• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.1-12
• /
• 2010

According to the capacity design concept which forms the basis of the current steel seismic codes, the braces in concentrically braced frames (CBFs) should dissipate seismic energy through cyclic tension yielding and cyclic compression buckling while the beams and the columns should remain elastic. Brace buckling in inverted V-braced frames induces unbalanced vertical forces which, in turn, impose the additional beam moments and column axial forces. However, due to difficulty in predicting the location of buckling stories, the most conservative approach implied in the design code is to estimate the column axial forces by adding all the unbalanced vertical forces in the upper stories. One alternative approach, less conservative and recommended by the current code, is to estimate the column axial forces based on the amplified seismic load expected at the mechanism-level response. Both are either too conservative or lacking technical foundation. In this paper, three combination rules for a rational estimation of the column axial forces were proposed. The idea central to the three methods is to detect the stories of high buckling potential based on pushover analysis and dynamic behavior. The unbalanced vertical forces in the stories detected as high buckling potential are summed in a linear manner while those in other stories are combined by following the SRSS(square root of sum of squares) rule. The accuracy and design advantage of the three methods were validated by comparing extensive inelastic dynamic analysis results. The mode-shape based method(MSBM), which is both simple and accurate, is recommended as the method of choice for practicing engineers among the three.

• Korean Journal of Weed Science
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2012

This study was conducted to survey vegetation changes and soil characteristics in Saemangeum new reclaimed tidal land. Soil salinity in border area to tidal land was 22.3 dS $m^{-1}$ but showed 1.1~3.44 dS $m^{-1}$ over the distance of 2 km from border line. The vascular plants in survey sites were recorded as total 26 taxa in 6 families. The frequency of species appearance of Aster tripolium, A. subulatus var. sandwicensis were highest by 61.5 and that of Phragmites communis, Puccinellia nipponica were 53.8. The almost vegetations occurred in the patch which range of soil salinity 14 dS $m^{-1}$ were halophytes as Salicornia europaea, Suaeda asparagoides, S. japonica. As lowed soil salinity as 6.7 dS $m^{-1}$, mixed vegetation of halophytes with P. communis, P. nipponica, Carex pumila were occurred. Dominant species in the range of 3.0 dS $m^{-1}$ area were A. subulatus var. sandwicensis, P. communis, Echinochloa spp., Zoysia sinica and Conyza canadensis. Biomass production was the highest in the area of dominant vegetation with P. communis, and mixed zone with P. communis and Aeschynomene indica are followed. The correlation between vegetation biomass and soil salinity, soil pH and dominance index of vegetation were negative. But that of vegetation biomass and soil organic content were positive.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.97-102
• /
• 2006

Anodic alumina with self-organized and ordered nano hole arrays can be a good candidate of an irradiation mask to modify the properties of nano-scale region. In order to try using porous anodic alumina as a mask for ion-beam patterning, ion beam transmittance of anodic alumina was tested. 4 Um thick self-standing AAO templates anodized from Al bulk foil with two different aspect ratio, 200:1 and 100:1, were aligned about incident ion beam with finely controllable goniometer. At the best alignment, the transmittance of the AAO with aspect ratio of 200:1 and 100:1 were $10^{-8}\;and\;10^{-4}$, respectively. However transmittance of the thin film AAO with low aspect ratio, 5:1, were remarkably improved to 0.67. The ion beam transmittance of self-standing porous alumina with a thickness larger than $4{\mu}m$ is extremely low owing to high aspect ratio of nano hole and charging effect, even at a precise beam alignment to the direction of nano hole. $SiO_2$ nano dot array was formed by ion irradiation into thin film AAO on $SiO_2$ film. This was confirmed by scanning electron microscopy that the $SiO_2$ nano dot array is similar to AAO hole array.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.246-251
• /
• 2003

