• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.6
• /
• pp.1-8
• /
• 2009

Detecting entry and exit zones in a view covered by multiple cameras is an essential step to determine the topology of the camera setup, which is critical for achieving and sustaining the accuracy and efficiency of multi-camera surveillance system. In this paper, a graph theoretic clustering method is proposed to detect zones using data points which correspond to entry and exit events of objects in the camera view. The minimum spanning tree (MST) is constructed by associating the data points. Then a set of well-formed clusters is sought by removing inconsistent edges of the MST, based on the concepts of the cluster balance and the cluster density defined in the paper. Experimental results suggest that the proposed method is effective, even for sparsely elongated clusters which could be problematic for expectation-maximization (EM). In addition, comparing to the EM-based approaches, the number of data required to obtain stable outcome is relatively small, hence shorter learning period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.93-98
• /
• 2017

The fixing behaviors of raw silk yarns treated with melamine and formaldehyde at a molar ratio of 1:3 for trimethylolmelamine were investigated. Sericin was fixed during the fixing process, but a part of sericin I was removed simultaneously by hot water. The weight losses by fixing and the degumming losses by degumming greatly decreased with increasing concentrations of melamine and formaldehyde. The silk yarns fixed with 0.011 M melamine and 0.033M formaldehyde were significantly degummed due to the insufficient fixation of sericin and the alkaline hydrolysis of sericin by sodium carbonate during the degumming process. On the other hand, the silk yarns fixed with 0.055M melamine and 0.165M formaldehyde were degummed slightly (the degumming losses of 3-8%) due to the strong fixation of sericin, which might result from the many cross-linkages between the sericin I molecules, which were formed by trimethylolmelamine. Those fixed with the fixing solution containing 15% owf softener showed the lowest weight and degumming losses because under the condition of 15% owf softener, the cation of the softener can effectively form ionic bonds with the negatively charged side chain of aspartic acid in sericin. In addition, van der Waals' forces may be also formed between the hydrophobic tail of the softener and the hydrophobic region of sericin, which may help inhibit the removal of sericin I.

• Archives of design research
• /
• v.14 no.2
• /
• pp.163-174
• /
• 2001

William Morris(1834-1896) was the most versatile and talented of all British nineteenth century polymaths. Since his death over one hundred years ago his achievements as an artist, designer, manufacturer, shop-keeper, poet, author, publisher, printer, collector, teacher, conservationist, political activist and environmentalist have influenced the lives and work of people throughout the world. Moris is now best known for his attractive and colorful patterns. The decorating firm of Morris, Marshall, Fault & Company(Morris & Company after 1875) was established in 1861. Over the years it produced works, ranging from stained·glass windows and furniture to tapestries, carpets and printed and woven fabrics, that had great influence on the course of British design. His earliest experiments with the craft were amateurishly worked embroideries made for his own use. Before long, Morris began to produce textiles on a more commercial basis. In order to control production properly, Morris set about learning the various textiles techniques, first dyeing and blockprinting, hand-loom jacquard and eventually, carpet and tapestry weaving. This extraordinary involvement with the practical side of manufacture separated Morris from all other designers of his time and contributed in no small way to his success. Morris's designs for textiles, embroidery, dyeing, woven, carpet and tapestry were commercially produced, that are most universally admired and frequently copied today. These have a timeless quality arising from the designers respect for and knowledge of the technique. Of equal importance was his love of nature, evidence of which can be seen in even the smallest details of each of his patterns.

• Cross-Cultural Studies
• /
• v.44
• /
• pp.7-28
• /
• 2016

This study examines the sociocultural background of negritude by delving into Caseríos, Reggaeton, and $Trigue{\tilde{n}}os$, which are interrelated with the racism deeply embedded in Puerto Rican society. These terms have also been discussed in relation to the ideological discourse of racial democracy, which has caused Puerto Rican people to be blind to silenced inequality and hegemonic racial policies. Caseríos, housing projects for the poor urban class, are targeted by the state - sponsored project 'Mano Dura'. Due to the policing, control and surveillance of this anticrime project, Caseríos became perceived even more as residential communities of violence, poverty, and insecurity generally connected to the stigmatization of blackness. Reggaeton emerged as a mega hit genre of transnational Puerto Rican music in the 2000s, which in turn, drew attention to both the afrodiaspora in New York and the urban musical power in the Island. This musical genre serves to highlight the meaningfulness of black heritage in the national cultural identity of Puerto Rico. $Trigue{\tilde{n}}idad$ has recently become a common racial cultural term that embraces a broader racial paradigm of mestizaje. This term can function as an alternative concept of blackness, but it has not yet been transformed into enough cultural politics to resist ongoing racial democracy. The three terms intrinsically address both the uprooted racism and potential methods of challenging it. This paper argues the necessity of stronger and more responsive cultural politics to defy the pervasiveness and invisibility of racial discrimination in Puerto Rico.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.151-156
• /
• 2013

Crystallization of $CaCO_3$ is practiced on a polymethylsiloxane (PDMS) - based microfluidic system. Liquid- liquid reaction was investigated by mixing calcium chloride ($CaCl_2$) and sodium carbonate ($Na_2CO_3$) solution to crystallize $CaCO_3$. Aspartic acid (Asp) was added to investigate the morphology change such as vaterite and calcite. Suitable ratio of $Na_2CO_3$ and $CaCl_2$ was searched for initial seed formation. Christmas tree model was used as microfluidic device to form concentration gradient of $Na_2CO_3$ and $CaCl_2$. After observing microfluidic channel by using optical microscope, we found that seeds of $CaCO_3$ were formed under the condition that the ratio of $Na_2CO_3$ and $CaCl_2$ was 2:1. Morphology of crystals were also observed as $CaCO_3$ crystals grow. When Asp was added, vaterite crystal was more frequently found in two morphologies (vaterite and calcite) and seed formation and crystal growth were inhibited.

