• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.695-698
• /
• 2010

The incidence of Anthracnose causing severe damage to the foliage and fruit in watermelon has increased in some major watermelon producing areas in Korea. To develop anthracnose resistant line, 'AU-Producer' having resistant gene to anthracnose was selected from germplasm and crossed with high quality line '920533'. Following the initial cross, backrossing and disease screening were performed to select resistant lines that produced high yields with excellent quality fruit. As a results of these procedure, a mid maturing watermelon line, 'Hangyeol' with resistance to anthracnose (Colletotrichum orbiculare) race 1 and 3 was developed at the National Institute of Horticultural and Herbal Science, Rural Development Administration (RDA). It has red flesh and commonly produces fruit with clear stripes on skin between 5.3 to 10.1 kg. Average soluble solid contents are ranged from 9.8 to 11.8$^{\circ}$Bx. The yield and quality of 'Hangyeol' is comparable to or better than those harvested from the popular commercial cultivars. The achievement of this experiment could contribute to provide the resistant parents in an anthracnose resistance breeding program in watermelon.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.208-213
• /
• 1998

Silicidation of the Co/Ti/Si bilayer system in which Ti is used as epitaxy promoter for $CoSi_2$has recently received much attention. The Co/Ti bilayer on the spacer oxide of gate electrode must be thermally stable at high temperatures for a salicide transistor to be fabricated successfully. In the $SiO_2$substrate was rapid-thermal annealed. The Sheet resistances of the Co/Ti bilayer increased substantially after annealing at $600^{\circ}C$, which is due to the agglomeration of the Co layer to reduce the interface energy between the Co layer and the $SiO_2$substrate. In the bilayer system insulating Ti oxide stoichiometric Ti oxide and silicide were not found after annealing.

• Korean Journal of Materials Research
• /
• v.8 no.9
• /
• pp.791-796
• /
• 1998

self-aligned silicide(salicide)제조시 CoSi2의 에피텍셜 성장을 돕기 위하여 Co와 Si 사이에 내열금속층을 넣은 Co/내열금속/Si의 실리사이드화가 관심을 끌고 있다. Hf 역시 Ti와 마찬가지로 이러한 용도로 사용될 수 있다. 한편, Co/Hf 이중층 salicide 트랜지스터가 성공적으로 만들어지기 위해서는 spacer oxide 위에 증착된 Co/Hf 이중층이 열적으로 안정해야 한다. 이러한 배경에서 본 연구에서는 SiO2기판 위에 증착한 Co 단일층과 Co/Hf 이중층을 급속열처리할 때 Co와 SiO2간의 계면과 Co/Hf와 SiO2간의 계면에서의 상호반응에 대하여 조사하였다. Co 단일층과 Co/Hf 이중층은 각각 $500^{\circ}C$와 $550^{\circ}C$에서 열처리한 후 면저항이 급격하게 증가하기 시작하였는데, 이것은 Co층이 SiO2와의 계면에너지를 줄이기 위하여 응집되기 때문이다. 이 때 Co/Hf의 경우 열처리후 Hf에 의하여 SiO2 기판이 일부 분해됨으로써 Hf 산화물이 형성되었으나, 전도성이 있는 HfSix 등의 화합물은 발견되지 않았다.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.152-162
• /
• 2016

Electrical resistivity tomography (ERT) is a technique to reconstruct the internal resistivity distribution using the measured voltages on the surface electrodes. ERT inverse problem suffers from ill-posedness nature, so regularization methods are used to mitigate ill-posedness. The reconstruction performance varies depending on the type of regularization method. In this paper, an interacting dual-mode regularization method is proposed with two different regularization methods, L1-norm regularization and total variation (TV) regularization, to achieve robust reconstruction performance. The interacting dual-mode regularization method selects the suitable regularization method and combines the regularization methods based on computed mode probabilities depending on the actual conditions. The proposed method is tested with numerical simulations and the results demonstrate an improved reconstruction performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.600-608
• /
• 2022

This study investigates the effect of layered double hydroxide (LDH) on the healing performance of self-healing concrete by assessing the chloride penetration resistance of self-healing cement mortars using electrical chloride ion migration-diffusion test. Test results show that both mortars containing healing materials only and mortars containing healing materials and Ca-Al LDH together mostly had higher migration-diffusion coefficients right after cracking, but the migration-diffusion coefficients decreased more than that of OPC with increasing healing ages, and thus, they yielded higher healing capacities than OPC. Also, mortars containing Ca-Al LDH together with healing materials showed higher reduction of their migration-diffusion coefficients, and thus, higher healing capacities than mortars containing healing materials only. This suggests that as the self-healing product increases on the crack surface, the binding of chloride ions by LDH inside the crack increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.400-413
• /
• 2016