Angiotensin converting enzyme(ACE) belongs to the class of zinc protease and plays an important role in the regulation of blood pressure. In this experiment, we investigated the inhibitory activities of ninety four plant extracts on ACE. The extracts were prepared by water and refluxing with 70% and 100% methanol. Among the extracts, two plant extracts such as Cassia tora, Persicaria cochinchinensis Kitagawa showed more than 60% inhibitory activities, and Foeniculum vulgare Gaertner, Scutellaria baicalensis Georgl, Caragana sinica (Buchoz) Rehder, Inula britannica var. chinensis showed $45.2{\sim}49.7%$ inhibitory activities. Twenty eight plant extracts such as Hemerocallis fulva L, Camptotheca acuminata Decne, Inula britannica var. chinensis, Xanthium strumarium, Polygonatum odoratum, Phellodendron amurense Rupr, Coix lachryma-jobi var. mayuen, Prunus ansu, Hibiscus mutabilis L, Thchosanthes kirilowii, Helianthus annuus, Juglans sinensis showed $30.3{\sim}39.7%$ Inhibitory activities. These results suggest that plant extracts which contain high ACE inhibitory activities may be useful as anti-hypertension agents and to the treatment of hypertension.

• Korean Journal of Microbiology
• /
• v.47 no.1
• /
• pp.92-96
• /
• 2011

Rhodococcus sp. strain DK17 possesses three megaplasmids (380 kb pDK1, 330 kb pDK2, and 750 kb pDK3). The alkylbenzene-degrading genes (akbABCDEF) are present on pDK2 while the phthalate operons which are duplicated are present on both pDK2 (ophA'B'C'R') and pDK3 (ophABCR). DK17 with an optimal temperature of $30^{\circ}C$ showed no growth at $37^{\circ}C$. When transferred to $30^{\circ}C$, however, the $37^{\circ}C$ culture began to grow immediately, indicating that $37^{\circ}C$ is not lethal but stressful for DK17 growth. In addition, when exposed to $37^{\circ}C$ even for a short time, a part of DK17 cells lost the ability to degrade o-xylene (a model compound of alkylbenzenes). When two hundred colonies were randomly selected for colony PCR for pDK2-specific akbC, ophC', or pDK3-specific ophC, a total of 29 colonies were found to have lost at least one of the three genes. PFGE analysis clearly showed that all the mutants have different megaplasmid profiles from that of DK17 wild type, which are divided into five different cases: Type I (10 mutants, pDK2 loss and acquisition of a new ~700 kb plasmid), Type II (9 mutants, pDK2 loss), Type III (8 mutants, pDK3 loss and acquisition of a new ~400 kb plasmid), Type IV (1 mutant, pDK3 loss), and Type V (1 mutant, pDK2 and pDK3 loss and acquisition of the ~400 kb and ~700 kb plasmids). The above results showing that growth temperature changes can induce physical changes in bacterial genomes suggest that environmental changes in habitats including temperature fluctuations affect significantly the evolution of bacteria.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.12
• /
• pp.1898-1902
• /
• 2010

This study was designed to evaluate antioxidant activity of low-quality Codonopsis lanceolata treated by fermentation process followed by hydraulic high pressure extraction. C. lanceolata was subjected to 5,000 bar for 30 min at $25^{\circ}C$. The highest phenolics content was observed in the combined treatment of fermentation and high pressure extraction (35.11 mg/100 g), followed by high pressure extraction alone (14.78 mg/100 g) and conventional extraction (14.56 mg/100 g). The content of flavonoids followed the similar pattern as that of total phenolics, showing 280.86 mg/100 g of C. lanceolata treated by the combined fermentation with high pressure extraction whereas 193.05 mg/100 g of C. lanceolata treated by the conventional extraction. The DPPH scavenging activity was 69.32% at 0.6 mg/mL of C. lanceolata treated by the combined process, while the DPPH scavenging activities of C. lanceolata treated by high pressure extraction alone and the conventional extraction were 60.35% and 30.92%, respectively. The highest reducing power of C. lanceolata extract (1.0 mg/mL) was observed at the combined treatment (0.926), followed by high pressure extraction alone (0.881) and the conventional extraction (0.733). The combination of fermentation with high pressure extraction significantly increased the contents of phenolics and flavonoids and also enhanced the antioxidant activity. Therefore, the combined application of fermentation and high pressure extraction can be an alternative technique for the extraction of C. lanceolata. These results provide useful information for enhancing biological properties of low-quality C. lanceolata.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.125-133
• /
• 2011

