• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.776-788
• /
• 2019

This study developed an ergonomic Korean female military winter jacket and (inner and outer) pattern in in order to increase dimension and operational suitability for military missions. First we developed the 1st development pattern and sample jackets with improved dimensions and operational suitability based on a previous investigation of fitness and motion suitability of Korean female military winter jackets (inner and outer) and motion suitability by a wearing test. The evaluation result of fitness for the 1st development pattern were over 4.0 (5.0 Likert scale) for both the inner and outer jacket, a positive result and the result of motion suitability were over 3.5 in both the inner and outer jacket except for the neck front part by collar height. However, we did not modify the collar height because decreases in warmth and military regulations. We also evaluated appearance by experts that showed good results in both the inner and outer jacket. Finally, we developed a final pattern based on evaluation results and military regulations. Existing military uniform research was conducted mainly on male soldiers. Beginning with this study, we expect to expand research on the development of military uniform patterns suitable for a female soldier body type.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.943-961
• /
• 2018

This study was to develop an ergonomic Korean male military winter jackets (inner and outer) pattern. First, we developed a prototype pattern and sample jackets based on a previous investigation for fitness and motion suitability of Korean male military winter jackets and evaluated fitness and motion suitability by a wearing test. The evaluation results were positive with an over 3.0 (5.0 Likert scale) for both the inner and outer jacket. However, a relatively low score was shown in the sleeve length and collar front height at the inner jacket and shown in hem circumference, neck circumference, elbow and front neck at the outer jacket. Next, we developed the secondary pattern and sample jacket reflecting the prototype evaluation result and executed expert evaluation. The result showed that the ease amount was appropriate (except for the collar back height) and the appearance was good. Finally, we developed a final pattern that showed good results after evaluation at a Korean military army base.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.329-333
• /
• 2008

현재 소방관들은 주로 무전기로 다른 소방관이나 중앙 지휘관과 통신을 하고, 필요 정보를 취득 혹은 공유 하면서 소방 활동을 수행 하고 있다. 소방 현장에서는 여러 가지 위험이 존재 하고 이를 극복하기 위해서 많은 정보를 필요로 할 때가 많지만, 이를 미리 모두 숙지 하고 있거나, 동적으로 변화 하는 상황을 무전기를 통하여 취득하고 이해 하기는 쉽지 않다. 이러한 어려운 점을 해소 하기 위하여 웨어러블 컴퓨터를 이용한다면 소방 활동을 도울 수 있을 것이며, 이에 적합한 웨어러블 인터페이스가 디자인 되어야 한다. 이 논문에서는 시나리오에 기반 한 인터액션 모델링, 화재 현장 및 소방 상황에서의 인간공학적 제한 조건, 사용자 설문조사, 그리고 인터페이스 패턴을 기반으로 소방 활동을 효과적으로 도울 수 있는 인터페이스 디자인 및 개발에 대하여 설명하고자 한다.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.495-507
• /
• 1998

For the product development using Human Sensibility Ergonomics, it is very important to understand human preference and sensibility of products. Human sensibility is affected by each person's psychological factor and is different for individuals. This paper analyzed consumer's automobile purchase patterns, according to the types and the features of face, using the psychological concept that human the types and the features of face have been used to understand human personalities. In this paper, it is showed that there are some differences among customer's automobile purchase patterns, according to the types and the features of face If further study has been done in this field, this study could be applicated in Human Sensibility Ergonomics, Marketing, etc.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.37-37
• /
• 1995

CNS의 인간공학적 실험 평가 항목중 중요 요소의 하나인 운전원의 인지적 작업부하(정보입력, 의사결정, 및 정서적 부하)를 평가하기 위해 인지적부하를 부과할 수 있는 사건 시나리오 구성방법, 피실험자에 대한 훈련 방법, 실험과 디브리핑을 통한 운전원 행위 및 사건 경위 기록 체계를 개발하였다. 운전원 행위자료 데이타베이스에는 특정 요소행위 시점, 관측행위 분류, 사용된 표시장치, 의사결정내용, 사용된 조종장치, 조종행위분류, 운전원간 의사소통 내용, 정서상태, 표시장치 및 조종장치의 사용편의성 여부 및 불편이유, 주요사건 발생시점에 관한 정보가 기록되었다. 운전중 CNS 운전원에 제시되는 자극의 변화에 수반되는 운전원의 생리적 변화를 측정하여 이로부터 운전원이 받는 정신부하를 측정하는 체계를 개발하였다. 이를 위해 ECG, EEG, 호흡패턴,피부온도, 수평EOG, 수직EOG, 심박률, 및 호흡률의 생리변수에 대한 측정이 이루 어졌으며 각각의 신호를 초당 100개씩 샘플링하여 A/D 변환하고 정신부하 추정 알고리즘을 거쳐 정신부하 여부를 판정하는 점수를 구하였다. 다차원의 정신부하 판정 점수는 OR gate에 의해 통합되어 정신부하 발생시점과 함께 정신부하데이터베이스에 기록되었다.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.9-17
• /
• 2018