The horizontal shear capacity when the flange of a steel girder is replaced with 80 MPa concrete is important for its structural safety. In this study, 6 specimens with different interface conditions were designed and fabricated based on the Limit State Design Code on Korean Highway Bridges and static tests were performed to measure the horizontal shear capacity. Not only the resistance factors of the stud shear connector, concrete and reinforcement, but also the surface conditions of the casing concrete and spacing of the horizontal shear reinforcements were used as the experimental variables. The experiments showed that the interfaces between the steel girder and the concrete flange have stronger joint performance than those between the concrete flange and deck slab. To ensure the composite action in the plastic zone, the conservative horizontal shear reinforcement is more important than the roughness in the concrete face.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.85-90
• /
• 2008

Effects of the emitter degeneration on linearity have been investigated in SiGe HBT double-balanced up-converters with the Gilbert-cell structure. The emitter-coupled degeneration resistors have been optimized for high P1-dB and IP3 through the nonlinear harmonic-balance simulation. Two types of up-converter MMICs fabricated in $0.35{\mu}m$ Si-BiCMOS process were measured to verify the simulation results. The up-converter without the degeneration resistors produces a P1-dB of -13 dBm with an OIP3 of 3.7 dBm, while the up-converter with the degeneration resistors produces a P1-dB of -10 dBm with an OIP3 of 8.7 dBm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.157-166
• /
• 1996

This paper presents the optimum termination method of a TEM Cell, which utilizes hybrid distributed termination resistor array networks. Current stream on the septum, and on the terminal end of a TEM Cell is analyzed by numerical analysis. By circuit analysis, the optimum resistor array network is designed based on the result of the analysis, which assures efficient power dissipation, and current stream traveling straight and uniform. Thermovision photos were taken for comparing the conventional termination network on which each resistor is arranged at regular intervals, with the suggested optimum termination network on which each resistor is arranged for current distribution. The comparison of the results of thermovision photos shows a good agreement with those obtained by numerical analysis.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.76-76
• /
• 2003

제 3세대로 불리우는 차세대 발전시스템인 고체산화물 연료전지(Solid Oxide Fuel Cell, SOFC)는 연료전지 가운데 발전효율이 가장 높고, NOx와 SOx의 발생이 없는 무공해 청정에너지 발전 시스템으로 많은 연구가 진행되고 있다. 이중 원통형 구조는 전력밀도가 평판형 구조에 비해 다소 떨어지나 반응기체의 밀봉이 쉽고, 기계적 강도가 높으며, 열응력에 대한 저항성이 높아 스텍제작이 비교적 용이하며 장기 운전이 가능하다는 장점이 있으며, 평판형 구조의 경우는 전류의 흐름이 구성요소의 면에 수직방향으로 흐르므로 전력밀도가 높은 장점이 있으나 가스의 밀봉이 어렵고, 기계적 강도나 열응력에 대한 저항성이 높은 단점을 갖고 있다. 본 연구에서는 원통형 구조와 평판형 구조의 상호 장점을 보완하여 기존의 원통형의 구조를 최적화하여 개선한 연료극 지지체식 Flat-Tube형 고체산화물 연료전지의 제조와 특성에 대한 연구를 발표하고자 한다.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.198-201
• /
• 2009

Bacterial wilts, caused by Ralstonia solanacearum, is a very destructive disease to tomato plants (Solanum lycopersicum) in Korea. Selection of resistant cultivar is the best way to prevent or reduce the occurrence of this disease. Thirty-nine tomato cultivars, twenty-one cherry tomato cultivars and thirteen rootstock tomato cultivars were inoculated with Ralstonia solanacearum, to evaluate tomato cultivars for resistance against bacterial wilts. Thirty-seven cultivars were highly susceptible to bacterial wilts and 61-100% of their whole tissue became wilted within 10 days after inoculation. Twenty-four cultivars showed moderate resistance and twelve were resistant to bacterial wilts. In an evaluation of 73 major commercial cultivars, 'Lilyance', 'TP-7', 'Choice', 'Dadaki', 'Akiko', 'Redstar', 'Match', 'B-blocking', 'Magnet', 'Support', 'Friend' and 'Special' were found to have a high level of resistance to bacterial wilts of tomatoes.