• Title/Summary/Keyword: 이용 형태

Search Result 22,536, Processing Time 0.043 seconds

Implementation of weight sensor with polarization maintaining photonic crystal fiber (편광유지 광결정 광섬유를 이용한 무게센서)

  • Kim, Eung-Soo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.10 no.1
    • /
    • pp.133-138
    • /
    • 2015
  • A weight sensor with a polarization maintaining photonic crystal fiber (PCF) is proposed and investigated by experimentally. The sensor system consists of a 3 dB fiber coupler, a half-wave plate, and light source. Wavelength shift induced by weight acting on the polarization maintaining PCF was measured. Two types of sensor patterns, circle type and straight type, were implemented and evaluated. The sensitivity of straight line type was 680 pm/kg and the circle type was 270 pm/kg, respectively. The both types of sensors have a good sensitivity and good linearity in the wide range.

A Design of a Flash Memory Swapping File System using LFM (LFM 기법을 이용한 플래시 메모리 스와핑 파일 시스템 설계)

  • Han, Dae-Man;Koo, Yong-Wan
    • Journal of Internet Computing and Services
    • /
    • v.6 no.4
    • /
    • pp.47-58
    • /
    • 2005
  • There are two major type of flash memory products, namely, NAND-type and NOR-type flash memory. NOR-type flash memory is generally deployed as ROM BIOS code storage because if offers Byte I/O and fast read operation. However, NOR-type flash memory is more expensive than NAND-type flash memory in terms of the cost per byte ratio, and hence NAND type flash memory is more widely used as large data storage such as embedded Linux file systems. In this paper, we designed an efficient flash memory file system based an Embedded system and presented to make up for reduced to Swapping a weak System Performance to flash file system using NAND-type flash memory, then proposed Swapping algorithm insured to an Execution time. Based on Implementation and simulation studies, Then, We improved performance bases on NAND-type flash memory to the requirement of the embedded system.

  • PDF

Recognition of PRI modulation types of radar signals using the autocorrelation (자기상관관계를 이용한 레이더 신호의 PRI 변조형태 인식 기법)

  • Ryoo Young-Jin;Kim Whan-Woo
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.43 no.3 s.309
    • /
    • pp.61-67
    • /
    • 2006
  • In electronic support systems, the analysis of PRI modulation characteristics for radar signals has attracted much interest because of the problem of the identification ambiguity in dense electronic warfare signal environments. A new method of recognizing the PRI modulation types of radar pulse signals is proposed for electronic support. The proposed method recognizes the PRI modulation types using the classifiers which are based on the property of the linear autocorrelation of the PRI sequences for each PRI modulation type. In addition, the proposed method estimates the PRI modulation period for the PRI modulation types with the periodicity. Simulation results are presented to show the performance of the proposed method.

A Study on the Visualization of Human Network for Mobile Services (인맥 네트워크의 분석을 이용한 모바일 서비스에 관한 연구)

  • Jeong, Gyeo-Un;Kim, Hyo-Dong;Lee, Kyung-Won
    • 한국HCI학회:학술대회논문집
    • /
    • 2006.02b
    • /
    • pp.389-395
    • /
    • 2006
  • 이 연구는 사회관계망의 형태와 구성원에 관한 정보를 분석하여 모바일로 서비스하는 것에 관한 연구이다. 사람들은 얽히고 설킨 다양한 인간 관계를 갖고 있다. 인간 관계를 유지하기 위해 여러 채널을 통해 커뮤니케이션을 하게 된다. 실생활에서 갖게 되는 인간 관계의 형태와 가장 비슷한 형태의 커뮤니케이션 채널은 휴대전화이다. 사회관계망 이론의 관점에서 보면 휴대전화의 사용은 기존의 인맥에서 친밀도가 적은 사람에게는 영향이 크지 않지만 친밀도가 높은 사람에게는 더욱 친밀하게 만드는 영향을 준다. 이 연구에서는 휴대전화의 통화상대, 통화시간, 통화량 등의 정보가 나타나있는 통화기록에 기반하여 일정기간 동안 통화한 상대들을 추출하였다. 통화기록의 정보를 사회 관계망 분석 도구인 UCINET으로 분석한 결과 휴대전화를 매개로 한 사회관계망의 형태가 자아 중심적 관계망과 같은 형태를 지니고 있다는 사실을 도출해냈다. 그리고 자아 중심적 관계망의 분석 기법을 이용하여 관계망의 중심에 있는 자아와 통화상대와의 관계를 분석하였다. 또한 통화상대들의 휴대전화 통화기록을 통해 서로 관계가 있는지에 대해 알아보았다. 그 결과 자아의 인맥 네트워크 안에 있는 사람들을 그룹화하고 그들의 나이, 성별, 직업에 의해 어떠한 특징을 갖는 그룹인지 분석하였다. 이러한 연구는 휴대전화를 통해 자신의 인간 관계 형태를 파악하여 관계를 관리하고 유지할 수 있는 새로운 모바일 서비스 개발을 위해 활용될 수 있을 것이다.

