• Journal of Welding and Joining
• /
• 제11권3호
• /
• pp.34-47
• /
• 1993

Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• Economic and Environmental Geology
• /
• 제11권3호
• /
• pp.89-98
• /
• 1978

Mineralogy, beneficiation, and processes of titanium ores are reviewed from petrographic viewpoints. The most important titanium minerals are ilmenite ($FeTiO_3$) and rutile ($TiO_2$). Ilmenite will play major role :for raw material, because rutile are rapidly diminishing. Thus, there is a need to develope a successful process for producing high grade Ti02 from ilmenite. Commercial, as well as R and D processes to treat more abundant ilmenite ores fall in three general classess: 1. Iron in ilmenite is partially or completely reduced and separated either physically or chemically. 2. Iron is reduced to ferrous state and chemically leached away from the titanium. 3. Ore is treated to make chlorides either selectively or with subsequent separation and purification of $TiC_4$. Routes and efficiencies of these process technologies are primarily influenced by the particular ore deposit to be mined and secondly by environmental considerations. One deposit parameters which influence ilmenite process technologies are: 1. Complexity of microtextures of ilmenite intergrown with Fe-oxide minerals. 2. Composition of concentrates; ilmenites contain minor amounts of substituted Mg, Mn, and V. These elements plus iron and gangue minerals can cause difficulties to complete reactions, substantial acid consumption, difficulties of removing waste solids, and waste disposal problems. Major contributions to be made by petrologists for process optimization are: characterization and interpretation of compositional and physical changes of raw materials and solids derived from process streams. These informations can play significant role in selecting and improving process steps for titania production.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제26권5B호
• /
• pp.447-457
• /
• 2006

This paper presents a numerical model for the simulations of 2D depth-averaged flows. The shallow water equations are solved numerically by the Characteristic Dissipative Galerkin (CDG) finite element method. For validation, the developed model is applied to the hydraulic jump. The computed results are compared with the analytical solution, revealing good agreement. In addition, flow in a contracting channel showing standing waves is simulated. The calculated water surface profile appears to be qualitatively consistent with the observed data. The foregoing results indicate that the model is capable of simulating the abrupt change in flow field. Next, the model is applied to the flow in a $180^{\circ}$ curved channel. The simulated results show that the velocity near the inner bank is faster than that near the outer bank and the water depth near the inner bank is shallower than that near the outer bank. However, the simulated results show that the velocity distribution across the channel is almost uniform in the bend except the reach close to the end of the bend. This is due to the limitation of the governing equations in which the transverse convection of momentum by the secondary flows along a channel bend is not taken into account.

• Composites Research
• /
• 제15권4호
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제13권7호
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of Korean Medical classics
• /
• 제19권4호
• /
• pp.12-26
• /
• 2006

