• Title/Summary/Keyword: 이중 주파수

Search Result 724, Processing Time 0.047 seconds

Envelope Model of Frequency-Duty-Controlled Dual Output LLC Resonant Converter (주파수-시비율-가변형 이중 출력 LLC 공진형 컨버터의 포락선 모델)

  • Lee, Ah-Ra;Cho, Sang-Ho;Han, Soo-Young;Park, Jae-Sung;Kim, Sait-Byul;Hong, Sung-Soo
    • Proceedings of the KIPE Conference
    • /
    • 2012.07a
    • /
    • pp.391-392
    • /
    • 2012
  • 본 논문에서는 페이저 변환을 통한 주파수-시비율-가변형 이중 출력 LLC 공진형 컨버터의 포락선 모델을 제시한다. 이를 이용하면 제안 회로의 대신호 및 소신호 특성을 쉽게 파악할 수 있을 뿐 아니라, 전달 함수의 정확한 수학적 해석을 통해 보상기의 설계가 용이해지는 장점이 있다.

  • PDF

Frequency range expansion of pneumatic exciter by using dual-chamber (이중챔버를 이용한 공압 가진기의 주파수 범위 확장)

  • Park, Young-woo;Kim, Kwang-joon
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2013.10a
    • /
    • pp.815-824
    • /
    • 2013
  • Pneumatic exciters can be good replacements of electrodynamic, piezoelectric and hydraulic exciters owing to simple structure and large exciting force. One problem to be solved is a slow response caused by compressibility of air. Desirable frequency response characteristics of exciter are constant magnitude and zero degree phase, because users want no time delay between input signal and output force. For this reason, frequency range of pneumatic exciters is limited about 0~1 Hz. Therefore, expansion of frequency range is an important issue when designing the pneumatic exciter. In this paper, the pneumatic exciter which has same structure with active pneumatic isolator is dealt with. The dynamic characteristics are presented, and its limitation of expanding frequency range is shown based on analytical studies. Then the pneumatic exciter with dual-chamber is suggested to overcome this problem. Based on simulation study, a design method is presented.

  • PDF

Dual-Band Class F Power Amplifier using CRLH-TLs for Multi-Band Antenna System (다중밴드 안테나 시스템을 위한 CRLH 전송선로를 이용한 이중대역 Class F 전력증폭기)

  • Kim, Sun-Young;Seo, Chul-Hun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.12
    • /
    • pp.7-12
    • /
    • 2008
  • In this paper, a highly efficiency power amplifier is presented for multi-band antenna system. The class F power amplifier operating in dual-band designed with one LDMOSFET. An operating frequency of power amplifier is 900 MHz and 2.14 GHz respectively Matching networks and harmonic control circuits of amplifier are designed by using the unit cell of composite right/left-handed(CRLH) transmission line(TL) realized with lumped elements. The CRLH TL can lead to metamaterial transmission line with the dual-band holing capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Because the control of all harmonic components for high efficiency is very difficult, we have controled only the second- and third-harmonics to obtain the high efficiency with the CRLH TL. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency.

A Filter Synthesis Method without Bandwidth Reduction for Dual-Band Filters Based on Coupled Lines (결합 선로 이중 대역 필터의 대역폭이 줄지 않는 설계 방법)

  • Lee, Seung-Ku;Ha, Jung-Je;Lee, Yong-Shik
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.3
    • /
    • pp.245-252
    • /
    • 2010
  • This paper proposes an improved filter synthesis method for dual-band filters based on coupled lines loaded with shunt stubs. The conventional design method relies on equality of the response of the conventional single-band filter and its dual-band counterpart at two frequencies. On the other hand, the proposed method is based on equivalence of the propagation constants and the image impedances of the two filters. Therefore, the proposed method does not suffer from bandwidth reduction phenomena, which requires complex compensating process in the conventional method. Also, the alternative design parameters provided by the demonstrated method enable to construct dual-band filters with more flexibility. For experimental verification, a Chebyshev type dual-band filter with center frequencies at 1 GHz and 3.5 GHz is designed and fabricated. The measured results are in excellent agreement with the full-wave simulated results.

