• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.394-401
• /
• 2004

This paper presents a study on the analysis of impact responses taking into account sensor dynamics. The contact force between impacting bodies is modelled by using Hertz force-displacement law and linear damping function. Since the real impact force and acceleration at the contact surface of two colliding bodies are measured indirectly by the sensors, the measured outputs can be a little different from the real impact responses. Therefore, in this study, the importance of consideration of sensor dynamics in the impact problems of two colliding bodies is emphasized. In order to verify the appropriateness of the proposed contact force model, the drop type impact test using two kinds of sensors is carried out. Through the numerical analysis and experiment, the effect of sensor dynamics and characteristics on the contact force model is investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.875-880
• /
• 2012

According to the fixation detailed drawing and lightweight anger tendency of the product the vibration control of precision equipments is essential and establishes under the equipments. so It is important to know vibration characteristics of vibration isolator. For this reason the accelerometer attaches in vibration isolator and measures an acceleration response. The acceleration response which is measured will lead double integral and will be able to predict a displacement of vibration isolator. However, in compliance with the effect of the accelerometer can not be accurately. From this paper, mass, damping ratio and natural frequency of the accelerometers by changing the vibration isolator to predict the acceleration response and the results were compared.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1591-1592
• /
• 2015

분기기는 선로가 분기되거나 또는 교차하는 지점에 설치되어 열차의 이동 방향을 안전하게 변경하는 역할을 한다. 그러나, 운영 노선 및 동작 환경에 따라 비정상적인 힘이 분기기에 발생할 경우, 정확한 진단 및 검측을 실시할 수 없는 단점이 있다. 본 논문은 국내에서 사용중인 MJ81 전기선로전환기의 전환기능과 쇄정기능의 특성 분석을 통해 기존에 사용된 분기기 전환력 측정의 문제점을 제시한 후, 이를 해결하기 위한 센서 활용 분기기 전환력 측정 방법을 제시한다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.1016-1021
• /
• 2005

A piezoresistive pressure sensor using a silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micromachining technique using porous silicon ething. The width, length and thickness of the beam were 120${\mu}m$, 600${\mu}m$ and 7${\mu}m$, respectively and the thickness of the silicone rubber membrane was 40${\mu}m$. By the fusion of silicon beam and silicone rubber membrane, the mechanical strength of the pressure sensor could be highly improved due to smaller shear stress. The effectiveness of the sensor was confirmed through an experiment and FEM simulation in which the pressure sensor was characterized.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.930-935
• /
• 2006

To address the need for new intelligent sensing of systems, this study presents a novel strain sensor based on peizoresistivity of carbon nanotube (CNT) and its nanocomposites. Fabrication and characterization of the carbon nanocomposite material are discussed and an electrical model of the CNT strain sensor was derived based on electrochemical impedance spectroscopy analysis and strain testing. The dynamic response of the sensor on a vibrating beam was simulated using numerical analysis and it was compared with experimental test. The simulation showed good agreement with the strain response of the actual sensor.

• Journal of Sensor Science and Technology
• /
• v.15 no.1
• /
• pp.47-52
• /
• 2006

This paper describes the design, fabrication and characteristics of a buckling microvalve using a MCA (multilayer ceramic actuator). The mechanical and fluidic analysis are done by finite element method. The designed structure is normally closed microvalve using buckling effect, which is consist of three separate structures; a valve seat die, an actuator die and a small piezoelectric actuator. The flow rate of the fabricated MCA valve was 0-8.13 ml/min at the applied pressure of 0-50 kPa. Maximum non-linearity was 2.24 % FS at a duty cycle of 50 %. The maximum pressure was 230 kPa and the leak rate was $3.03{\times}10^{-8}\;Pa{\cdot}m^{3}/cm^{2}$ at a supply voltage of 100 V.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.846-856
• /
• 2001

An experimental study has been made to investigate the effect on wake flow and vortex shedding frequency by vortex stabilizer in Karman vortex type air flow sensor. The conditions investigated include 3 types of shapes and 3 types of separation distances of the vortex stabilizer. The phase averaged technique and smoke-wire flow visualization method are used to understand the detail information. The rolling up position of shear layer is fixed by the influence of the vortex stabilizer. Especially, the convex type vortex stabilizer has shown the more stable repeatability and linearity regarding the vortex shedding frequency compared to the other types.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.59-64
• /
• 2001

The necessity of six axis force-torque sensors have been increased in the field of automatic assembly, polishing and deburing using robotic manipulator recently. This paper presents a simple and compact elastic structure design of the six axis force-torque sensor with a cross-shaped structure and the expected deflection value was induced by theoretical method to design a six axis force-torque sensor and then this theoretical method was verified by comparing with the results using the Finite Element Method(FEM).

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.63-64
• /
• 2007

The Underwater Wireless Sensor Networks (UWSN) consists of sensor nodes equipped with limited sensing coverages, energy resources and communication capacity. Hence, the deployment and movement algorithm is a key issue that needs to be organized in order to improve the sensing efficiency of the networks. In this paper, we use a Queen problem and Knapsack problem to prevent the reiteration phenomenon of sensors, to guarantee improvement sensing coverage and efficiency in the 3D UWSN.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.256-259
• /
• 2017

SENT (single edge nibble transmission) is a serial communication protocol between automotive sensors and ECU (electronic control unit). SENT exploits digital waveform, so it has a simple and cheap architecture without transceiver circuits. Usually it is exploited as an embedded communication interface in the sensors. In this paper, a SENT interface was designed in Verilog HDL, fully complying with SAE J2716. It was implemented in FPGA, and verified on a test board. When it was synthesized, the gate count is about 2,500 gates in 0.18um technology.