• Journal of the Korean Ceramic Society
• /
• v.50 no.5
• /
• pp.348-352
• /
• 2013

The evaluation of plasma resistance and the characteristics of yttria ceramics fabricated by calcination yttria as a starting material without dopants under an oxidation atmosphere was investigated. Regardless of the starting materials, as-received, and calcined yttria powder, XRD patterns showed that all samples have $Y_2O_3$ phase. The three cycling process inhibited a large grain, which occurs frequently during the yttria sintering, and a high density ceramic with a homogeneous grain size was obtained. The grain size of the sintered ceramic was affected by the starting powders. The smaller the grain size, the larger were the Young's modulus and KIC. Compared to $Al_2O_3$ and $ZrO_2$ ceramics, yttria ceramics showed a 3 times larger plasma resistance and a 1.4~2.2 times lower weight loss during the plasma etching test, respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.592-598
• /
• 2011

Electrode of solid oxide fuel cell must have sufficient porosity to allow gas transport to the interface with electrolyte effectively but high porosity has a negative impact on structural stability in electrode support. Thus, the upper limit of porosity is based on consideration of mechanical strength of electrode. In this study, the effect of microstructure of Ni-YSZ anode supported SOFC on the mechanical and electrical property was investigated. LSCF composite cathode and 8YSZ electrolyte were used. The porosity of the anode was modified by the amount of graphite powder and added graphite contents were 24, 18, 12 vol%, respectively. The higher the porosity, the better the electrical performance, $P_{max}$. While the flexural strength decreased with increasing the amount of graphite. But the rate of increase in electrical performance and the rate of decrease in mechanical strength were not directly proportional to amount of graphite. The optimum graphite content incorporating both electrical and mechanical performance was 18 vol%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.151-156
• /
• 2018

Because of its large differences in writing style, context-independency and high recognition accuracy requirement, free handwritten digital identification is still a very difficult problem. Analyzing the characteristic of handwritten digits, this paper proposes a new handwritten digital identification method based on combining structural features. Given a handwritten digit, a variety of structural features of the digit including end points, bifurcation points, horizontal lines and so on are identified automatically and robustly by a proposed extended structural features identification algorithm and a decision tree based on those structural features are constructed to support automatic recognition of the handwritten digit. Experimental result demonstrates that the proposed method is superior to other general methods in recognition rate and robustness.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.128-132
• /
• 1983

The apple seed contained 25.96% of crude fat and 37.62% of crude protein. The lipid fractions obtained by cilicic column chromatography were mainly composed of about 93.52% neutral lipid, whereas compound lipid was only 6.48% level. Among the neutral lipid separated by thin layer chromatography, triglyceride was 92.17%, sterol ester, sterol, diglyceride and free fatty acid were 3.53, 2.25, 1.44 and 0.56, respectively. The predominent fatty acids of total and neutral lipids were linoleic acid (59.79-69.37%) and oleic acid (20.04-29.82%), but those of glycolipid and phojspholipid were linoleic acid (29.20-36.04%). The major fatty acids of triglyceride separated from neutral lipid were oleic acid (44.31%), linoleic acid (36.66%) and palmitic acid (12.48%). The salt soluble protein of apple seed was highly dispersible in 0.02M sodium phosphate buffer containing about 1.0M $MgSO_4$, and the extractability of seed protein was 37%, Glutamic acid was the major amino acid in salt soluble protein, followed by arginine and aspartic acid. The eletrophoretic analysis showed three bands in apple seed protein, and the collection rate of the main protein fraction purified by Sephadex G-100 and G-200 was 76.6%. Glutamic acid, aspartic acid and arginine were the major amino acids of the main apple seed protein. The molecular weight for the main protein of the apple seed was estimated to be 45,000.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.250-256
• /
• 1982

A series of studies were conducted to find out the possibility of utilizing grape seed as resources of food fats and proteins, and the results of the studies are as follows: The grape seed contained 25.1%, of crude fat and 12.0% of crude protein. The lipid, fractions obtained by silicic acid column chromatography were mainly composed of about 95.5% neutral lipid, whereas compound lipid was only 4.5% level. Among the neutral lipid by thin layer chromatography, triglyceride was 91.89%, sterol ester, sterol, diglyceride and free fatty acid were 3.24%, 2.87%, 1.20% and 0.80%, respectively The predominant fatty acids of total and neutral lipids were linoleic acid $(69.72{\sim}71.72%)$ and oleic acid $18.09{\sim}19.46%)$, but those of glycolipid and phospolipid were linoleic acid $(31.49{\sim}38.18%)$, oleic acid $(20.20{\sim}35.27%)$ and palmitic acid $(26.80{\sim}39.98%)$. The major fatty acids of triglyceride separated from neutral lipid were oleic acid (43.08%), linoleic acid (38.42%) and palmitic acid (11.60%). The salt soluble protein of grape seed was highly dispersible in 0.02M sodium phosphate buffer containing about 1.0M $MgSO_4$, and the extractability of seed protein was 31%. Glutamic acid was the major amino acid in salt soluble protein, followed by arginine and aspartic acid. The electrophoretic analysis showed 3 bands in grape seed protein, and the collection rate of the main protein fraction purified by Sephadex G-100 and G-200 was 82%. Glutamic acid, aspartic acid and arginine were the major amino acids of the main grape seed protein. The molecular weight for the main protein of the grape seed was estimated to be 81,000.