.161-176
• /
• 1999

The objectives of this study are to analyze the changes of geo-surface topography in the Siwha embankment and the Ahsan city area by the image processing of Landsat Thematic Mapper data, and to estimate the reclaimed amount of the exposed tidal flat in the Siwha area using the GIS. False color composite, Tasseled cap, NVDI(normalized difference vegetation index), and supervised classification techniques were used to analyze the distribution of sediments and the aspect of topographical variations caused by artificial human actions. The total amount of the exposed tidal flat was estimated on the basis of the database snch as aerial photography, hydrographic chart, geological map, and scheme drawing in the Siwha area. The possible excavation regions for a seawall were predicted analyzing the supervised classification image of Landsat TM data. Tasseled cap images were used to observe the distribution of sediments. The difference of the NDVI images between spring and summer seasons indicates that deciduous and coniferous forests were distributed over the whole areas. The total fill-volume of the exposed Siwha tidal flat and the fill-volume of the construction planning seawall were calculated as $581,485,354\textrm{m}^3{\;}and{\;}3,387,360\textrm{m}^3$, respectively, from the digital terrain analysis. Daebu Island, Sunkam Island, and the part of Songsan-myeon were chosen as the cut area to make the seawall, and their cut-volumes were estimated as $5,229,576\textrm{m}^3,{\;}79,227,072\textrm{m}^3,{\;}and{\;}47,026,008\textrm{m}^3$, respectively. Therefore, the cut-volume of Daebu Island alone among three areas was sufficient to make the seawall.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.460-479
• /
• 2007

When culture took large part in industrial area, every country has tried to utilize own cultural contents for educational or commercial purpose and the various cultures and histories are recognized as a main concept or subject so that a number of scholars who study history increase. In video game field, special characteristics of interface that audiences participate in the game to complete story-telling is considered as efficient material for learning process. As observed above, it is important to analyze the games that every country makes and export to the world in which the video games is understood as a play of human in general. This Paper has firstly analyzed the most favorite historical games developed in Korea, the USA, Japan, Taiwan and Germany from 1980 to 2005 and secondly, compared that wars and historical origin appears in game scenario, a world view and background story and finally after point out the preferable era and genre of the countries then propose the promising way of design for historical video games. In the process of analysis of a view and heroes in historical games, we compared the real persons, the real historical events and novel in which 11.8% only employed the real persons in 8 out of 68 games. Also the real history and background story are appeared in 37 games which is 54.4% of them. We discovered that the main material that is popular for each country is the historical backing rather than real persons where the favorite historical background is chosen at which they are proud of; 3-Throne era with strong ancient Gogurye for Korea, the 1st and 2nd World Wars and the Independence War for the USA, the tide of war around Middle age for Japan, ancient history of Europe for Germany. The favorite age for video games is Ancient times with 37 games for 54.4%, Middle Age with 7 games fer 10.3%, the prehistoric age with 5 games for 7.35%, remote age with 1 for 1.47%, while current historical games favor Ancient or Modern Age.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.452-460
• /
• 2016

This study was designed to develop a functional pharma-food using Salicornia europaea (SE). Tiny seeds from the mature SE were collected, and their biological activities were evaluated. The extraction yield of the seed in hot water was found to be 29.6% and the hot water extract (HWE) contained 25.7 mg/g total polyphenol (TP) and 11.5 mg/g total flavonoid (TF), which are similar to those contained in leaf and stem of SE. Among the subsequent organic solvent fractions, the ethylacetate (EA) fraction exhibited the highest content of TP (158.3 mg/g), TF (136.2 mg/g), and total sugar (228.3 mg/g). The EA fraction exhibited broad-range antibacterial activities against gram-positive bacteria, and the butanol fraction exhibited growth inhibitory effect against only Staphylococcus epidermidis. An antioxidation activity assay of the HWE and its fractions showed the EA fraction to have the highest radical scavenging activity with $RC_{50}$ values of 57.0, 29.0, and $28.9{\mu}g/ml$ against DPPH anion, ABTS cation, and nitrite, respectively. The $RC_{50}$ values of vitamin C against DPPH anion, ABTS cation, and nitrite were 10.7, 4.0, and $18.0{\mu}g/ml$, respectively, indicating that the EA fraction of SE has potent antioxidant compounds. In an anticoagulation assay, the EA fraction exhibited a 15-fold extended thrombin time at 5 mg/ml and activated partial thromboplastin time at 7 mg/ml, which are comparable to the activities of aspirin. The HWE and its fractions had no hemolysis activities against human RBCs at up to 1 mg/ml. These results suggest that the EA fraction from SE has a great potential as a new antibacterial and anticoagulation agent.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.217-224
• /
• 2008

In deep geological disposal system, the integrity of a disposal canister having spent fuels is very important factor to assure the safety of the repository system. This disposal canister is one element of the engineered barriers to isolate and to delay the radioactivity release from human beings and the environment for a long time so that the toxicity does not affect the environment. The main requirement in designing the deep geological disposal system is to keep the buffer temperature below 100$^{\circ}C$ by the decay heat from the spent fuels in the canister in order to maintain the integrity of the buffer material. Also, the disposal canister can endure the hydraulic pressure in the depth of 500 m and the swelling pressure of the bentonite as a buffer. In this study, new concept of the disposal canister for the CANDU spent fuels which were considered to be disposed without any treatment was developed and the thermal stability and the structural integrity of the canister were analysed. The result of the thermal analysis showed that the temperature of the buffer was 88.9$^{\circ}C$ when 37 years have passed after emplacement of the canister and the spacings of the disposal tunnel and the deposition holes were 40 m and 3 m, respectively. In the case of structural analysis, the result showed that the safety factors of the normal and the extreme environment were 2.9 and 1.33, respectively. So, these results reveal that the canister meets the thermal and the structural requirements in the deep geological disposal system.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.2
• /
• pp.87-102
• /
• 2022

