• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.327-334
• /
• 2004

In this paper, a triplexer for Advanced Mobile Phone Service(AMPS), United States-Personal Communication Services(US-PCS), and Global Positioning System(CPS) is designed using L and C lumped elements. The triplexer shows the insertion loss of 0.6 ㏈, 1.1 ㏈, and 1.6 ㏈ for AMPS, US-PCS, and GPS bands, respectively. Also, it shows the attenuation characteristic of less than 18 ㏈, and the VSWR of less than 2.0 through the all pass-band.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.342-347
• /
• 2003

It is essential to develop an algorithm for the estimate of link travel velocity and for the supply and control of travel information in the context of intelligent transportation information system. The paper proposes the fuzzy logic based prediction of link travel velocity. Three factors such as time, date and velocity are considered as major components to represent the travel situation. In the fuzzy modeling, those factors were expressed by fuzzy membership functions. We acquire position／velocity data through GPS antenna with PDA embedded probe vehicles. The link travel velocity is calculated using refined GPS data and the prediction results are compared with actual data for its accuracy.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.245-256
• /
• 1995

Rugate filters of inhomogeneous refractive index were designed using the Fourier transform and the effect of reflectance, stop bandwidth, optical thickness, and Q function on the rugate filter was investigated. An iterative correction process using a merit function was employed to fit an initial design to the target spectrum. Three Q functions derived by Sossi, Bovard, and Fabricius, respectively, were compared in terms of the number of iteration, merit function, and optimum optical thickness. The result shows that after a number of iterations the Q functions by Bovard and Fabricius produce high rejection rugate filters closer to the target spectrum than the Sossi's Q function and the optimal optical thickness is determined by the stop-band width of the rugate filter. ilter.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.155-159
• /
• 2010

홍수 예 경보 및 강우-유출의 관계에 의한 홍수량 산정은 수자원 계획과 관리에 있어 중요한 요소라 할 수 있다. 이러한 강우-유출의 관계를 표현할 수 있는 모형은 최근 분포형 모형으로 발전하게 되었지만, 유역수문 모형의 비약적인 발전과는 다르게 강우자료는 점 강우량을 유역내 평균강우량으로 산정하는 것이 일반적이다. 그러나, 실제 유역에서 강우의 분포는 다양한 이동속도와 방향을 가지고 있기에 유역 내 평균강우량이 발생한다고 가정하기에는 어려운 상황이 많다. 본 연구에서는 격자로 분할된 섬진강 유역에 임의로 생성한 중앙집중형 강우와 2009년 7월 12일부터 2009년 7월 15일까지의 레이더 강우 자료를 실제 이동방향과 수직된 나머지 세 방향으로 각각 공간분포 시켰으며, 강우의 이동과 공간분포를 함께 고려할 수 있는 준분포형인 Modified Clark 방법으로 유출량을 모의하였다. 실측된 유출량 및 강우이동에 대하여 모형을 검 보정한 후 직각된 4방향성으로 강우를 이동시켜 유역출구의 홍수량 변화를 비교 분석하였다. 그 결과 강우이동형태에 따라 첨두유량이 변화함을 알 수 있었으며, 가상의 이동강우 및 레이더 강우가 하류에서 상류로의 이동보다 상류에서 하류로 이동하는 특성이 유역출구에서의 첨두유량이 크고 지체시간을 지속시킴을 알 수 있었다. 본 연구를 통해 강우이동 특성을 고려할 수 있는 레이더 강우를 이용함으로써 홍수 유출특성의 변화 정도에 대한 신뢰도를 높일 수 있을 것으로 기대한다.