  • PDF

Content based Image Retrieval System by Shape Global Feature and Histogram (형태 전역특징과 히스토그램을 이용한 내용 기반 영상 검색 시스템)

  • 황병곤;정성호;이상열
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.7 no.4
    • /
    • pp.9-16
    • /
    • 2002
  • Content based Image retrieval methods in the multimedia information retrievals use primary visual features such as color, texture and shape. Color and texture generally are used as features of the image retrieval systems. But these systems may produce errors in similar image retrieval because two images with different shapes can represent very different contents. Therefore, the use of shape describing features is essential in an efficient content based image retrieval system. In this paper, after the global features filtering process by the boundary of objects, we have created a better shape similarity image retrieval system by a histogram of shape information.

  • PDF

Ultrasonographic Analysis of the Size and Shape of the Muscles (근육의 크기와 형태의 초음파적 분석)

  • Kim, Kwang-Baek
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.48 no.2
    • /
    • pp.9-15
    • /
    • 2011
  • In this paper, we propose a method to extract the external oblique muscle of abdomen images that is often excluded by previous method due to image distortion. In the preprocessing phase of the proposed method, we emphasize the brightness contrast with Ends-in search stretching algorithm after removing noise from the initial ultrasonic images. Then we apply average binarization in vertical direction to extract candidate fascia areas. After removing other areas than fascia with morphological characteristics, the lost part in the fascia during the process is restored with such characteristic information and location information. Then the skin area is also removed with information from the arc appearing in convex filming and the candidate muscle areas are extracted by overlapping two results two way up-down search algorithm. Another noise removing process is done to determine the muscle area. In case of obtaining obscure result, after restoring the muscle area by smearing method, the thickness of the muscle is measured by min square method. The experiment verifies that the proposed method is sufficiently effective to analyze the size and shape of muscles in abdomen in ultrasonography than previously used methods.

Car Plate Recognition using Morphological Information and Enhanced Neural Network (형태학적 정보와 개선된 신경망을 이용한 차량 번호판 인식)

  • Kim Kwang-Baek
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.9 no.3
    • /
    • pp.684-689
    • /
    • 2005
  • In this paper, we propose car license plate recognition using morphological information and an enhanced neural network. Morphological information on horizontal and vertical edges was used to extract the license plate from a car image. We used a contour tracking algorithm combined with the method of histogram and location information to extract individual characters in the extracted plate. The enhanced neural network is proposed for recognizing them, which has the method of combining the ART-1 and the supervised teaming method. The proposed method has applied to real world car images. The experimental results show that the proposed method has better the extraction rates than the methods with information of the thresholding, the RGB and the HSI, respectively. And the proposed neural network has better recognition performance than the conventional neural networks.

