• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.105-114
• /
• 2007

The most advanced oxidation processes (AOPs) are based on reactivity of strong and non-selective oxidants such as hydroxyl radical (${\cdot}OH$). Decomposition of typical DNAPL chlorinated compounds (TCE, PCE) using various advanced oxidation processes ($UV/Fe^{3+}$-chelating agent/$H_2O_2$ process, $UV/H_2O_2$ process) was approached to develop appropriate methods treating chlorinated compound (TCE, PCE) for further field application. $UV/H_2O_2$ oxidation system was most efficient for degrading TCE and PCE at neutral pH and the system could remove 99.92% of TCE after 150 min reaction time at pH 6($[H_2O_2]$ = 147 mM, UVdose = 17.4 kwh/L) and degrade 99.99% of PCE within 120 min ($[H_2O_2]$ = 29.4 mM, UVdose = 52.2 kwh/L). Whereas, $UV/Fe^{3+}$-chelating agent/$H_2O_2$ system removed TCE and PCE ca. > 90% (UVdose = 34.8 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 147 mM) and 98% after 6hrs (UVdose = 17.4 kwh/L, $[Fe^{3+}]$ = 0.1 mM, [Oxalate] = 0.6 mM, $[H_2O_2]$ = 29.4 mM), respectively. We improved the reproduction system with addition of UV light to modified Fenton reaction by increasing reduction rate of $Fe^{3+}$ to $Fe^{2+}$. We expect that the system save the treatment time and improve the removal efficiencies. Moreover, we expect the activity of low molecular organic compounds such as acetate or oxalate be effective for maintaining pH condition as neutral. This oxidation system could be an economical, environmental friendly, and practical treatment process since the organic compounds and iron minerals exist in nature soil conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.111-121
• /
• 2010

Purpose: This 3D-FEA study was performed to investigate the influence of marginal bone loss pattern around the implant to the stress distribution. Material and methods: From the right second premolar to the right second molar of the mandible was modeled according to the CT data of a dentate patient. Teeth were removed and an implant ($\Phi\;4.0{\times}10.0mm$) was placed in the first molar area. Twelve bone models were created; Studied bone loss conditions were horizontal bone loss and vertical bone loss, assumed bone loss patterns during biologic width formation, and pathologic vertical bone loss with or without cortification. Axial, buccolingual, and oblique force was applied independently to the center of the implant crown. The Maximum von Mises stress value and stress contour was observed and von Mises stresses at the measuring points were recorded. Results: The stress distribution patterns were similar in the non-resorption and horizontal resorption models, but differed from those in the vertical resorption models. Models assuming biologic width formation showed altered stress distribution, and weak bone to implant at the implant neck area seams accelerates stress generation. In case of vertical bone resorption, contact of cortical bone to the implant may positively affect the stress distribution.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.5
• /
• pp.470-478
• /
• 2008

Statement of problem: Use of all-ceramic prostheses fabricated with CAD/CAM systems is increasing in the dentistry. Marginal fidelity in production of all-ceramic restoration has important clinical implications and is a key consideration issue in CAD/CAM production as well. Purpose: The objective of this study was to analyse marginal fidelities of $Procera^{(R)}$ Allceram Crown. Material and methods: On 56 patients treated with $Procera^{(R)}$ system Allceram Crown at Dankook Dental Hospital, marginal discrepancies of 101 abutments were measured by stereomicroscope at coping and final restoration stages. Paired t-test and one-way analysis of variance on marginal discrepancy data were conducted to determine the presence of significant differences between measurement and measuring point stages. Results: Marginal discrepancies of final restoration ($45.82{\pm}30.84\;{\mu}m$) were lower than alumina coping ($53.84{\pm}38.83\;{\mu}m$). Furthermore, the differences were found to be statistically significant at 95% confidence level. Anterior marginal discrepancies were lower than posterior marginal discrepancies, but they were not statistically significant. Lingual marginal discrepancies were higher than other measurement sites, and the differences were found to be statistically significant at 95% confidence level. Conclusion: Within the conditions of this study, marginal fidelities of $Procera^{(R)}$ Allceram Crown were acceptable, and after porcelain build-up, marginal fitness improved over alumina coping. More careful scanning is needed for better results.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.2
• /
• pp.160-165
• /
• 2012