• Land and Housing Review
• /
• v.1 no.1
• /
• pp.27-34
• /
• 2010

The energy consumption of residential sectors is given a sizable portion in total energy consumption. So, improvement of building performance can be as a part of principal energy strategy. For this reason, an evaluation tool for estimation of energy consumption was developed and supportive policies were considered in this study. In particular, energy saving technology were examined to practice the green home project, among them 7 items were selected as a factor for estimating energy consumption. In addition, to the simulation study on energy consumption, heating load, hot water demand and electric consumption was also studied with actual measured value. Further more, several supportive policies were discussed to encourage green home project in Korea.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.27-31
• /
• 2003

Underwater acoustic navigation systems are classified into three systems: ultra-short baseline (USBL), short baseline (SBL), and long baseline (LBL). Because the USBL system estimates the angle of a submersible, the estimation error becomes large if the submersible is far from the USBL transducer array mounted under a support vessel. SBL and LBL systems estimate submersible's location more accurately because they have wider distribution of measuring sensors. Especially LBL systems are widely used as a navigation system for deep ocean applications. Although it is most accurate system it still has estimation errors because of noise, measurement error, refraction and multi-path of acoustic signal, or wrong information of the distributed transponders. In this paper the estimation error of the LBL system are analyzed from a point of sensitivity. It is assumed that the error exists only in the distance between a submersible and the transponders. For this purpose sensitivity of the estimated position with respect to relative distances between them is analyzed. The result says that estimation error is small if the submersible is close to transponders but not near the ocean bottom.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.138.1-138.1
• /
• 2012

자기 구름은 자기 구조를 가지고 방출된 CME로 지구 자기장에 영향을 주는 중요한 원인 중 하나이다. 지구 자기장의 교란으로 발생하는 지자기 활동은 K 지수로 표현되는데 우주기상을 연구하는데 기본 자료로 활용된다. 따라서 자기 구름은 우주기상을 연구하는데 필요한 자료라 할 수 있다. 기존에 Lynch et al.(2005), Huttunen et al.(2005), Lepping et al.(2006), Feng et al.(2007) 등이 만든 자기 구름 리스트가 있지만 자기 구름에 적합하지 않는 이벤트가 적지 않게 포함되어 있어 이벤트를 지자기 활동 연구에 활용하기에 어려움이 있었다. 이 연구에서는 우리만의 자기 구름 기준을 정하고, 이 기준과 실린더 모델을 이용해 새로운 자기 구름 리스트를 완성하였다. 우리가 정한 자기 구름 기준은 (1)자기장의 벡터 성분이 천천히 회전하고 (2)자기장의 세기가 평균보다 세며 (3)자기 구름 지속시간이 7시간보다 짧은 이벤트도 모두 포함하는 것이다. ACE위성과 WIND 위성이 2000년에 관측한 행성간 자기장 자료에 우리의 자기 구름 기준을 적용하여 자기 구름 이벤트 후보를 선정하였고, 마루바시 박사가 만든 실린더 모델을 자기 구름 이벤트 후보에 적용하여 자기 구름 이벤트를 최종 선정하였다. 이렇게 선정된 2000년도 자기 구름 이벤트는 총 63개이고 이를 리스트로 작성하였다. 우리가 만든 자기 구름 이벤트 리스트는 CME와 K 지수 등 지자기 활동 연구에 활용되고 있다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2004

The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.

• The Korean Journal of Physiology
• /
• v.1 no.2
• /
• pp.177-180
• /
• 1967

In order to see whether the mamillary bodies participate in the control of female gonadotrophic function, 12 female rats in which the mamillary bodies were damaged by passing 0.3 ma direct cur-rent through stereotaxically implanted electrodes, 8 rats which received the same treatment except passage of current, and 9 normal rats were prepared. One month after the operation, all animals were sacrificed and their brain lesions checked histologically, their ovaries and uteri examined and weighed. The ovaries and uteri showed neither atrophic changes in any animal, nor significant differences in the weight among the 3 groups. Thus the results do not support the idea that the mamillary bo-dies are implicated in the control of female gonadotrophic function.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.52-58
• /
• 2010

Bulk nanostructured metallic materials are generally synthesized by bottom-up processing which starts from powders for assembling bulk materials. In this study, the bottom-up powder metallurgy and High Pressure Torsion (HPT) approaches were combined to achieve both full density and grain refinement at the same time. After the HPT process at 473K, the disk samples reached a steady state condition when the microstructure and properties no longer evolve, and equilibrium boundaries with high angle grain boundaries (HAGBs) were dominant. The well dispersed alumina particles played important role of obstacles to dislocation glide and to grain growth, and thus, reduced the grain size at elevated temperature. The small grain size with HAGBs resulted in high strength and good ductility.