Design of a Dual-mode Annular Ring Antenna with a Coupling Feed (커플링 급전을 이용한 이중 모드 Annular Ring 안테나 설계)

  • Kim, Jae-Hee;Woo, Dae-Woong;Park, Wee-Sang
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.4
    • /
    • pp.351-356
    • /
    • 2009
  • A dual-mode annular ring antenna for both global positioning system(GPS) and satellite digital multimedia broad-casting(DMB) is designed. The proposed antenna consists of a coupling feed line and four slots on the annular ring patch. The gap between the feed line and the annular ring patch is used for an input impedance matching, and the slot length is used for adjusting the resonant frequency of the $TM_{21}$ mode at the DMB frequency. The antenna was fabricated and measured. The experimental results show that the antenna resonants at the GPS and DMB frequencies with suitable bandwidths, and had a broadside radiation pattern at the GPS band and a conical beam radiation pattern at the DMB band.

Dual-Band Stop Filter Using Metamaterial TLs (Metamaterial 전송선을 이용한 이중 대역 저지 필터)

  • Oh, Hee-Seok;Nam, Sang-Wook
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.20 no.2
    • /
    • pp.124-128
    • /
    • 2009
  • This raper proposes a dual-bandstop filter, which is based on a metamaterial transmission line using the composite right/left-handed (CRLH) and dual composite right/left-handed (D-CRLH) structures. The metamaterial structure is used for miniaturization and dual-bandstop operation at the TDMB frequency range (195 MHz) and DVB-T/H frequency range (670 MHz). The size of the proposed filter is $30{\times}15\;mm$, and the -10 dB bandstop fractional bandwidth is approximately 73 % and 50 % at each frequency, respectively.

Design of Metamaterial-Inspired FSS Sub-Reflector for a Dual-Band Offset Cassegrain Reflector Antenna (이중대역 오프셋 카세그레인 반사판 안테나용 메타재질구조 모사 주파수 선택표면 부반사판 설계)

  • Kim, Hyeonsu;Kahng, Sungtek;Khattak, M. Kamran;Jeon, Jinsu;Park, Jeong-hoon
    • Journal of Satellite, Information and Communications
    • /
    • v.10 no.2
    • /
    • pp.34-39
    • /
    • 2015
  • In this paper, a design of an offset Cassegrain antenna is proposed for Ku and Ka dual-band without increasing the antenna size. For Efficiency of computation and implementation, the frequency selectivity surface (FSS) of reflecting the Ka-band signal and passing the Ku-band is provided for the sub-reflector instead of the main reflector. The proposed FSS hyperboloid sub-reflector is the periodic structure of a unit cell comprising octagon metal rings embedded in the multiple layers. The proposed design is verified for 19 GHz and 45 GHz bands by the use of precise electromagneitc-field simulations.

Circular Polarization Patch Antenna with GPS and GLONASS Stopband for Satellite Communication (GPS, GLONASS 저지대역을 갖는 위성통신용 원편파 패치안테나)

  • Kim, Joo-Suk;Kim, Gue-Chol
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.13 no.1
    • /
    • pp.245-252
    • /
    • 2018
  • In this paper, the dual band circular polarization patch antenna was designed by using band rejection characteristics of CSRR structure for geostationary satellites. A quadrangular CSRR structure was etched on the ground at the rear of the patch antenna's feed to obtain band rejection characteristics in between the receiving frequency band(1525~1559MHz) and transmission band(1626.5~1660.5MHz), and the corner of the patch antenna was truncated to enable circular polarization. It was confirmed that the resonant frequency of the patch antenna differs according to the size anc location of the CSRR and cirular polarization characteristics with simulation and measurement results. Measurement results shows the gain of about 0.2dB and 1.5dB in the TX and RX band.

Design of A 2.7-V MMIC SiGe HBT Up-converter and Variable Gain Amplifier for Cellular Band Applications (Cellular 주파수 대역 2.7-V MMIC SiGe HBT 상향 주파수 혼합기와 가변이득 증폭기의 설계)

  • 박성룡;김창우
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2000.11a
    • /
    • pp.146-149
    • /
    • 2000
  • SiGe HUT뜰 이용하여 Cellular 주파수 대역(824-849 MHz)에서 MMIC 상향 주파수 혼합기와 가변이득 증폭기를 설계하였다. 동작 전압은 2.7 V 이며, 이중평형 구조의 상향 주파수 혼합기는 12 dB의 변환이득, -0.6 dBm의 1dB 이득압축 출력전력, 30 dB 이상의 LO-RF 단자 격리도 특성, 1.25의 LO-VSWR. 1.34의 RF-VSWR을 가지며, 상호컨덕턴스형 가변이득 증폭기는 35 dB의 최대 선형이득, 13 dBm의 1dB 이득압축 출력전력, 42dB의 가변이득, 23dB의 3차 상호변조 교점 출력전력(OIP$_3$), 1.27의 입력 VSWR, 1.1의 출력 VSWR 특성을 보인다.

  • PDF