• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.266-269
• /
• 2003

마이크로파 대역에서 넓은 공진 주파수 대역폭을 갖는 V 형 테이퍼드 슬롯 안테나와 1x4 선형 배열 안테나를 설계하였다. 설계주파수는 5.8 [GHz]이었고 비유 전율이 3.48 인 RO4350 기판을 사용하였으며 멀티옥타브 특성과 복사 패턴을 얻었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.613-623
• /
• 2000

Digital TV tuner for 8-VSB modulation was developed with satisfying the requirements of ATSC. The double frequency conversion and the active tracking filter in the front-end were used to reduce interference of the adjacent channels and multi-channels, which suppress If beat and image band. However, it was impossible to get frequency mapping between tracking filter and first VCO(Voltage Controlled Oscillator) in the double conversion digital TV tuner differing from conventional NTSC tuner. This paper, therefore, suggests the available structure and a new method for automatic frequency selection by obtaining the mapping of frequency characteristic over tracking voltage and the combined hardware which compose of Micro-controller, EEPROM, D/A(Digital-to-Analog Converter), OP amp and switch driver to solve above problems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.6
• /
• pp.625-630
• /
• 2011

In this paper, spiral meander monopole printed antenna for dual band operation in GPS(1.57~1.577 GHz) and WiBro(2.3~2.4 GHz), WLAN(2.4~2.48 GHz) is proposed. Spiral(positive coupling) mounted end of monopole(small current) and meander mounted fed of monopole(big current) for reduce frequency ratio. Bandwidth(-10 dB) of the antenna is measured 130 MHz(1.49~1.62 GHz) in basic resonance frequency and 330 MHz(2.29~2.62 GHz) in harmonic resonance frequency($3{\lambda}_H/4$). The peak antenna gains are measured 2.86 dBi in GPS(1.57 GHz), and 3.49 dBi in WiBro(2.35 GHz), and 3.71 dBi in WLAN(2.44 GHz).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.41-47
• /
• 2013

This letter describes a dual-band compact monopole antenna with two branches for Wi-Fi applications. The proposed antenna is based on a planar monopole design, and composed of two branches of radiating patches for dual-band operation. The ground size of the antenna matches the ground size of a typical hand-held cellular phone for improved compatibility with mobile phone printed circuit boards. The antenna is designed using a simulator and fabricated with optimized parameters. The fabricated antenna is measured at the lower and higher operating frequencies, and the return loss coefficient, gain, and radiation patterns are determined.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.55-60
• /
• 2008

This paper proposed a dual-band RF switch using a Composite Right/Left Handed transmission line(CRLH TL) and PIN diode. RF switch is usually consist of $\lambda/4$ Right Handed transmission line(RH TL) and PIN diode. The dual band characteristics of RF switch was achieved by using CRLH transmission line instead of RH transmission line. CRLH Open-Stub was designed for resolve to reduction of isolation due to Package Inductance of PIN diode. The proposed RF switch was designed at GSM and DCS frequency-band. The measurement results showed a good agreement with theoretical result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2015

In this paper, we studied the design and fabrication of dual T type antenna to be used in LTE communication systems operating at around 1.8 GHz band. In order to improve of frequency properties of antenna, single feed microstrip patch antenna and CPWG antenna was simulated by HFSS(High Frequency Structure Simulator). The fabricated dual T type antennat showed that the measured center frequency, the minimum return loss and -10dB bandwidth were 1.79 GHz, -23.26 dB and 23 MHz, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.304-311
• /
• 2003

In this paper, we present the 2.4 ㎓ and 5 ㎓ dual band antenna fur access point of WLAN(Wireless Local Area Network). The proposed antenna must have equal gains in both frequency bands to accept two services. We proposed using collinear array to compensate gain difference for two different frequency bands. Simulation results using 3D simulation program, CST MWS(Microwave Studio), for dual band antenna with collinear away show that the maximum gain is about 4.7 dBi at 2.4 ㎓, 5.2 dBi at 5.7 ㎓. We got additional gain of about 2.1 ㏈ with collinear array for 2.4 ㎓ in measurement. Measured results for the dual band antenna with collinear array show applicable performances for access point of wireless LAN.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.25.2-25.2
• /
• 2011

저궤도위성의 정밀궤도결정은 GPS 위성과 수신기의 시계 공통오차를 제거하기 위해 이중 차분하는 방법으로 요구된 위치 정밀도를 충족시켜왔다. 그러나 빠른 속도로 지구를 회전하는 저궤도위성의 정밀궤도결정에 있어 이러한 이중 차분방법은 지구상에 광범위하게 분포된 지상 IGS 망 처리에 많은 계산 부담을 안고 있다. 그리고 지상 측지뿐만 아니라 저궤도위성을 이용한 기상관측 또는 긴급한 영상 처리 응용분야에서도 고정밀도 준실시간(Near Real Time-NRT) 처리가 요구되고 있다. 고정밀 준실시간 정밀궤도결정을 위한 대안은 이중주파수 GPS 수신기으로 IGS에서 제공되는 정밀궤도력을 갖고 고정밀 단독측위가 가능한 정밀단독측위(precise point positioning) 기법으로 상대측위와 버금가는 위치 정밀도를 얻을 수 있다. 다목적실용위성 5호는 고정밀 합성 레이더 영상 처리를 위해서 요구되는 20 cm 위성 위치 정밀도를 만족시키고, 대기 기상관측을 위해 GPS 전파 엄폐 측정값 수집을 목적으로 고정밀 이중주파수 GPS 수신기(Integrated GPS and Occultation Receiver, IGOR)를 탑재하고 있다. 이 논문에서는 IGOR의 이전 제품인 Blackjack 수신기를 탑재한 GRACE 위성의 실제 GPS 데이터를 사용하여 대략 3 ~ 5cm의 위치 정밀도를 얻었다. 준실시간 정밀궤도결정에서 정밀도 손실없이 궤도결정 처리 지연시간(latency)을 줄이는 것이 중요하다. 이 지연시간은 GPS 측정값의 양에 따라 크게 좌우되기에 GPS 측정값 샘플링 주기를 10초에서 640초까지 변화시켜가면서 정밀도를 분석한 결과, 위치 정밀도 손실없이도 궤도결정처리 지연시간을 단축시킬 수 있음을 제시하고 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.62-66
• /
• 2010

In this article, a oscillator at X-band with a double H-shape metamaterial resonator (DHMR) based on high-Q is proposed with metamaterial structure to improve Ihe phase noise and output power. The proposed oscillator is required low phase noise and high output power for the high performance frequency synthesizer. DHMR is designed to be high-Q at resonance frequency through strong coupling of E-field. This character makes phase noise excellent. The oscillator using DHMR is oscillated in X-band so as to apply frequency synthesizer of radar systems. The output power is 4.33 dBm and the phase noise is -108 dBc/Hz at 100 kHz offset of carrier frequency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.105-110
• /
• 2005

In this paper, a new technique to reduce the phase noise in microwave oscillators is proposed using the resonant characteristics of the Photonic Bandgap(PBG). We applied PBG structure to ground of the microstrip line resonator with the low Q(Quality factor). Therefore, we improved about 10 dBc in contrast to phase noise characteristic of the conventional microstrip line oscillator at 2.4 GHz ＠ 100 MHz offset. Output power is 7.09 dBm.