• Journal of Chest Surgery
• /
• v.29 no.7
• /
• pp.798-801
• /
• 1996

Solitary fibrous tumors of the pleura are rare, slow-growing benign neoplasm, originating from submesothelial Hbroblasts. Approximately 80% of solitary fibrous tumors of the pleura originate in . the visceral pleura and 20% in the parietal pleura. Many of these tumors are pedunculated, attached to the visceral pleura via a well-vasculariEed stalk, and in size from 1 to 36cm with a mean of 6cm. This case report is of a 48 year old woman who presented with dyspnea and right flank pain. Preoperative chest x-ray showed increased hazy density at right lower lung field, and CT scan showed huge heterogeneous mass which was located in right mid and lower thorax. She underwent surgical resec- tion and a lOX15X loom(2200gm weigh) sized large mass was excised. Final histologic diagnosis was solitary fibrous tumor of the plara. The patient was discharged without any complications postoperately.

• Radiation Oncology Journal
• /
• v.17 no.4
• /
• pp.287-292
• /
• 1999

A 39-year-old woman developed a glioblastoma about 7 years and 10 months after local radiotherapy (45 Gy) for pituitary adenoma. Clinical and histopathological details are presented, and previously reported cases of radiation-induced glioma are reviewed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.5
• /
• pp.299-309
• /
• 2018

Now that problems with force-based seismic design have been clearly identified, design is inclined toward displacement-based methods. One such widely used method is Direct-Displacement-Based Design (DDBD). Yet, one of the shortcomings of DDBD is considering higher-mode amplification of story shear, moments, and displacements using equations obtained from limited parametric studies of regular planar frames. In this paper, a different approach to account for higher-mode effects is proposed. This approach determines the lateral secant stiffness of the building frames that fulfill the allowable inter-story drift without exceeding the desired story displacements. Using the stiffness, an elastic response spectrum analysis is carried out to determine elastic higher-mode force effects. These force effects are then combined with DDBD-obtained first-mode force effects using the appropriate modal superposition method so that design can be performed. The proposed design procedure is verified using Nonlinear Time History Analysis (NTHA) of twelve planar frames in four categories accounting for mass and stiffness irregularity along the height. In general, the NTHA response outputs compared well with the allowable limits of the performance objective. Thus, it fulfills the aim of minimizing the use of NTHA for planar frame buildings, thereby saving computational resources and effort.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.188-193
• /
• 2008

According to introduce KTX in Korea, rail-road bridge section of KTX was increased approximately 50% of the total length. Bridge is required periodic inspection and check to prevent accident and hazard because various damage which have effects on traffic and replacement of damaged parts is difficult. Specifically, the train as large-scale transportation because accidents led to great damage, preventing these accidents are critical. Well-organized management and maintenance systems are required to prevent the accidents. In the case of roadway bridge, bridge inspection vehicle is used to deploy inspectors in roadway bridge. However, this method requires a lot of time and efforts, and inspectors are exposed to potential hazard. Also, surrounding environment like poor lighting system or electric wire could harm the inspector while repairing. Due to this reason, automatic repairing and inspecting system have been introduced to replace the old methods. Management system of the railroad bridge track for trains uses various advanced equipments, but whereas roadway bridge management system is lacking these efforts. As a result of that, this study looks over the existing management method. and review the method to apply the Bridge Inspection Robot in railroad bridge. Moreover, this study suggests future management technology using inspection robot.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.743-746
• /
• 2011

본 연구에서는 유한요소해석을 이용하여 차량속도 및 긴장재의 설계에 따른 CFTA 거더의 동적거동 및 동적증폭계수를 분석하였다. 긴장재의 해석변수로서는 긴장재의 양과 긴장력을 고려하였으며 차량하중은 도로교설계기준의 DB-24 하중을 선택하였다. 차량하중은 3축-2트랙에 작용하는 등가절점하중으로 변환하여 속도에 따라 시간함수로 모델링하였다. 긴장재의 양은 외측 �� 내측 덕트의 유무에 따라 변화시켰으며 긴장력은 설계긴장력의 0%에서 100%까지 25%씩 증가시켰다. 차량속도는 40km/hr에서 100km/hr까지 20km/hr씩 증가시켰으며, 해석결과 긴장재의 긴장력 변화는 거더의 동적거동에 영향을 주지 않았으며 초기처짐에만 영향을 주었다. 긴장재의 양에 따라서는 거더의 동적거동이 다르게 나타났으며 긴장재의 양이 적을 수록 동적처짐은 증가하였다. 이를 바탕으로 거더의 동적증폭계수(DAF)를 산출하였으며, 이 결과 긴장재가 없는 경우에도 도로교표준시방서에서 정한 기준 값보다 매우 작은 거동을 보였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.727-739
• /
• 2002

