• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.31-35
• /
• 2004

정보통신 기술의 발달과 디지털 방송의 시작, 뉴미디어의 출현으로 인한 통신과 방송의 융합은 가속화되고 있다. 또한 2010년까지 광대역통신망 BcN과 홈네트워크 구축을 위한 정부정책이 실행 중에 있다. 100Mbps의 전송속도를 구현해야 하는 광대역 통신망(BcN)을 위해 기존 인터넷 백본 1)망은 잘 구축이 되어 있으나 가입자까지의 망 구조에 많은 문제점을 앉고 있다. 기존 전화국을 이용한 XDSL과 지역 SO를 활용한 Cable Modem의 경우 병목현상과 이론상 속도 또한 BcN과 통방통합이 요구하는 50-100Mhz의 전송속도를 만족하지 못한다. 새로운 망 구조를 구축하기 위해 많은 비용과 시간의 소요가 예상된다 가입자 망 구축에 따른 많은 방법과 이론이 제시되고 있다. 똔 논문에선 지역 SO를 활용하여 가입자까지 망을 통방통합과 BcN에 적합한 가입자 망을 새롭게 구성하는 것을 목표로 한다. 먼저 지역 50의 망을 활용하기 위해선 기존 KT와 파워콤의 COF(Glass Optical Fiber)망과 지역 케이블 SO의 HFC 망을 이용하기에는 동축케이블 망의 물리적 특성에 따른 한계로 통방통합과 BcN에 부적합하다. Tree And Branch 구조의 HFC망 대신 $SMF^{2)}$의 기존 SO의 자가망을 새롭게 설계하고 광분배망 기술인 $E-PON^{3)}$방식을 접목시켜 최대한 동축망을 사용하지 않고 굴곡 특성에 약한 $FOG^{4)}$의 특성을 극복하기 위해 $POF^{5)}$망을 이용하여 댁내 홈게이트웨이까지 연결하는 방식으로 지역 SO를 거점으로 활용하여 댁내까지 FHHT와 홈 네트워크까지의 가입자 망을 새롭게 구성하고자 한다. 저장의 효율성을 위해 이진 포멧인 IPMP화된 MP4 파일을 생성할 수 있다.으로써, 에러 이미지가 가지고 있는 엔트로피에 좀 근접하게 코딩을 할 수 있게 되었다. 이 방법은 실제로 Arithmetic Coder를 이용하는 다른 압축 방법에 그리고 적용할 수 있다. 실험 결과 압축효율은 JPEG-LS보다 약 $5\%$의 압축 성능 개선이 있었으며, CALIC과는 대등한 압축률을 보이며, 부호화/복호화 속도는 CALIC보다 우수한 것으로 나타났다.우 $23.87\%$($18.00\~30.91\%$), 갑폭 $23.99\%$($17.82\~30.48\%$), 체중 $91.51\%$($58.86\~129.14\%$)이였으며 성장율은 사육 온도구간별 차는 없었다.20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나 용존산소포화도는 가장 높다.출조건은 $100^{\circ}C$에서 1분간의 고온단시간 추출이 적합하였다. 증가를 나타내었는데

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.173-177
• /
• 2015

Rosa canina L. is health functional food materials that can help to temporarily relieve symptoms of arthritis. This study has been conducted to develop and validate analytical methods for hyperoside of Rosa canina L.. Methods based on HPLC with ultraviolet detection (UVD) were established through instrumental analytical conditions, and the examination of data, such as domestic and foreign reliable methods and journals. HPLC UVD analysis using Capcell Pak $C_{18}$ MG II column at 353 nm was determined on test through the column, mobile phase. The validation has been performed on the method to determine linearity, accuracy, limits of quantification (LOQ) and repeatability for hyperoside. The method showed high linearity in the calibration curve at a coefficient of correlation ($R^2$) of 0.999, and the LOQ was $0.393{\mu}g/mL$. Relative standard deviation (RSD) values of data from repeatability precision was between 0.6 and 2.6%. Recovery rate test at hyperoside scored between 98 and 99%. These results indicate that the established HPLC method is very useful for the determination of hyperoside in Rosa canina L. to develop a health functional material.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.112-118
• /
• 2012

