• Journal of the Korean Institute of Gas
• /
• v.4 no.1 s.9
• /
• pp.26-32
• /
• 2000

The fretting wear corrosion characteristics between the SM20C and the SM20C, the YBsC3 and the STC4H was experimented by using radical type friction experimental device under the corrosion environment of atmosphere, neutral solution, acid solution and chemical factors of the sea water. The affection of underground water that affect fretting wear corrosion of the SM20C which is moving specimen was more sensitive at the STC4H and more insensible at the YBsC3. The affection of underground water that affect fretting wear corrosion of the STC4H was less, but in the $0.5\%\;H_2SO_4$ and $0.5\%\;HNO_3$ solutions the fretting wear corrosion of the STC4H was more large. The fretting wear corrosion of the SM20C which is moving specimen in the underground water was less than in the $3.5\%\;NaCl$, $0.5\%\;H_2SO_4$ and $0.5\%\;HNO_3$ solutions. As time passed, the fretting wear corrosion is increased in the $HNO_3$ solution and dull in the $0.5\%\;H_2SO_4$ solution.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.85-87
• /
• 2008

DMWs are common feature of the PWR in the welded connections between carbon steel and stainless steel piping. The nickel-based weld metal, Alloy 82/182, is used for welding the dissimilar metals and is known to be susceptible to PWSCC. A round-robin program has been implemented to benchmark the numerical simulation of the transient temperature and weld residual stresses in the DMWs. To solve the round-robin problem related to Pressurizer Safety & Relief nozzle, the thermal elasto-plastic analysis is performed in the DMW by using the FEM. The welding includes both the DMW of the nozzle to safe-end and the SMW of the safe-end and piping. Major results of the analyses are discussed: The axial and circumferential residual stresses are found to be -88MPa(225MPa) and -38MPa(293MPa) on the inner surface of the DMW; where the values in parenthesis are the residual stresses after the DMW. Thermo-mechanical interaction by the SMW has a significant effect on the residual stress fields in the DMW.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.4
• /
• pp.187-202
• /
• 2023

This study focuses on the application of a new measurement method that quantifies the residual color of filtered water using a spectrocolorimeter after filtering the discolored substances. It was confirmed through the color and turbidity cross-test that the discolored substances cannot be measured effectively with the current legal color and turbidity test method. Therefore, the National Institute of Environmental Research's filter testing method, which involves filtering the sample through 0.45 ㎛ filter and visually inspecting the color, was improved. A membrane filter colorimetry (MFC) method was established by measuring the color difference (ΔE*ab(65)) of the filtered filter using a spectrophotometer and expressing it as filter color unit (FCU). Using the MFC method, the FCU for reference materials such as iron and manganese, as well as field samples, was measured. The results showed a high correlation with turbidity, and the color difference patterns varied depending on the type of reference materials and field samples. This indicates that the MFC method is an effective new measurement method of discolored tap water.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.1-14
• /
• 2008

The Bongsang gold-silver deposit consists of quartz veins that fill along the fault Bone within Cretaceous andesitic lapilli tuff. Mineralization is occurred within fault-breccia zones and can be divided into two stages. Stage I which can be subdivided into early and late depositional stages is main ore mineralization and stage II is barren. Stage I began with deposition of wall-rock alteration minerals and base-metal sulfides, and was deposited by later native silver, Ag-bearing tetrahedrite, polybasite and base-metal sulfides such like pyrite, sphalerite, chalcopyrite and galena. Fluid inclusion data indicate that homogenization temperatures and salinities of stage I range from 137 to $336^{\circ}C$ and from 0.0 to 10.6 wt.% NaCl, respectively. It suggests that ore forming fluids were cooled and diluted with the mixing of meteoric water. Also, temperature and sulfur fugacity deduced mineral assemblages of late stage I are $<210^{\circ}C\;and\;<10^{-15.4}$ atm, respectively. Sulfur(3.4%o) isotope composition indicates that ore sulfur was mainly derived from a magmatic source as well as the host rocks. The calculated oxygen{2.9%o, 10.3%o(quartz: 7.9%o, 8.9%o, calcite: 2.9%o, 10.3%o)}, hydrogen(-75%o) and carbon(-7.0%o, -5.9%o) isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.39-44
• /
• 1999

In the study, corrosion characteristics under various corrosion environments(neutral solution, acid solution), for various hinge materials(SM20C, BsC3 and STC4H), were investigated by immersion test, and the behaviour of fretting wear under atmosphere was studied. In immersion test, corrosion potential of those materials showed to be noble in the sequence of $0.5\%HNO_3$> underground water> $0.5\%\;H_2SO_4$ solution, and potential of a sole material, except BsC3, was more noble than these of mixed materials. In same material SM20C, the fretting wear loss of rotary materials increased about 1.9 times to that of moving materials, because of surface hardening by frictional force.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.1
• /
• pp.42-45
• /
• 1994

