• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.120-145
• /
• 2018

This study intended to examine the drainage facility of Gyeongbokgung Palace based on the traces of the relic found during the excavation survey. Historical records indicate that various efforts have been made for smooth drainage facility for the palace since the foundation of the Joseon Dynasty. Although there are no drawings showing the image of early appearance of Gyeongbokgung Palace during the foundation, it is possible to estimate it through the drawings prepared after the King Yeongjo's reign. The image of the palace after reconstruction can be seen through the "Bukgwoldohyeong" and other relevant documents. At this present, since the survey intends to determine the image of Gyeongbokgung Palace during the reign of King Gojong based on the standard restoration plan of the Cultural Heritage Administration, this study also focused on the drainage facility of Gyeongbokgung Palace during King Gojong's reign, particularly on the collecting wells and culverts of six areas including "Chimjeon Hall", "Taewonjeon Hall", "Geoncheongung Hall", "Sojubang Hall", "Hamhwadang - Jipgyeongdang - Yeonghundang Hall", and "Heungbokjeon Hall". Gyeongbokgung Palace is divided into various zones composed of the central halls and surrounding corridors, and the drains also primarily start from each hall and later join the central drain of the zone. The central drain then leads to the "Eo-gu(御溝)" and the water led to the "Eo-gu" is finally discharged through the water gate. It appears that this series of processes were basically devised to coordinate artificial drain with the natural drain using the natural geographical features of the palace. Research showed that the collecting well where the draining begin was installed in the area where a large amount of household sewage was generated but mostly in the corners where corridors met or corridors and wall met. This appears to be an arrangement to handle the water falling from the roof and household sewage. Also, "Ju(廚)" was installed mainly at the end of the corridor to handle household sewage. The installation of these drainage facilities shows the possibility that the drainage of Gyeongbokgung was very compact under a series of plans.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.292-307
• /
• 2019

Buddhists have always tended to adorn and embellish Buddhist statues and their surrounding spaces in order to exhibit the grandeur and sublime nature of the Buddha. The various kinds of splendid instruments and implements used in such ornamentation are collectively called jangeomgu in Korean. Thus, the term jangeomgu encompasses articles used to decorate Buddhist statues, halos, and baldachin, as well as Buddhist banners and wind chimes, which are generally hung outside a building. Wind chimes are still widely used at Buddhist temples. In China, judging from various structures such as the Wooden Stupa of Yongningsi in Luoyang and the Dunhuang Caves, wind chimes began to be used around the sixth century. As for Korea, Buddhism was first introduced from China during the Three Kingdoms Period, and Koreans accordingly began to build Buddhist temples and buildings. It would appear that wind chimes came to be used around the time that the first temples were built. The oldest extant wind chime in Korea is the gilt-bronze wind chime of Baekje, discovered at the Mireuksa Temple Site in Iksan. In general, Korean wind chimes dating from the Three Kingdoms Period are classified into two general types according to their shape and elevation, i.e., those shaped like a Buddhist bell and those shaped like a trapezoid. As these two forms of wind chimes have influenced each other over time, those made during the Goryeo dynasty, having inherited the style, structure, and design of the preceding period, display such features. At the same time, the artisans who produced wind chimes pursued technical development and adopted free, yet not extravagant, designs. In particular, Goryeo wind chimes are characterized by original designs created through exchanges with other Buddhist art forms of the same period, such as the embossed lotus design band of Goryeo bells; the bullmun design, which served to display the grandeur of the royal family; the samhwanmun design, which consisted of decorating the interior of a Goryeo incense burner with three holes; Sanskrit designs; and designs inspired by the windows and doors of stone pagodas. In this way, the production of Goryeo wind chimes developed with a focus on purpose while being free of formal constraints. This study started out from the fact that the largest number of Korean wind chimes were produced during the Goryeo dynasty. Therefore, research on wind chimes should be based on those of the Goryeo dynasty, especially since fewer relevant studies have been conducted compared to studies on other forms of Buddhist art. For the purposes of this study, the reasons for the production of wind chimes will be examined first, followed by an examination of the various styles of Korean wind chimes. Then, based on the findings of this investigation, the development and characteristics of the wind chimes produced during the Goryeo dynasty will be explored for each period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.376-383
• /
• 2019

This study was conducted to investigate academic self-efficacy, critical thinking disposition, and learning motivation, which influence problem solving ability in nursing students. Data were collected from June 4, 2018 to June 29, 2018, and the final 213 data points were used for analysis. The SPSS/WIN 22.0 program was used to conduct descriptive statics, Pearson's correlation coefficient, t-tests, ANOVA, Scheffe's test and multiple regression analysis. The problem solving ability according to the general characteristics differed among residential type (F=3.930, p=0.021) and satisfaction with major (F=4.618, p=0.011). In the correlation between academic self-efficacy, critical thinking disposition, learning motivation, and problem solving ability of the subject, academic self-efficacy (r=0.573, p<0.001), critical thinking disposition (r=0.620, p<0.001), and learning motivation (r=0.563, p<0.001). The factors affecting the problem solving ability of the study subjects were major satisfaction (${\beta}=.117$, p=0.036), academic self-efficacy (${\beta}=0.314$, p<0.001), critical thinking disposition (${\beta}=0.318$, p<0.001), and learning motivation (${\beta}=0.217$, p=0.004), with an explanatory power of 45.2%. In this study, it is necessary to confirm the effects of the development of the intervention program and the application of the program, which can improve the problem solving ability of nursing students.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.899-915
• /
• 2018