유하간(劉河間), 주단계적학설전파이후(朱丹溪的학說전播以后), 인위명대모사의가용약적시후편중고한(因위明代某些의家用葯的時候偏重苦寒), 소이도치료상비위이극벌진양적폐두(所以도致了상脾胃而克伐眞陽的弊두). 종이위료교정착오(종而위了교正착오), 형성료주장온보적온보학파(形成了主張溫보的溫보學派). 설기(설己), 손일규(孫一圭), 張景岳等溫보학파강조주재생명적비위(張景岳等溫보學派强凋主宰生命的脾胃), 신명양기(腎命陽氣), 재변증론치방면입족우선(在辨證論治方面立足于先), 후천(後天), 중시비여신(重視脾與腎), 선용료감온적약물(善用了甘溫的藥物). 저대우교정착오기착극대적작용(저대于교正錯오起着極大的作用), 동시논증(同時논증), 이론전개상비위여신명이주제공탁료(理론展개上脾胃여腎命以主제공托了), 우기후자가심료명문학설적연구(尤其后者加深了命門학설的硏究). 장경악활동적명대시이주자학위국책적(張景岳活동的明代是以朱子學위國策的), 구비사변성적철(具비思辨性的哲) 학배영상(학背영上), 추상(推想)"리(理)"이발휘의(而발휘의) 학이론(학理론). 우시저시기의가문입족우(于是저시期의家門立足于) "황제내경(黃帝內經)" 여연기론진행료기초이론화임상연구(여연氣論진行了基초理론和임床硏究), 경악통과편찬(景岳通과編찬) "내경(內經)"이저작(而著作)"류경(類經)"등(等), 근거자기적임상실험(根据自己的임床실험), 제출료온보학설(提出了溫보학설). 타쟁론적초점시자기제출적(他爭론的焦点是自己提出的)"음부족론(음不足론)". 침대전현적쟁론상(침대前현的爭론上), 경악이하간여범계위대상경(岳以河間여凡溪위대象). "경악전서(景岳全書)" 지운(之云): "양자유하간출(襄自劉河間出), 이서화입론(以署火立論), 전용한량벌차양기(專用寒凉伐此陽氣), 기해이심(其害已甚), 뢰동원선생비위지화필수온양(賴東垣先生脾胃之火必須溫養), 연상미능진척일편지류(然尙未能盡斥一偏之謬), 이단계복출(而丹溪復出), 우입음허화동지론(又立陰虛火動之論) ...... 한량지폐우복성행(寒凉之弊又復盛行), 부선수기해자기거이불반(夫先受其害者旣去而不返), 후습이용자유미이불오(後習而用者猶迷而不悟)", 지분료하간여단계시(指분了河間여丹溪是)"헌기지마(軒岐之魔)". 저사주장현출독특적유해저(些主장현出독特的유解), 이대후대학설발전적봉헌(以대后代학설발展的奉헌). 경악침대단계적"양상유여(景岳침대丹溪的)"양상유여(陽常有餘), 음상부족(陰常不足)", "기유여변시화(氣有餘便是火)", 설성(설成)"양비유여(陽非有餘), 진양부족(眞陽不足)", "기부족변시한(氣不足便是寒)", "상화부시사화(相火不是邪火)", 대단계학설견지료비판적입장(대丹溪학설堅持了批判的立장). 단계제출(丹溪提出)"양음설(養陰說)"이수립음허화왕적병기이론(而수立陰虛火旺的病機理론), 타적(他的)'양유여음부족론(陽有餘陰不足論)'상(上), '음(陰)'주요지생식물질(主要指生殖物질), "양(陽)"지정욕(指情欲). 가시중심사상시강조생리적양생(可是中心思想是强조生理的양생), 몰수립실제(沒수立실제)'음허화왕(陰虛火旺)'적병기(的病機). 취시장경악실재완성료저사병기(就是張景岳실在完成了저些病機). 경악재(景岳在) "진음론(眞陰論)" '장형질설성진양적상(將形질설成眞陽的象), 이명문위기(以命문위其)', 용(用)"개부족(皆不足)"해석질병(解석질病), 이익화(以益火) 장수이론위치법(장水理론위治法). 이차제조좌우귀환(而且制造左右歸丸) 음이귀납료치료방법(飮以귀納了治료方法), 발휘진음(발휘眞陰), 진양학설이구조유계통적이론(眞陽學說而구造有系統的理론). 저양위의가적쟁론핵심리유상화론(저兩位의家的爭론核心里有相火論), 논자상교연구타문적이론이보고기결과(논者相교硏究他문的理론而보告其結果).

• Journal of Korean Medical classics
• /
• 제18권4호통권31호
• /
• pp.155-165
• /
• 2005

진당시기대상한론치법적연구유(晋唐時期對傷寒論治法的硏究有): 왕숙화운용당시성행적(王叔和運用當時盛行的)‘한(汗), 토(吐), 하(下), 온(溫), 구(灸), 자(刺), 수(水), 화(火)’등팔법(等八法), 귀납료상한론적증치경험(歸納了傷寒論的證治經驗); 손사막근거자기적임상경험(孫思邈根據自己的臨床經驗), 파상한론적태양병편진행료(把傷寒論的太陽病篇進行了)‘이방명법(以方名法), 안법류증(按法類證)’, 저시해시기대상한론육경병치법적대표성적연구(這是該時期對傷寒論六經病治法的代表性的硏究), 저종연구유원시화력사적국한성(這種硏究有原始和歷史的局限性), 종중국의학대상한론육경병치법적연구력사고려(從中國醫學對傷寒論六經病治法的硏究歷史考慮), 저성위료후세적치법연구적선구자(這成爲了後世的治法硏究的先驅者), 구유비상대적영향(具有非常大的影響). 재송대대상한론치법적연구상(在宋代對傷寒論治法的硏究上), 기관건작용적의가유방안시화주굉(起關鍵作用的醫家有龐安時和朱肱). 타문대상한론치료원칙적천발(他們對傷寒論治療原則的闡發), 대륙경병적분석귀납(對六經病的分析歸納), 이급제시구체적치법상(以及提示具體的治法上), 도주출료공헌(都做出了貢獻). 방안시주장료응안인(龐安時主張了應按人), 지(地), 시제정치료적사상(時制定治療的思想); 주굉이(朱肱以)‘병유표본(病有標本), 치유선후(治有先後)’위치료원칙(爲治療原則), 여상한론상결합진행치료(與傷寒論相結合進行治療), 대후세의가산생료영향(對後世醫家産生了影響). 도료금원대성무기(到了金元代成無己), 류완소(劉完素), 왕호고등(王好古等), 대내경내용각자이사상관점(對內經內容各自以思想觀点), 분별안변증론치총결료육경병적치료규율(分別按辨證論治總結了六經病的治療規律), 동시대증후화방약진행료분석(同時對證候和方藥進行了分析), 천명료구체적육경병치법적병리전귀(闡明了具體的六經病治法的病理轉歸), 도유기독창성(都有其獨創性). 성무기용내경해석료상한론(成無己用內經解釋了傷寒論), 총결해기(總結解肌) 발한(發汗) 중제발한(重劑發汗) 해표행수(解表行水) 화해(和解) 공비 지열(止熱) 삼설등치법, 위후세대상한론치법적연구개벽료도로, 인이갱가명확화해적개념(因而更加明確和解的槪念), 병응용지금(幷應用至今). 류완소제창료주화론(劉完素提倡了主火論), 중시료상한론한(重視了傷寒論汗), 토(吐), 하삼법적연구(下三法的硏究), 창립료신량해표법(創立了辛凉解表法), 대후세온병치료적발전대래료흔대영향. 왕호고작위이수학파(王好古作爲易水學派), 운용장부적한열허실이론결합약미효능(運用臟腑的寒熱虛實理論結合藥味效能), 탐색료상한론육경병적치료규율(探索了傷寒論六經病的治療規律), 강조료양명병적익진액적치료원칙(强調了陽明病的益津液的治療原則), 대후세연구상한론치법급여료흔대적계발. 이상대상한론치법연구(以上對傷寒論治法硏究), 불근성위당시임상의학적선도(不僅成爲當時臨床醫學的先導), 이차성위료후세연구상한론치법적기초(而且成爲了後世硏究傷寒論治法的基礎).