Deposition of silicon on pretreated sapphire and glass substrates has been investigated by the solution growth method at low temperatures. An average 14 $\mu\textrm{m}$ thickness of silicon was grown over a large area on sapphire substrate originally coated with a much thinner silicon layer [0.5 $\mu\textrm{m}$ (100) Si/(1102) sapphire)] at low temperatures from $380~460^{\cire}C$. Successful results were obtained from surface treated glass substrates in the temperatures range from $420~520^{\circ}C$.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.26-27
• /
• 2000

대기오염물질 배출계수는 국가기관, 연구기관, 학계, 배출사업장, 방지시설업체등 수많은 분야에서 실질적으로 활용하고 있는 자료로서 배출원에 대한 배출특성을 간접적으로 파악할 수 있을 뿐 아니라 기본 부과금의 산정, 대기오염방지설비의 설계, 오염저감 계획의 수립 등 실질적인 대기관리정책의 수립과 평가에 필수적이지만 현재 국내 대기오염 배출원에 대한 배출계수는 개발은 매우 취약한 전무한 상태로 미국(EPA AP-42)등의 배출계수를 그대로 사용하여 국내 실정에는 맞지 않는 문제점이 있었다. (중략)

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.229-235
• /
• 1989

The influence of monogalvanized layer to fatigue strength of two different mating metal specimens (HS*GA, HS*GAB) of high strength steels(HS) and of monogalvanized steel sheets(GA, GAB) were investigated under tensile-shear repeated load, and hardness test. Some of the results are; (1) The main cause of crack initiation and growth at high load range is plastic bending hinge. (2) In low load range, the cracks initiated near the nugget front where the hardness variation is steep.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.394-396
• /
• 2004

원자력 산업계에서는 원전 MMIS(Man-Machine Interface System)의 디지털 기술 적용을 위해 많은 노력을 기울이고 있고, 특히 원자력 산업의 특수성인 안전성 확보에 필요한 개발기준과 규제방법 정립에 많은 연구가 수행되고 있다. 또한 디지털 MMIS의 핵심기반기술인 고 신뢰도 소프트웨어 개발 방법론이 확립되지 못하여 소프트웨어 공통모드고장 문제, 정량적인 소프트웨어 신뢰도 보장 문제 등이 현안으로 제기되고 있다. 이와 같이 원전 MMIS의 디지털화를 성공하기 위해서는 소프트웨어의 고 신뢰도 확보가 관건이며, 고 신뢰도를 확보하기 위한 소프트웨어 개발 방법론의 정립이 절실히 요구되고 있다. 본 논문에서는 원전 소프트웨어 개발에 적응되는 규제지침을 분석하고, 일체형원자로(SMART, System-integrated Modular Advanced ReacTor) MMIS 소프트웨어 개발에 적응될 소프트웨어 개발 방법론을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.439-441
• /
• 2004

소프트웨어 시험은 소프트웨어 제품의 고 품질을 보장하기 위한 중요한 요소들 중의 하나이고, 특히 신뢰도가 원자력 발전소외 안전에 직결되는 디지털 기반의 원전 계측제어계통 소프트웨어는 고품질과 고신뢰도를 제공하여야 한다. 그러므로 원자력발전소에 사용되는 소프트웨어는 안전성과 신뢰성을 제공하기 위해 체계적인 시험을 통하여 설계의 정당성을 확인하고, 요건명세서나 설계사양서에 나타난 계통 및 구성요소의 기능과 요건들이 만족하게 실행됨을 확인하여야 한다. 규제기관에서도 소프트웨어의 안정성, 기능의 완전한 수행, 소프트웨어 자체가 계통의 기능을 저하 시키는지와 계통에게 예정되지 않은 기능을 수행하도록 영향을 주는지외 확인 등을 소프트웨어 시험을 통해 확인하도록 요구하고 있다. 이와 같이 원자력발전소에 사용되는 소프트웨어의 시험을 위해서는 보다 엄격하고 명확한 시험 프레임웍을 개발하고 적용키는 것이 필요하다. 본 논문에서는 소프트웨어 시험과 관련된 인허가 규제요건을 분석하고, 이에 따라 현재 설계를 진행중인 SMART MMIS 소프트웨어 시험에 적용될 소프트웨어 개발생명주기 시험활동, 시험 조직, 시험문서, 소프트웨어 등급별 시험방법 등 시험 프레임웍을 제시한다.