In this study, physical properties of synthesized DE7-OSA82-AO and DEP52-OSA82-AOQ82 zwitterionic surfactants were measured such as critical micelle concentration, surface tension, interfacial tension, contact angle and viscosity. Phase behavior study was also performed. The dual function characteristics of a zwitterionic surfactant were investigated by determining an isoelectric point, which was attained using zeta potential measurements and QCM (quartz crystal microbalance) experiments. The isoelectric point of DE7-OSA82-AO surfactant determined by the zeta potential measurement and QCM experiment was about 7.2 and 7.4, respectively. On the other hand, the isoelectric point of DEP52-OSA82-AOQ82 surfactant determined by the zeta potential measurement and QCM experiment was about 10.9 and 11.0, respectively. The frictional property measured using an automated mildness tester showed that DE7-OSA82-AO surfactant can provide a good softening effect at an acidic or neutral condition. On the other hand, DEP52-OSA82-AOQ82 was found to provide a good softening effect to a fabric surface at a pH below its isoelectric point of 11.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.177-187
• /
• 2005

This article examined how the amount of information presented in ad design affect consumer's evaluation on the ad Existing researches have mainly considered external information presented in the ad from the resource principle perspective. This study investigated how internal information processing such as imagery information processing caused by brand names moderates persuasion effects according to the amount of external information through two experiments. The experiments leave us the conclusion that brand names presented in the ads stimulate imagery information processing when surplus cognitive resources do exist and they lead ad recipients' evaluation to positive direction in prestige brand condition and to the contrary to negative direction in non-prestige brand condition. The results contribute to the direction of ad design in that ad needs not contain as muck product-related information as needed in order to increase persuasion effects in prestige brand condition. Rather, it's necessary to leave the room for internal information processing such as imagery information processing by well structured brand equity. On the contrary, non-prestige brand needs to contain explicit product-relevant information to exert a potent influence on a4 persuasion. We hope this study result is helpful for design direction of advertisement in order to heighten persuasion effects toward ad recipients.

• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.507-516
• /
• 1995

The nonstationary identifier in the DCT domain is suggested in this study for the identification of AR parameters of above-lesion upper-trunk electromyographic (EMG) signals as a means of developing a reliable real time signal to control functional electrical stimulation (FES) in paraplegics to enable primitive walking. As paraplegic shifts his posture from one attitude to another, there is transition period where the signal is clearly nonstationary. Also as muscle fatigues, nonstationarities become more prevalent even during stable postures. So, it requires a develpment of time varying nonstationary EMG signal identifier. In this paper, time varying nonstationary EMG signals are transformed into DCT domain and the transformed EMG signals are modeled and analyzed in the transform domain. In the DCT domain, we verified reduction of condition number and increment of the smallest eigenvalue of input correlation matrix that influences numerical properties and mean square error were compared with SLS algorithm, and the proposed algorithm is implemented using IMS T-805 parallel processing computer for real time application.

• Journal of Life Science
• /
• v.20 no.6
• /
• pp.853-860
• /
• 2010

The DevSR two-component system is a major regulatory system involved in redox sensing in Mycobacterium smegmatis. The DevSR system consists of the DevS histidine kinase and its cognate DevR response regulator. When exposed to hypoxic conditions, the DevS histidine kinase is activated to phosphorylate the DevR response regulator, leading to the transcriptional activation of the DevR regulation. The ligand-binding state of the heme embedded in the N-terminal GAF domain of DevS determines the kinase activity of DevS. In this study, we demonstrated that the redox-responsive cysteine (C547) in the C-terminal kinase domain is involved in the redox-dependent control of DevS kinase activity. The formation of an intersubunit disulfide bond between the C547 residues in the presence of $O_2$ led to inactivation of DevS kinase activity. The reduction of the oxidized DevS with reductants such as $\beta$-mercaptoethanol and dithiothreitol resulted in the restoration of DevS kinase activity. It was demonstrated in vivo by complementation test that the substitution of C547 to alanine partially impaired the sensory function of DevS in M. smegmatis.

• Journal of Life Science
• /
• v.14 no.4
• /
• pp.689-695
• /
• 2004

This study was investigate the occurrence of bottom rot caused by Rhizoctonia solani at the crisphead lettuce fields in Uiryeong-gun, Gyeongsangnam-do from November to December in 2003. Incidence of bottom rot on crisphead lettuce was up to 5.3% at the six plastic houses. A total of 30 isolates of R. solani were obtained from diseased leaves of plants and were tested by artificial inoculation to the host. Among them, PY-1 isolate was selected showing highly virulent on the whole plant and was identified as R. solani AG1 (IB) based on the anastomosis test, morphological and cultural characteristics. Symptoms of bottom rot by PY-1 isolate produced small dark brown, depressed and elliptical spots on the lower part of leaves in the early stage as same as at the fields, were enlarged onto the upper part of leaves later, and the infected plant wilted and ultimately died in the end. For the pathogenicity test, triturated mycelia-inoculum (A$_{550}$=1.0) of PY-1 isolate was selected the most effective inoculum showing disease incidence of 51.1% for the mycelial inoculation at pot assay. Otherwise, WSRP media-inoculum (wheat brane ： sawdust ： rice brane ： PDB media=30 g ： 10 g ： 10 g ： 100 ml, w/w/w/v) of PY-1 isolate was effectual inoculum showing disease incidence of 61.6% for soil inoculation at the plastic house. Also, in selection of density and amount of inoculum, most suitable density of triturated mycelia-inoculum and amount of WSRP media- inoculum were determined as $A_{550}$=1.0 and 40 ml, respectively. This is the first report on the pathogenicity test using by WSRP media-inoculum of R. solani PY-1 isolate for the bottom rot of crisphead lettuce.