To clarify the spatial distribution pattern of macrozoobenthos in Korean coastal waters in the summer season and investigate the relationship between community structure and benthic environmental factors, field surveys on community structure and benthic environmental factors were conducted at 117 stations in August 2017. A total of 613 macrobenthic species were identified, with the mean density of 1,228 ind./m² and the mean biomass (wet weight) of 110.9 g WW/m². Rich biodiversity was found at stations near Wando and along the coast of the East Sea, and there is a trend that stations with greater biodiversity also showed higher mean density as well. The dominant species in all the coastal areas in Korea was Heteromastus filiformis, which were found at most of the stations during the survey. The relatively deep areas in the East Sea were dominated by Magelona johnsoni and Maldane cristata, which were the third and ninth dominant species in the study areas, respectively. Pseudopolydora kempi and Rhynchospio sp. were observed only at the station located in the Nakdong River estuary. From the cluster analysis the stations could be clustered into three station groups with more similar faunal composition. Group A was located in the eastern coast, characterized with deep water depth and low levels of sand contents, while Group B was located in the southern coast, characterized by shallow depth of water and high content of mud and organic matter. Lastly, Group C was in the western coast, demonstrating low levels of mud content and organic matters. The biodiversity of macrobenthic species in the study area showed high positive correlation coefficients with benthic environmental factors such as sorting, clay, silt, and contents of organic matter in sediments, but negatively correlated with the sand contents. Major dominant species, Theora lata and Eriopisella sechellensis, both showed negative correlation coefficients with the sand contents, but a relatively high positive correlation with the levels of organic contents.It can be concluded that the spatial distribution patterns of macrobenthic organisms in Korean coastal waters are affected by depth, sediment type, and contents of organic matters.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1657-1667
• /
• 2021

Anthropogenic activities and natural processes have been causes of land subsidence which is sudden sinking or gradual settlement of the earth's solid surface. Mexico City, the capital of Mexico, is one of the most severe land subsidence areas which are resulted from excessive groundwater extraction. Because groundwater is the primary water resource occupies almost 70% of total water usage in the city. Traditional terrestrial observations like the Global Navigation Satellite System (GNSS) or leveling survey have been preferred to measure land subsidence accurately. Although the GNSS observations have highly accurate information of the surfaces' displacement with a very high temporal resolution, it has often been limited due to its sparse spatial resolution and highly time-consuming and high cost. However, space-based synthetic aperture radar (SAR) interferometry has been widely used as a powerful tool to monitor surfaces' displacement with high spatial resolution and high accuracy from mm to cm-scale, regardless of day-or-night and weather conditions. In this paper, advanced interferometric approaches have been applied to get a time-series of land subsidence of Mexico City using four-year-long twenty ALOS PALSAR L-band observations acquired from Feb-11, 2007 to Feb-22, 2011. We utilized persistent scatterer interferometry (PSI) and small baseline subset (SBAS) techniques to suppress atmospheric artifacts and topography errors. The results show that the maximum subsidence rates of the PSI and SBAS method were -29.5 cm/year and -27.0 cm/year, respectively. In addition, we discuss the different subsidence rates where the study area is discriminated into three districts according to distinctive geotechnical characteristics. The significant subsidence rate occurred in the lacustrine sediments with higher compressibility than harder bedrock.

• Knowledge Management Research
• /
• v.22 no.4
• /
• pp.103-118
• /
• 2021

Gross Domestic Product(GDP) is affected by the economic power of each industry. Therefore, using statistical data related to the food and drug industry, we tried to determine the proportion of GDP and analyzed the impact of the food, medical & drug industry on the domestic economy through comparison with other industries. The food, medical & drug industry has a wide range of industries among domestic industries and is closely related to the lives of the people. In addition, human lifespan is increasing, and recently, due to the spread of an infectious disease called COVID-19, the bio sector belonging to the food, medical & drug industry is in the spotlight. Attention is needed to the industry as the competitiveness of the food, medical & drug industry is expected to increase. The Ministry of Food and Drug Safety provides statistics on the food, medical & drug industry, but does not provide a systematic share of GDP. Since it is difficult to determine how influential the industry is compared to other industries, this study attempts to obtain the share of GDP in the food, medical & drug industry and compare it with other industries. In the process of obtaining GDP in the food, medical & drug industry sector, there was a difficulty in that the figures in statistical data were not unified by time point. In order to overcome the limitations, statistical data as a standard are determined. The GDP of the Food, Medical & Drug Industry was estimated using total added value, production, sales, and added value by industry. Compared to other industries, the Food, Medical & Drug Industry's GDP ranked second after the GDP of the manufacturing industry. As a result, it suggests that the food, medical & drug industry has a great influence on the national economic power among domestic industries.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.99-110
• /
• 2012

The purpose of the study is to collect basis data for to establish standard administrative processes of liquid fertilizer treatment. From this survey we could make out the key point of each step through a case of effective liquid manure treatment system in pig house. It is divided into six step; 1. piggery slurry management step, 2. Solid-liquid separation step, 3. liquid fertilizer treatment (aeration) step, 4. liquid fertilizer treatment (microorganism, recirculation and internal return) step, 5. liquid fertilizer treatment (completion) step, 6. land application step. From now on, standardization process of liquid manure treatment technologies need to be develop based on the six steps process.