Based on a generalized variational principle for magneto-thermo-elasticity, a theoretical model is proposed to describe the coupled magneto-thermo-elastic interaction in soft ferromagnetic plates. Using the linearized theory of magneto-elasticity and perturbation technique, we analyze the magneto-elastic and magneto-thermo-elastic instability of simply supported ferromagnetic plates subjected to thermal and magnetic fields. A nonlinear finite element procedure is developed next to simulate the magneto-thermo-elastic behavior of a finite-size ferromagnetic plates. The effects of thermal and magnetic fields on the magneto-thermo-elastic bending and buckling is investigated in some detail.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.90-95
• /
• 2007

Conventional bridge inspection involves the physical positioning of an inspector by the hydraulic telescoping boom of a "snooper truck" thereby providing visual access to bridge components. The process is time consuming, hazardous, and may be affected by lighting conditions, Therefore, it is of great interest that an automated and/or teleoperated inspection robot be developed to replace the manual inspection procedure. This paper describes the advanced bridge inspection robot system under development and other related activities currently undergoing at the Bridge Inspection Robot Development Interface (BIRDI). BIRDI is a research consortium with its home in the Department of Civil and Environmental System Engineering at Hanyang University at Ansan. Its primary goal is to develop advanced robot systems for bridge inspection and monitoring for immediate field application and commercialization. The research program includes research areas such as advanced inspection robot and motion control system, sensing technologies for monitoring and assessment, and integrated system for bridge maintenance. The center embraces 12 institutions, which consist of 7 universities, 2 research institutes, and 3 private enterprises. Research projects are cross-disciplinary and include experts from structural engineering, mechanical engineering, electronic and control engineering. This research project will contribute to advancement of infrastructure maintenance technology, enhancement of construction industry competitiveness, and promotion of national capacity for technology innovation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.39-42
• /
• 2010

최근 보행자가 교량의 진동에 의한 불안감을 느끼는 경우가 발생되면서 설계 단계에서 진동에 대한 고려하고 있다. 그러나 설계자는 범용유한요소프로그램에 이동하중을 적용하여 동적응답해석을 하는 것에 어려움을 느끼고 있으며 그 결과 Meister감각곡선에 의한 진동사용성 평가도 정확히 수행되지 않고 있다. 본 연구에서는 설계자들이 수행하는 교량의 진동사용성 평가방법의 간편한 적용을 위하여 이동하중모델 생성툴을 연구하였으며, 범용유한요소프로그램으로 모델링 된 교량의 매개변수를 변화해가며 진동사용성 평가를 수행하였고 연구 결과 중 매개변수의 하나인 보요소의 길이에 따른 진동사용성 평가결과만을 작성하였다. 평가결과 보요소의 길이에 따라 교량에 발생되는 진동과 가속도의 응답치가 다르게 나타났으며, 발생되는 주요주파수 범위도 다르게 해석되었다. 이러한 동적응답의 결과가 다르게 해석되면서 Meister 감각곡선에 의한 평가등급이 차이도 발생되었다. 따라서 정확한 진동사용성 평가를 위해서는 동적응답해석 시 다양한 매개변수에 의한 동적응답의 결과에 대한 연구는 물론 다양한 교량 형식과 그에 맞는 모델링에 대한 많은 연구가 필요할 것으로 사료된다.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.5
• /
• pp.412-416
• /
• 2007

Background: The possibility of developing pulmonary tuberculosis usually increases with increasing age. Therefore, the incidence of endobronchial tuberculosis in older people may increase. We evaluated the clinical characteristics in patients with endobronchial tuberculosis above the age of 70 years. Methods: We enrolled 74 patients (12 males and 62 females; mean age $64.6{\pm}16.2 $years) that were diagnosed with endobronchial tuberculosis from March 2003 to July 2006 at Gyeongsang University Hospital. We retrospectively evaluated the clinical characteristics of endobronchial tuberculosis for patients 70 years or older (older group) and for patients below the age of 70 years (younger group). Results: The number of patients in the older group was 41 (55%). Cough was the most common symptom in the two groups of patients and dyspnea on exertion was more common in the older group of patients than in the younger group of patients (31.7% vs. 12.1%). The actively caesating type of disease was more common in the younger group of patients than in the older group of patients (66.7% vs. 39%). The edematous type of disease was more common in the older group of patients than in the younger group of patients (53.7% vs. 27.2%) (p<0.05). Tracheal and main bronchial involvement of lesions were more common for the younger group of patients than for the older group of patients (30.3% vs. 9.7%) (p<0.05). Conclusion: Endobronchial tuberculosis was commonly observed in patients older than 70 years and this group of patients had some clinical characteristics that were different from the younger group of patients.

• Korean Business Review
• /
• v.20 no.1
• /
• pp.19-32
• /
• 2007

As business environments rapidly changing and becoming more competitive, manager begin to realize the needs of the network organization structure reflecting the newly emerging internet environments. This paper, therefore, attempt to provide managers with a framework that can be used to design an effective network structure. The framework described here shows three important characteristics of network organizations: First, staffs need to be knowledge workers, rather than rule follower. Second, managers need to emphasize the empowerment, rather than exercising hierarchical power and control. In order for managers to support the design of network organizations they need to implement information systems that can integrate staffs, tasks, and information technologies.