EFFICIENT IMPLEMENTATION OF GRAYSCALE MORPHOLOGICAL OPERATORS (형태학 필터의 효과적 구현 방안에 관한 연구)

  • 고성제;이경훈
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.19 no.10
    • /
    • pp.1861-1871
    • /
    • 1994
  • This paper presents efficient real time software implementation methods for the grayscale morphological composite function processing (FP) system. The proposed method is based on a matrix representation of the composite FP system using a basis matrix composed of structuring elements. We propose a procedure to derive the basis matrix for composite FP systems with any grayscale structuring element (GSE). It is shown that composite FP operations including morphological opening and closing are more efficiently accomplished by a local matrix operation with the basis matrix rather than cascade operations, eliminating delays and requiring less memory storage. In the second part of this paper, a VLSI implementation architecture for grayscale morphological operators is presented. The proposed implementation architecture employs a bit-serial approach which allows grayscale morphological operations to be decomposed into bit-level binary operation unit for the p-bit grayscale singnal. It is shown that this realization is simple and modular structure and thus is suitable for VLSI implementation.

  • PDF

A Study on Citation Analysis of Design Science Literature (디자인학분야 문헌의 인용분석 연구 - 시각, 제품, 환경디자인을 중심으로 -)

  • 김순희
    • Proceedings of the Korean Society for Information Management Conference
    • /
    • 2003.08a
    • /
    • pp.233-244
    • /
    • 2003
  • 본 연구는 우리나라 디자인학분야 5개 학회(협회)지의 2002년분에 인용된 3,046개 문헌을 인용문헌의 형태별, 발행지별, 발행년도별, 주제별로 분석하여 디자인학분야 연구자의 문헌 이용행태와 문헌의 이용가치 감소현상 즉 반감기를 측정하였다. 연구결과 디자인학분야 연구자들은 단행본(62.5%), 학술잡지기사(21.8%), 논문(10.8%), 보고서(2.9%), 기타(2%)순으로 많이 이용하였으며, 단행본의 인용이 현저히 많은 것으로 자료 형태별 이용에 있어 국내 디자인학분야 연구자의 연구활동이 국내 사회과학, 미술분야와 유사하다고 볼 수 있다. 발행지별로 분석한 결과는 국내 디자인학분야 연구자들이 국내문헌을 해외문헌보다 2.5배정도 많이 이용한 것으로 국내문헌에 많이 의존하는 것으로 분석되었다. 이것은 해외문헌을 국내문헌보다 2배정도 많이 이용한 것으로 분석된 사회과학분야의 선행연구와 비교할 때 디자인학분야에서는 정반대의 현상을 보이는 것이나 4배정도 국내문헌을 많이 이용한 것으로 분석된 미술분야의 선행연구와는 유사한 결과를 나타내는 것이다. 디자인학분야 문헌의 반감기는 5.75년이었으며, 자료형태별 반감기는 단행본(6.64년), 논문(5.97년), 학술잡지기사 (4.55년), 기타(3.73년), 보고서(3.41년) 순으로 분석되었고, 발행지별 반감기는 해외문헌(9.1년), 국내문헌(5.1년)순으로 분석되었다. 또한 타주제와의 관계분석에 있어 경영학, 건축술, 공학 등과 긴밀한 관계를 맺고 있는 것으로 디자인학이 단순히 미를 추구하는 것이 아니라 산업경쟁력 증진의 도구로서 존재한다는 것을 알 수 있다.

  • PDF

3D morphological analysis of uterine tumor cell (자궁종양 세포의 3차원 형태학적 분석)

  • 최익환;최현주;최흥국
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2003.11a
    • /
    • pp.277-280
    • /
    • 2003
  • 본 연구에서는 자궁종양 세포를 정상, 비정상으로 진단하기 위한 세포핵의 특성값 추출 방법으로 3차원 형태학적 분석 방법을 제안한다. 컨포컬 현미경을 이용하여 3차원 볼륭데이터를 획득하고 3차원 연결 성분 레이블링을 적용하였다 레이블링 후, 각각의 세포핵으로부터 3차원 형태학적 특성값을 추출하였으며 정상세포핵과 비정상세포핵의 3차원 형태계측에 대한 차이를 비교하였다. 이는 잘린 단면의 각도나 두께에 따라 서로 다른 분석 결과를 나타내는 2차원 영상분석방법의 한계를 극복할 수 있으며 실체에 가까운 계측으로 보다 객관적이고 정확한 병리진단을 위한 보조도구로써 활용될 수 있다.

  • PDF