The purpose of this study was to develop a methodology to detect spinosad which are difficult to analyze by multi-component simultaneous analysis of pesticide residues. We monitored spinosad due to the paucity of related information. The spinosad was determined using HPLC with UV detector at 250 nm. Correlation coefficient ($r^2$) for standard curve of spinosad A and D at standard concentration of 0.1-5.0 mg/kg were 0.999, respectively. Limit of quantitation (LOQ) of HPLC analysis was 0.005 mg/kg while limit of detection (LOD) was 0.001 mg/kg. Recovery experiments were conducted on five representative agricultural products to validate the analytical method. The recovery of proposed methods ranged from 74.9% to 104.0% and relative standard deviations were less than 10%. Spinosad residues were investigated in 16 commodities collected from 22 provinces. In this study, residues on all samples were not detected.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.1
• /
• pp.50-56
• /
• 1999

Background : Pleural effusion is a common clinical problem and many clinical and laboratory evaluations, such as tumor marks, have been studied to discriminate malignant pleural fluid from benign pleural fluid. However their usefulness in the diagnosis of pleural effusion is still not established fully. We studied the diagnostic value of cyfra 21-1 in diagnosis of malignant pleural effusion. Methods: Pleural fluid was obtained from 45 patients with malignant diseases(32 lung cancer patients, 13 metastatic malignant diseases) and 47 patients with benign diseases. The level of cyfra 21-1 in the pleural fluid and serum were determined using a CYFRA 21-1 enzyme immunoassay kit(Cis-Bio International Co.). The t-test was used for comparison between two diseases groups and receiver operating characteristic(ROC) curves were constructed by calculating the sensitivities and specificities of the cyfra 21-1 at several points to determine the diagnostic accuracy of the cyfra 21-1. Results: In patients with primary lung cancer, the level of cyfra 21-1 in the pleural fluid was significantly higher than those of patients with benign diseases and had positive correlations between the level of cyfra 21-1 in the pleural fluid and serum levels. In the ROC curve analysis of the pleural fluid, the curve for primary lung cancer group was located closer to the left upper comer and the cut off value, sensitivity and specificity of the cyfra 21-1 of the primary lung cancer group was determined as 22.25ng/ml, 81.8% and 78.7% respectively. Conclusions: Our data indicates that the measurement of cyfra 21-1 level in pleural effusion has useful diagnostic value to discriminate malignant pleural effusion in primary lung cancer from benign pleural effusion.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.15 no.1
• /
• pp.113-125
• /
• 2004

Effect of microwave radiation on physico-chemical properties of cor'n starches was studied. Waxy com, com and high amylose com starches of varying moisture content(20～35%) were subjected to microwave processing(2450MHz) at $120^{\circ}$ and the experimental starch samples were examined by a X-ray diffractometry, rapid viscosity analyzer(RVA) and. with the samples in temperature was observed and the peaks of high amylose com starches at $2^{\circ}$=5.0, 15.0 and $23.0^{\circ}$, were disappeared indicating the melting of crystallines while those of com and waxy com had not changed. A change in gelatinization pattern was observed in the case of corn starches from type A with nearly no peak-viscosity and breakdown to type C. Except a decreased viscosity, no change was observed in those of waxy com starches.

• Journal of Nutrition and Health
• /
• v.48 no.1
• /
• pp.105-112
• /
• 2015

Purpose: This study analyzed the eco-foodservice perception and satisfaction of 344 elementary school parents in Jeju surveyed from February 1~12, 2010, with the aim of providing basic data for quality improvement of eco-foodservice in Jeju. Methods: The data were analyzed by descriptive analysis, ${\chi}^2$-test, t-test, ANOVA, and Pearson's correlation coefficients, using the SPSS Win program (version 12.0). Results: Regarding awareness of eco-friendly food materials of subjects, average score was 3.52 points (out of 5 scales) and 'difference between eco-friendly and general agricultural products (3.76)' showed the highest score whereas 'assurance standard and label of eco-friendly agricultural products (3.31)' showed the lowest score. In terms of the recognition of eco-foodservice implementation, 75.0% of parents were aware of it. Regarding the eco-foodservice satisfaction of the subjects, average score was 3.88 points (out of 5 scales) and food safety (3.98 points) showed the highest score whereas food taste (3.70 points) showed the lowest score. The eco-foodservice perception of subjects showed positive correlation with their eco-foodservice satisfaction. Conclusion: It is necessary for the government and the local government to provide continuing education for school parents in order to enhance their perception of eco-friendly food materials. In addition, systematic and appropriate government support is needed in order to ensure internal stability of eco-foodservice.