• Geophysics and Geophysical Exploration
• /
• 제7권2호
• /
• pp.136-147
• /
• 2004

In this study, the characteristics of magnetotelluric (MT) responses due to a three-dimensional (3-D) body are analyzed with 3-D numerical modeling. The first model for the analysis consists of a single isolated conductive body embedded in a resistive homogeneous half-space. The second model has an additional conductive overburden while the other conditions remain the same as the first one. The analysis of apparent resistivities shows well that the 3-D effects are dominant over some frequency range for the first model. Two mechanisms, current channeling and induction, for secondary electric fields due to the conductive body are analyzed at various frequencies: at high frequencies induction is more dominant than channeling, while at low frequencies channeling is more dominant than induction. Tippers have a strong relation to the position of anomalous body and the real and imaginary parts of induction vector also indicate the position of anomalous body. off-line conductive anomaly sometimes causes severe problem in 2-D interpretation. In such case, induction vector analysis can give information on the existence and location of the anomalous body. Each parameter of the second model shows similar responses as those of the first model. The only difference is that the magnitude of all parameters is decreased and that the domain showing the 3-D effects becomes narrower. As shown in this study, the analysis of 3-D effects provides a useful and effective means to understand the 3-D subsurface structure and to interpret MT survey data.

• Archives of design research
• /
• 제11권1호
• /
• pp.131-142
• /
• 1998

Gustav KJimt (l862-1916)was a pioneer in the field of painting and decorative art. He was severly critized by the art critics of the time because of his rebellous art style. He firmly believed that there should exist a new kind of art that should portray the essence of the new liberalized era and that shoud reveal the idea of an artist in his work. Klimt was an aesthetic who sought beauty in life. He represented man as a micro universe within the macro universe. In order to portray man's inner being and to depict the process of life and death in nature, he symbolically employed female entity as a medium. Through uses of the circles, triangles, rectangles, and the spiral forms in his paintings, Klimt symbolized the meanings of man and nature. The circle symbolizes the universe and female entity; the triangle, human being; the rectangle, the earth and male entity; and the spiral, a universal force that attracts the opposite poles. The highly decorative characteristic nature of Klint's paintings and murals has often been modified in the pattern design field. It has been applied to home-furnishings and apparel textile designs, stained glasses, tiles, and posters. The techniques and layouts of these designs have been modified so that they may suit their manufacturing processes. In general, these pattern designs have two spectrums. One is the kind of design that has faithfully carried out Klimt' s original painting style. The other is the kind that has extracted the essence from the Klimt' s original art work.

• Journal of the Korean GEO-environmental Society
• /
• 제20권7호
• /
• pp.5-10
• /
• 2019

In recent Gyeongju and Pohang earthquakes, motions that exceed the design ground motion were recorded. This has led to adjustments to the design earthquake intensity in selected design guidelines. An increment in the design intensity requires reevaluation of all associated facilities, requiring extensive time and cost. Firstly, the seismic factor of safety of built concrete retaining walls are calculated. Secondly, the seismic margin of concrete retaining walls is evaluated. The design sections of concrete walls built at power plants and available site investigation reports are utilized. Widely used pseudo-static analysis method is used to evaluate the seismic performance. It is shown that all concrete walls are safe against the adjusted design ground motion. To determine the seismic margin of concrete walls, the critical accelerations, which is defined as the acceleration that causes the seismic factor of safety to exceed the allowable value, are calculated. The critical acceleration is calculated as 0.36g~0.8g. The limit accelerations are significantly higher than the design intensity and are demonstrated to have sufficient seismic margin. Therefore, it is concluded that the concrete retaining walls do not need to be reevaluated even if the design demand is increased up to 0.3g.