• Environmental and Resource Economics Review
• /
• v.32 no.1
• /
• pp.47-75
• /
• 2023

Compared to the EU, which legislates the Carbon Border Adjustment System (CBAM), the United States' carbon border adjustment policy movement is still relatively slow. Recently, however, a related bill has been proposed in the United States, and research institutes have been presenting research results on how to introduce an upstream carbon tax rather than an emission trading system and carry out carbon border adjustment based on it. Therefore, in this study, we looked at the economic and environmental effects of introducing this type of upstream carbon tax and carbon border adjustment in Korea. If an upstream carbon tax of KRW 30,000 per ton of CO₂ is applied to the net supply of domestic fossil energy, the expected carbon tax revenue is approximately KRW 22.9961 trillion, equivalent to about 5.7% of the total revenue of the Korean government of KRW 402 trillion in 2019. In addition, the carbon dioxide content of the steel sector, calculated based on the energy supply and demand status of the steel sector, which emits the most greenhouse gas emissions in Korea and has a considerable amount of overseas exports, was 106.22 million tons of CO₂. On the other hand, assuming that the upstream carbon tax of 30,000 won per ton of CO₂ embodied is directly passed on to the production cost of the steel sector, the carbon tax burden in the steel sector is estimated to reach approximately KRW 3.1865 trillion. Even after deducting KRW 1.1599 trillion in export refunds estimated by using the share of exports of steel products, the net carbon tax burden on steel products for domestic demand amounts to KRW 2.0266 trillion, which is analyzed to act as a factor in increasing the price of steel products.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.43-50
• /
• 2022

Objective: The purpose of this study is to choose a treatment plan and equipment to maximize tangential irradiation to protect the normal brain tissues as much as possible during total scalp irradiation. Subjects and Methods: After zoning the total scalp of a phantom and selecting a target area for treatment, the study made a Helical TomoTherapy(HT) plan, a Helical TomoTherapy with a Complete Block(HTCB) plan, and a Volumetric Modulated Arc Therapy(VMAT) plan. All of these plans made sure that the volume of a treatment plan with 95% of a prescription dose(40 Gy) would not exceed 95% of the entire volume and that Dmax would not be more than 110% of the prescription dose. The therapy plans compared doses among organs at risk of damage including the brain. Doses in the brain tissues were assessed based on the volumetric criteria for normal tissues in Emami et al. Results: HT, HTCB, and VMAT had a dose of 21.68 Gy, 13.75 Gy, and 20.89 Gy, respectively, in brain tissues at D_33%, a dose of 7.06 Gy, 3.21 Gy, and 7.84 Gy, respectively, at D_67%, and a dose of 3.14 Gy, 1.75 Gy, and 3.84 Gy, respectively, at D_100%. They recorded a Dmean of 16.64 Gy, 11.78 Gy, and 16.64 Gy, respectively. These results show that the overall dose was low in the HTCB plan. When the volume of a low dose was calculated based on 5 Gy, they recorded 87%, 49%, and 96%, respectively, in V_5Gy. In addition, the maximum dose in the remaining organ(brain stem, hippocampus, and both lenses) except for the optic pathway was the lowest in HTCB Conclusion: The findings demonstrate that TomoTherapy with a complete block minimized a dose in organs at risk of damage including the brain and hippocampus on both sides and accordingly reduced the probability of side effects such as radiation-induced brain injuries and a resulting decrease in neurocognitive functions. In addition to total scalp irradiation, if additional studies on ring targets treated in various areas are conducted to establish the benefits of tangential irradiation, it is believed that TomoTherapy using Complete Block can be used to maximize tangential irradiation in treatment planning.

• Journal of Life Science
• /
• v.32 no.3
• /
• pp.202-209
• /
• 2022

The green alga Chlamydomonas reinhardtii, a unicellular haploid eukaryote, has long been used by researchers and industries as a cell factory to produce high value-added microalgae substances using genetic modification. Microalga K01, presumed to be Chlamydomonas, was isolated from 12 freshwater samples from the Chungcheong and Jeolla regions to replace C. reinhardtii, an introduced species currently used in most basic and industrial research. The isolated K01 strain was identified as C. reinhardtii through morphological and phylogenetic studies of the 18S rDNA gene sequence (NCBI accession number KC166137). The growth and lipid content of the isolated C. reinhardtii K01 were compared with three wild and four mutant strains in TAP medium, and it was found that the K01 strain could produce 1.74×10⁷ cells/ml by the third day of culture. The growth rate of C. reinhardtii K01 was 1.5 times faster than UTEX2244, which showed the highest number of cells (1.20×10⁷ cells/ml) among the compared strains. The lipid content of the isolated C. reinhardtii K01 (20.67%) was similar to those of the wild strains, although the fatty acid oleate C18:1 was not detected in the isolated strain but was identified in the seven others. The cell density of the isolated strain increased to 0.87 g/l during a six-day culture in BG11 medium, where nitrate (NaNO₃) was introduced as a nitrogen source, while the seven acquired strains showed almost no cell proliferation.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.17-27
• /
• 2022

In this study, we evaluated the antioxidant and antidiabetic effects of buckwheat. The diabetic animal models were divided into four groups: normal mice group (NOR), streptozotocin-induced diabetic mice group (STZ), group treated with seeds of common or tartary buckwheat (SCB or STB), and the group treated with whole plants of common or tartary buckwheat (PCB or PTB). Rutin content was 44-48 times higher in STB or PTB than in SCB. Oral glucose tolerance and insulin resistance were significantly reduced by treatment with STB, PCB, and PTB. Treatment with PTB also decreased the serum glucose level significantly and the serum insulin levels slightly compared with the STZ group. These results suggest that rutin content and antioxidant activity are closely related to the antidiabetic effect of the treatment. Our results demonstrate that the seeds of tartary buckwheat and whole plants of either common or tartary buckwheat have antidiabetic effects-attenuating blood glucose in an animal model of type II diabetes.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.171-187
• /
• 2022