Recently, much attention in electronic financial fraud has been dramatically increased. In particular, the electronic financial fraud has been transforming to social engineering. Despite the growing interest in electronic financial fraud, few guidelines exist how to effectively avoid the serious damage from electronic financial fraud. Moreover, it is rarely investigated cases of victims from financial fraud. Therefore, the purpose of this study is to investigate why financial fraud crime victims occurs. To enhance mundane realism, we conducted Focus Group Interview(FGI) with actual victims from financial fraud crime. Drawing analysis of FGI with actual victims, we found that there are certain damage patterns. Further, we found that the reason why financial fraud crime victims occurs is optimistic biases of humans rooted in behavioral economics. Therefore, this study provides the valuable guidelines and directions to prevent electronic financial fraud based on risk and crisis management perspective. Ultimately, this study is able to help the establishment and implementation of a comprehensive electronic financial fraud prevention policy.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2009.05a
• /
• pp.239-242
• /
• 2009

최근 3 차원 측정 기술을 활용한 운동 기능성의 향상을 위한 연구가 활발히 진행되고 있다. 그 예로 3 차원 인체 정보를 이용한 의복패턴 제작 시에 필요한 절개선으로 피부상에서 동작 시 늘어나지 않는 선(Lines of Non-Extension, LoNE)을 찾아내어 활용한 연구가 발표된 바 있다. 이러한 LoNE 은 기존 의복구성을 위한 봉제선이나 기능선으로 활용될 때 동작기능성을 저해하지 않는 특징이 있다. 이에 본 연구에서는 스포츠웨어에서 활동성이 큰 상체의 어깨부위에서 Lines of Non-Extension 을 탐색하고자 하였다. 연구 방법으로는 20 대 후반 남성 2 명을 대상으로 체표의 등 부분에서 3cm 간격으로 계측점을 표시한 후 3D 인체 데이터 (Cyberware, WB)를 획득하였다. 측정시의 자세는 팔을 $30^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$ 외전시켰다. 피부 표면에서의 길이 변화는 구획의 크기를 달리하면서 가로, 세로, 사선방향으로 동작에 따라서 측정하였다. 변화량은 정자세($30^{\circ}$)를 기준으로 A 라 하였을 때, 기준자세와의 차이가 가장 큰 변화량을 보인 자세를 B 라 하고 A 와 B 간의 차이로 계산하였다. 연구결과, NASA 의 Biosuit 에서 소개된 Iberall(1970)의 LoNE 중 진동둘레를 포함한 팔 부위와 등, 어깨 부위에서 유사한 라인을 찾았다. 본 연구에서와 같이 구획별 사선방향 피부 변화량을 측정하는 것은 피부면에 숨겨진 인간공학적 의복 기능선을 탐색하는 데 효과적임을 확인하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.196-200
• /
• 2001

Foot has two functions : one is walking (or propulsion), the other is supporting or protecting of human body. In spite of such important roles, the importance of foot in keeping health has been easily disregarded. The bottom of foot is usually regarded as the second heart, for it is the pocket edition of all the principal parts of human body. Shoe is one of the tools to protect foot, and to wear a good shoe is the most demanded point in keeping health, Shoe can be different in kinds and shapes according to each one's usage. That is, different conditions of different people should have the different results in the material, design, last, pattern and structure in manufacturing shoe. A good shoe is absolutely a shoe with its right suitability, elasticity and adaptability. To make this healthy shoe, it is needed to design in the way of human technology, and the relative and scientific materials are basically required in manufacturing it. Recently there is an increasing demand for milti-functional shoe that can improve the efficiency of work in parallel with the maintenance of health. Accordingly this paper put its main purpose on the development of a healthy shoe based on proper and right theory and test.

• Archives of design research
• /
• no.18
• /
• pp.177-186
• /
• 1996

With the change of patterns and the environment of the national standard of living the prohlem of environmental pollution became increasingly serious. Because of the enormous increase of various kinds of used and (after utilization) useless articles, efforts to save resources as well as the environment and the promotion of reprated utilization and recycling are inavoidable. The recognition of an environmental an health problem, and the desire for nonpollution created a desire for environment-friendly products in order to avoid an environmental consumptionism. Drink vending machines making use of vessels only once are closely related to the environmental problem. It is therefore necessary to develop an ecologically designed vending machine. In this study the backgrounds and concepts of green design, classification, construction and the environment of a drink vending machine arc analyzed. From this st1.rting-point a concept for the design of a drink vending machine is developed by two concepts : Type A (seperated-gathering type) and Type B (recycling type). Then three defferent types of vending-machines arc introduced a wall -adherable type, a center est1.blishable type and a desk top type. The conclusion of the text is threefold. There are needs for an ecological design of vending machines, ergonomIc considerations and a harmonization of the styldapperarance) of the machine and its circumferences.

• Ecology and Resilient Infrastructure
• /
• v.5 no.2
• /
• pp.72-81
• /
• 2018

Groundwater level (GWL) fluctuation, which can occur due to several artificial and natural reasons, causes reduction of bearing capacity of foundation structures and can lead settlement of ground. As a result, GWL fluctuation affects stability and serviceability of entire building. However, in many case, GWL is considered as fixed value that obtain from geotechnical investigations. That is reason that GWL fluctuation is considered as area of non-geotechnical engineering. In present study, factors causing GWL fluctuation were analyzed at urban and rural area as preliminary research of quantification of GWL fluctuation. GWL varies according to hydrological and geographical characteristics. Also, the influence factors are largely affected by hydrological and geographical characteristics.