In this study, in order to construct an eco-friendly advanced road transportation network, the multi-layer tunnel, which is a small-sized car road, is designed to have a height of less than 60 cm. However, the shape of the tunnel is low and the height of the traffic sign is small. In order to solve these problems, traffic sign characters were designed in three dimensions, and the possibility of applying the design of the three - dimensional sign that can obtain greater visibility than the existing signs at the same distance and the possibility verification through virtual simulation were performed. The three-dimensional sign is horizontally installed on the ceiling of the multi-layer tunnel. To be seen vertically, it is enlarged by a certain ratio by the perspective, and the width and height are enlarged. Respectively. In addition, 3D simulation was performed to verify the visibility of the stereoscopic signs when the driver ran through the stereoscopic sign design specifications. As a result of the design and experimental study, it was confirmed that the stereoscopic sign could be designed through the theoretical formula and that it could provide the driver with a larger traffic sign character because there is no limitation of the facility limit compared to the existing vertical traffic sign. Also, we confirmed that it can be implemented in the side wall by using the stereoscopic sign design principle installed on the ceiling part. It was confirmed that the design of the stereoscopic sign can be designed to be smaller as the distance that the driver visually recognizes the sperm is shorter, the height of the protrusion vertically at the lower part of the stereoscopic sign becomes higher. As a result of 3D simulation running experiment based on the design information of the stereoscopic sign, it was confirmed that the stereoscopic sign is visually the same as the vertical sign at the planned distance. Although the detailed research and institutional improvement of stereoscopic signs have not been made in Korea and abroad, it is evolved into a core technology of new road traffic facilities through various studies through the possibility of designing and applying stereoscopic signs developed through this study Expect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.297-305
• /
• 2018

Purpose: This study aimed to analyze stress distribution and maximum von Mises stress generated in intracoronal restorations and in tooth structures of mandibular molars with various types of cavity designs and materials. Materials and Methods: Three-dimensional solid models of mandible molar such as O inlay cavity with composite and gold (OR-C, OG-C), MO inlay cavity with composite and gold (MR-C, MG-C), and minimal invasive cavity on occlusal and proximal surfaces (OR-M, MR-M) were designed. To simulate masticatory force, static axial load with total force of 200 N was applied on the tooth at 10 occlusal contact points. A finite element analysis was performed to predict stress distribution generated by occlusal loading. Results: Restorations with minimal cavity design generated significantly lower values of von Mises stress (OR-M model: 26.8 MPa; MR-M model: 72.7 MPa) compared to those with conventional cavity design (341.9 MPa to 397.2 MPa). In tooth structure, magnitudes of maximum von Mises stresses were similar among models with conventional design (372.8 - 412.9 MPa) and models with minimal cavity design (361.1 - 384.4 MPa). Conclusion: Minimal invasive models generated smaller maximum von Mises stresses within restorations. Within the enamel, similar maximum von Mises stresses were observed for models with minimal cavity design and those with conventional design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.108-119
• /
• 2018

"The Collection of Yi Chungmugong" manuscript is a hand-written manuscript of the volume 1 consisting of the Collection, published in 1795 and it seems to have completed the contents of the book by correcting the first part of the book before print. The book adopted a form of Seonjangbon(線裝本) of Ochimanjeongbeop(五針眼訂法) and was urgently needed some measures to preserve because it has been much damaged by stains, loss and oxidation due to moisture on the bottom of it. In addition, a scientific investigation was applied to find out the features of the quality of paper and fiber used for the book, which would be reflected in the process of the preservation. The characteristics of paper were measurmented for size(cm), thickness(mm), weight(g), basis weight($g/m^2$), density($g/cm^3$), chain line and laid lines($3{\times}3cm$). The measurement showed that the characteristics of paper used in royal books published in the late Joseon Dynasty. For the paper-fiber of the book, C stain was used and the technique revealed that the book is made of bast fibre of paper mulberry and its binding strings are cotton. SEM-EDS analysis was performed to verify the existence of additives in paper. As a result of the analysis, The crystallized calcium was detected in addition to the main components carbon(C) and oxygen(O). This artifact is the unique final version of "The collection of Yi Chungmugong", which has considerable value in terms of academic research, besides it helps to understand how to print books of Joseon Dynasty. And it also has a very accurate information of when and where the book was made, which primarily could be resources to conserve and restore for other book heritage.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.