A field study was conducted at Miryang in 2011 to evaluate differential sensitivity of six rice cultivars, three Indica${\times}$Japonica rice (long grain, cv. Hanareumbyeo, Hanareum2, Dasanbyeo) and three Japonica rice (short grain, Nampyung, Ilpumbyeo and Junamjosaeng) cultivars, to benzobicyclon, mesotrione+pretilachlor (MP) and butachlor (control) in transplanting rice and their treatment influences on rice yield. All Indica${\times}$Japonica rice cultivars exhibited susceptible to both benzobicyclon and MP as reflected by higher visual injury and carotenoid biosynthesis inhibition when compared with Japonica rice cutlivars. The percentage of foliar chlorosis of Indica${\times}$Japonica rice was only 0.9~4.7% for benzobicyclon at 13 days after treatment (DAT) and 30.3~64.4% for MP at 5DAT but it increased rapidly to 88.4~91.2% at 12~20DAT. However, most of the Japonica cultivars are tolerant to bezobicyclon and MP. There was no visible leaf chlorosis but carotenoid biosynthesis was slightly inhibited. Based on relative carotenoid content reduction of benzobicyclon and MP to butachlor, the Indica${\times}$Japonica rice showed 4.6~15.6 fold higher compared with the Japonica rice. The heading date of the injured rice plant was delayed by 3 days and panicle number per square meter and ripened grain ratio were reduced as compared with the control treatment of butachlor. Rice yield of the Indica${\times}$Japonica rice cultivars treated with benzobicyclon and MP was reduced by 7~10%, 3~5%. respectively. The result indicates that rice cultivars vary in tolerance to HPPD-Inhibiting herbicides and Indica${\times}$Japonica rices were more susceptible than the Japonica rices to MP and benzobicyclon. Rice yield of the Indica${\times}$Japonica rices was also significantly reduced by the those herbicide treatments.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.1
• /
• pp.7-12
• /
• 2006

Purpose: This is for the purpose to help the bill related to technologists be systematic and unitary by carefully analyzing a legislation, an enforcement ordinance, and enforcement regulations in the connection with the radiological worker and the radiation workers from the law and regulations related to technologists. Materials and Methods: Concerning technologists, a legislation, an enforcement ordinance, and enforcement regulations for a sort of medical technician, regarding the radiological worker, the rules of diagnosis radiation equipment safety management, and concerning the radiation workers, atomic energy law, an enforcement ordinance and enforcement regulations were gathered, compared with one another, and analyzed. Results: Among technologists, in the case of working in the department of diagnosis radiation, the title 'Radiological Worker' is used by the Medical Service Law, and in the case of working in the department of radiation tumors or the one of nucleus medicine, the title 'Radiation Workers' is used by the Atomic Energy Law. Conclusion: Besides the technical term that is used by characteristic tasks, unification of the terms that can be used in common is necessary for sure. And when a legislation, an enforcement ordinance, enforcement regulations, and notification, things like that in the radiation field are amended, certainly they should be done by mutual agreement through negotiation between the organization related to radiation and the governmental organization.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.345-352
• /
• 2012

As the breast cancer rate is increasing fast in Korean women, people pay more attention to mammography and number of mammography have been increasing dramatically over the last few years. Mammography is the only means to diagnose breast cancer early, but harms caused by radiation exposure shouldn't be overlooked. Therefore, it is important to calculate the radiation dose being absorbed into the breast tissue during the process of mammography for a protective measure against radiation exposure. Because it is impossible to directly measure the radiation dose being absorbed into the human body, statistical calculation methods are commonly used, and most of them are supposed to simulate the interaction between radiation and matter by describing the human body internal structure with anthropomorphic phantoms. However, a simulation using Geant4 Code of Monte Carlo Method, which is well-known as most accurate in calculating the absorbed dose inside the human body, helps calculate exact dose by recreating the anatomical human body structure as it is through the DICOM file of CT. To calculate the absorbed dose in the breast tissue, therefore, this study carried out a simulation using Geant4 Code, and by using the DICOM converted file provided by Geant4, this study changed the human body structure expressed on the CT image data into geometry needed for this simulation. Besides, this study attempted to verify if the dose calculation of Geant4 interlocking with the DICOM file is useful, by comparing the calculated dose provided by this simulation and the measured dose provided by the PTW ion chamber. As a result, under the condition of 28kVp/190mAs, the Difference(%) between the measured dose and the calculated dose was found to be 0.08 %~0.33 %, and at 28 kVp/70 mAs, the Difference(%) of dose was 0.01 %~0.16 %, both of which showed results within 2%, the effective difference range. Therefore, this study found out that calculation of the absorbed dose using Geant4 Simulation is useful in measuring the absorbed dose in the breast tissue for mammography.