Recently, the demand and development for non-face-to-face services are rapidly progressing due to the pandemic caused by the COVID-19, and attention is focused on the metaverse at the center. Entering the era of the 4th industrial revolution, Metaverse, which means a world beyond virtual and reality, combines various sensing technologies and 3D reconstruction technologies to provide various information and services to users easily and quickly. In particular, due to the miniaturization and economic increase of convergence sensors such as unmanned aerial vehicle(UAV) capable of high-resolution imaging and high-precision LiDAR(Light Detection and Ranging) sensors, research on digital-Twin is actively underway to create and simulate real-life twins. In addition, Game engines in the field of computer graphics are developing into metaverse engines by expanding strong 3D graphics reconstuction and simulation based on dynamic operations. This study constructed a mirror-world type metaverse that reflects real-world coordinate-based reality using Unreal Engine 5, a recently announced metaverse engine, with accurate 3D spatial information data of convergence sensors based on unmanned aerial system(UAS) and LiDAR. and then, spatial information contents and simulations for users were produced based on various public data to verify the accuracy of reconstruction, and through this, it was possible to confirm the construction of a more realistic and highly utilizable metaverse. In addition, when constructing a metaverse that users can intuitively and easily access through the unreal engine, various contents utilization and effectiveness could be confirmed through coordinate-based 3D spatial information with high reproducibility.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• Journal of agricultural medicine and community health
• /
• v.48 no.2
• /
• pp.103-117
• /
• 2023

Objectives: This study aims to reveal the relationship between social relations and physical activity in the young-old and old-old elderly. Methods: Data from 2020 National survey of Older Koreans were used, and a total of 10,097 subjects over the age of 65 were included in analysis. The dependent variable was physical activity, and the independent variables were social relations barrier and motivational factors. x²-test and binary logistic regression were performed for data analysis. Results: The physical activity rate in the elderly were 40.8% in the young-old and 29.2% in the old-old. The socio-demographic characteristics affecting physical activity were the young-old elderly were sex, residential area, employment status and household income, and the old-old elderly were sex, age, residential area, education level and household income. The social relations barrier factors affecting physical activity were the young-old elderly were number of close friends, family care, exercise information search and video viewing, and the old-old elderly were household type, number of close friends, participation in exercise education, exercise information search and video viewing. The social relations motivational factors affecting physical activity were the young-old elderly were call with children/relative/friend, participation in sports activity, access time from home to parks, and the old-old elderly were call with children/relative/friend, participation in sports activity, satisfaction with green spaces. Conclusions: It was found that social relations barrier and motivational factors of the elderly are important factors to consider when developing physical activity promotion strategy, and there are also difference between the age of the elderly.

• Conservation Science in Museum
• /
• v.3
• /
• pp.43-50
• /
• 2001

This article is about a joint project carried out by the National Museum of Korea and the Tokyo Cultural Properties Research Institute for the conservation of central Asia Wall painting that has been selected for the exhibition at the new Seoul National Museum of Korea at Yongsan. The investigation of the wall painting revealed very useful information. This includes the condition of the object, and the identification of evident damage, such as cracks, loss of pigment, plus materials and methods employed during the object's creation, as well as previous conservation treatment. The object was mainly made by applying plaster to the body (wall) that consisted of a mixture of soils and rice straws. Then, on the surface of the wall-painting, pigments were used to draw and to colour it. As a part of the investigation, radiocarbon dating was conducted using straw samples taken from the object. The result indicates that the object is probably dated form between the end of the 10th Century and the beginning of the 13th Century. The result of X-ray diffraction also revealed the composition of the pigments used on the surface. These are 1. gypsom [Ca(SO₄)·2H₂O], CaSO₄ and Calcite (CaCO₃) and Calcite (CaCO₃) that were used for the white background. 2. Pb₃O₄ and led Arsenate [Pb(As₂O₆) that were used for the red colouring. 3. Cuprite (Cu₂O), Arsenolite (As₂O₃) and Arsenic Oxide (As₂O₄) that were used for the green colouring.

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.249-255
• /
• 2023

Korean melon (Cucumis melo L.) is grown mostly in Northeast Asia area, and as a fruit mainly produced in Korea, the yield per unit area continues to improve, but the cultivation method is limited to soil cultivation, so it is necessary to develop hydroponic cultivation technology for scale and labor-saving is needed. As the ratio of NO₃^- increased, the plant height, the leaf length, the leaf width, and the internode length became longer and larger. On the other hand, the SPAD value decreased. The lower the ratio of NO₃^-, the faster the female flower bloom, and there was no difference in fruit maturity between treatments. There was no difference in the shape of fruit according to the ratio of NO₃^-, and the hardness was higher as the ratio of NO₃^- was lower. The total yield from March to July was KM3 5,650 kg/10a and KM1 4,439 kg/10a, 27% higher in KM3 and, in particular, 36% higher in quantity from March to May, when Korean melon prices were high season. Therefore, it was judged that it would be appropriate to supply NO₃^- suitable for hydroponic cultivation of Korean melon, which was formalized in December and produced from spring, at the level of 6.5 to 10 me·L^-1.