• Journal of Environmental Health Sciences
• /
• v.28 no.1
• /
• pp.21-29
• /
• 2002

To identify and evaluate the dichlorobenzidine(DCB)-DNA adducts in liver cell and bladder epithelial cells by $^{32}$ P-postlabeling and GC/MS-SIM, we orally exposed the dichlorobenzidine(20mg/kh body wt./day) to male Sprague-Dawley rats(l85$\pm$10g) for 14 days. Two kinds of DCB-DNA adduct(A1 and A2) were found at the same site of thin layer chromatogram of $^{32}$ P-postlabeling method in liver cells and bladder epithelial cells. In liver cells, relative adduct labeling(RAL) $\times$ 10$^{12}$ of DCB-DNA adduct A1 were 34.1$\pm$3.71 and 69.9$\pm$5.02, that of adduct A2 were 74.1$\pm$10.1 and 105.1$\pm$10.1 on 10 and 14 days after treatment, respectively. And in bladder epithelia cells, RAL $\times$ 10$^{12}$ of DCB-DNA adduct A1 were 5.92$\pm$1.60 and 15.9$\pm$1.31, that of adduct A2 were 9.81$\pm$2.81 and 22.8$\pm$1.79 on 10 and 14 days after treatment, respectively. DCB metabolites formed DNA adducts were monoacetyl-dichlorobenzidine(acDCB) and diacetyl-dichlorobenzidine(di-acDCB), which was identify by gas chromatography/mass spectrometry-scan ionization mode(GC/MS-SIM), after hydrolysis of DCB-DNA adducts isolated from live cells and bladder epithelial cells. The base peak of acDCB were 252 and 294 m/z, and that of di-acDCB were 252, 294 and 336 m/z. In conclusion, the exposed DCB formed two kinds of DCB-DNA adduct, the proximate materials of that were acDCB and di-acDCB in liver and bladder epithelial cells. And the above GC/MS-SIM method was found the DCB-DNA adducts could be monitoring by gas chromatography.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.5
• /
• pp.71-77
• /
• 2016

Solar energy is a viable source to replace fossil fuels. However, challenges associated with site selection for solar panel installation inhibit the uptake of solar energy systems. Expressway slopes offer a potentially attractive alternative for solar panel installation for the following reasons: expressway slopes are vacant public sites, they are abundant (about 4,193km in South Korea), and they are linear in nature. Traditoinally when selecting sites for solar systems conventional surveying methods are employed. Unfortunately, these methods can be dangerous, time consuming, and labor intensive. To overcome these limitations of conventional site selection methodologies, we propose an automated approach using numerical maps. First, contour and expressway polylines are extracted separately from numeric maps. The extracted contour lines are then converted into a digital terrain model; this is used to calculate aspect and slope information. Next, the extracted expressway lines are projected onto a binary image and refined to recover the disconnections, and then applied to create a buffer zone to narrow the search space. Finally, all data sets are overlaid to identify candidate sites for solar panel systems and are visually verified through comparisons with aerial photos.

• Composites Research
• /
• v.33 no.2
• /
• pp.39-43
• /
• 2020

Recently, fabrication process of thermoplastic polyamide-based composites with recyclability as well as impact, chemical, and abrasion resistance have been widely studied. In particular, thermoplastic reactive resin transfer molding (TRTM) in which monomer with low viscosity is injected and in-situ polymerized inside mold has received a great attention, because thermoplastic melts are hard to impregnate fiber preform due to their very high viscosity. However, it is difficult to optimize the processing conditions because of high reactivity and sensitivity to external environments of the used monomer, ε-caprolactam. In this study, viscosity as an important process parameter in TRTM was measured during in-situ anionic polymerization of ε-caprolactam and the solutions for problems caused by high polymerization rate and sensitivity to moisture and oxygen were suggested. Reliability of the improved measurement technique was verified by comparing the viscosity behavior at various environmental conditions including humidity and atmosphere, and it is expected to be helpful for optimization of TRTM process.