• Journal of Life Science
• /
• v.18 no.6
• /
• pp.796-803
• /
• 2008

Mutations in the APP gene lead to enhanced cleavage by ${\beta}-$ and ${\gamma}-secretase$, and increased $A{\beta}$ formation, which are closely associated with Alzheimer's disease (AD)-like neuropathological changes. Recent studies have shown that exercise training can ameliorate pathogenic phenotypes ($A{\beta}-42$, BDNF, GLUT-1 and HSP70) in experimental models of Alzheimer's disease. Here, we have used NSE/APPsw transgenic mice to investigate directly whether exercise training ameliorates pathogenic phenotypes within Alzheimer's brains. Sixteen weeks of exercise training resulted in a reduction of $A{\beta}-42$ peptides and also facilitated improvement of cognitive function. Furthermore, GLUT -1 and BDNF proteins produced by exercise training may protect brain neurons by inducing the concomitant expression of genes that encode proteins (HSP-70) which suppress stress induced neuron cell damages from APPsw transgenic mice. Thus, the improved cognitive function by exercise training may be mechanistically linked to a reduction of $A{\beta}-42$ peptides, possibly via activation of BDNF, GLUT-1, and HSP-70 proteins. On the basis of the evidences presented in this study, exercise training may represent a practical therapeutic management strategy for human subjects suffering from Alzheimer's disease.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.317-322
• /
• 2005

This study was conducted to improve the efficiency of embryo recovery and to establish the protocols of superovulation in Holstein cows. Sixteen Holstein cows were used the test the efficacy of three superovulation regimens using Folltropin. In the case of regimen 1, CIDR plus with E2 capsule was inserted in cows at the random stage of estrous cycle and the total of 400 mg Folltropin V was adminstered twice a day for 4 days(Folltropin V group). In regimen 2, CIDR was inserted and 3.0 mg estradiol benzoate was administered i.m. next day and the total of 400 mg Folltropin was adminstered twice a day for 4 days(Folltropin V+EB group). For regimen 3, CIDR insertion was same as in the regimen 2 and the total of 400 mg Folltropin diluted with $10\%$ PEG 8,000 was administered once(Folttropin V+PEG 8,000 group). In all the regimens, CIDR were removed on 12th day and 45 mg dinoprost was administered i.m. simultaneously. The heat detected donors were administered 200 ug LH-RH and inseminated twice with 2 straws of frozen semen 12 hours apart. Embryo were collected using Foley catherter in each uterine homs on 6${\~}$8 days after inseminations. The evaluation of collected embryos were according to the IETS manual. The CL responses according to the superovulation treatments were 5.8, 20.6, 24.0 in the Folltropin V, Folltropin+EB and Folltropin V+PE 8,000 groups, respectively and there were significant different among the treatments(p<0.01). Transferable embyos collected were 3.6$\pm$2.4, 3.3$\pm$l.8 and 2.8$\pm$2.3, in the Folltropin V, Folltropin+EB and Folltropin V+PE 8,000 groups, respectively. Degenerated and unfertilized embryos in regimen 2 and 3 than regimen 1. These results indicates that superovulation treatments with both multiple injections and a single injection using PEG of Folltropin combined with CIDR insertion at the random stage of estrus cycle can be used to produce Holstein embryos.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.664-671
• /
• 2019

This study was conducted to investigate the environmental impact of the construction of the Yeongju Dam, located near the upper stream of the Nakdong River, on benthic macroinvertebrates. The investigation was conducted four times from 2015 to 2016 and the composition of the benthic macroinvertebrate fauna from the four surveyed sites was compared. After the dam construction, the number of benthic macroinvertebrate species decreased and the species composition ratio of the E.P.T taxa(Ephemeroptera, Plecoptera, and Trichoptera) decreased, which favored the previous environment and the large riverbed structure. However, the species composition ratio of the O.C.H taxa (Odonata, Coleoptera, and Hemiptera), which favored the reservoir environment, increased. For the pattern of changes in the functional habitat groups, the proportion of 'Clinger(CL)' taxa decreased and the 'Burrower(BU), Climber(CB), Sprawler(SP), Swimmer(SW)' taxa increased in all surveys after the dam construction. A cluster stability comparison showed that the 'Stability Group II' species of St.2 and St.3 showed a drastic decrease. The average Benthic Macroinvertebrate Index(BMI) of all the survey sites in 2016 was lower than that in 2015. This research confirmed the temporal and spatial changes in the habitat type and community structure of the benthic macroinvertebrates resulting from the dam construction.