• Journal of Marine Life Science
• /
• v.5 no.1
• /
• pp.9-16
• /
• 2020

We evaluated the toxic effects of antifouling paint (irgarol and diuron) on the population growth rate (r) of the marine diatom, Skeletonema costatum. The r of S. costatum was determined after 96 hrs of exposure to irgarol (0, 0.31, 0.63, 1.25, 2.5 and 5 ㎍ l^-1) and diuron (0, 7.81, 15.63, 31.25, 62.5 and 125 ㎍ l^-1). It was observed that r in the control (absence of irgarol and diuron) were greater than 0.04, while r in the treatment groups decreased with increasing irgarol and diuron concentrations. Irgarol and diuron reduced r in a dose-dependent manner with significant decreases occurring at concentrations above 0.63 and 15.63 ㎍ l^-1, respectively. The EC₅₀ values of r in irgarol and diuron exposure were 1.09 and 45.45 ㎍ l^-1. No observed effect concentration (NOEC) were 0.31 and 7.81 ㎍ l^-1, the lowest observed effect concentration (LOEC) were 0.63 and 15.63 ㎍ l^-1. This result indicate that a concentration of greater than 0.63 ㎍ l^-1 of irgarol and 15.63 ㎍ l^-1 of diuron in marine ecosystems induced to decreasing r of S. costatum. Also, these toxic values can be useful as a baseline data for the toxic evaluation of irgarol and diuron in marine ecosystems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.4
• /
• pp.266-272
• /
• 2018

In this study, we created grassland establishment(paddock No.39), grassland improvement(Paddock No.44), and tall fescue seeding(paddock No.64), and the rate botanical composition, DM yield, nutritive value were examined through 2016 to 2017. The rate of botanical composition was 81% in 2016, 75% in 2017, up to 21% higher than No.39 67%, 60%, No.44 58% and 54%. The annual average DM yield was the highest at 13,234kg/ha in the district, followed by No.39, No.44, followed by 10,636kg/ha and 10,235kg/ha, respectively. The crude protein content was the highest at No.39 12.16%, with No.44 and No.64 showing 10.7%, respectively. NDF content (average for two years) was 55.90% in No.44 and No.39, slightly lower than 58.42% and 57.00%, respectively. The two-year ADF average content was 31.07% for the same trend as the NDF capacity in the No.44, below 31.71% and 32.65%, respectively. To sum up the results, Although there was a high level of incentive sowing plot(No.39) in nutritive value, considering the botanical composition and productivity of the pasture, it is also deemed desirable to have a tall fescue plot(No.64).

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.498-506
• /
• 2019

This study is based on a coating method that provides utilization value as a micronised powder for cosmetic raw materials using natural minerals buried in Bonghwa, Gyeongsangbuk-do in Korea. The mineral powder name is called Buseok, and chemical name is pumice powder. The results of a study on the efficacy of cosmetics are reported by the development of particulate powder to assess the performance of this powder. First of all, in order to coat the surface of this powder with oil, aluminum hydroxide was coated on the particulate surface and then coated with alkylsilan. In addition, it was coated with vegetable oil to prevent condensation of the powder and increase the dispersion in the oil phase. First; the particle size of pumice powder was from 10 to 50mm having porous holes on the surface of the particles. Second; The components of this powder contained $SiO_2$, $Al_2O_3$, $Fe_2O_3$, MgO, CaO, $K_2O_2$, $Na_2O$, $TiO_2$, $TiO_2$, MnO, $Cr_2O_3$, $V_2O_5$. Third: The particles of this powder have a planetary structure and are reddish-brown with porosity through SEM and TEM analysis. Fourth; the far-infrared radiation rate of this parabolic powder was $0.924{\mu}m$, and the radiative energy was $3.72{\times}102W/m^2$ and ${\mu}m$. In addition, the anion emission is 128 ION/cc, which shows that the coating remains unchanged. Based on these results, it is expected to be widely applied to basic cosmetics such as BB cream, cushion foundation, powderfect, and other color-coordinated cosmetics, sunblock cream, wash-off massage pack as an application of cosmetics. (Small and Medium Business Administration: S2601385)

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.135-142
• /
• 2022

Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.2
• /
• pp.73-78
• /
• 2022

This experiment was conducted to establish the technology for artificial hay preparation in Korea. Using far-infrared heater, a device that can control temperature, airflow, and far-infrared radiation was produced and conducted on the fourth harvested alfalfa. The drying conditions were carried out by selecting a total of four conditions. For each condition, the radiation rate was set to around 40% (33-42%), and the temperature was set at 58~65℃, and the speed of the airflow was fixed at 60m/s. The overall drying time was set to 30 min in the single and 60 min (30-30 min) and 90 min (30-30-30 min) in the complex condition, and the radiation rate and temperature were changed by time period. In the case of drying condition 1, the final dry matter (DM) content was 46.26%, which did not reach a DM suitable for hay. However, all of the alfalfa corresponding to the remaining drying conditions 2 to 7 showed a DM content of 80% or more, resulting in optimal alfalfa hay production. In power consumption according to the drying conditions, the second drying condition showed the lowest at 4.7 KW, and the remaining drying conditions were as high as 6.5 to 7.1 KW. The crude protein content was found to be high at an average of 25.91% and it showed the highest content in the 5th drying condition (26.93%) and the lowest value in the 6th drying condition (25.16%). The digestibility showed a high value with an average of 84.90%, and there was no significant difference among treatments (p>0.05). Considering the above results, it was judged that drying condition 2 was the most advantageous.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.4
• /
• pp.365-372
• /
• 2022

Cellobiose is a dissacharide constituted by two glucose units joined by a β-('1,4') glycosidic bond that is produced by the decomposition of cellulose. This product exists naturally in plants and has been utilized in different industries as a food sweetener, and as a cosmetic and pharmaceutical material. In this study, the potential of cellobiose as a whitening cosmetic product was evaluated by analyzing autophagy induction and the inhibition of melanin production. A cytotoxicity test conducted in the human melanin-producing cell line MNT-1 with increasing concentrations of cellobiose revealed that this compound did not cause cytotoxicity at 20 mg/mL or less. Based on this, autophagy was firstly evaluated by immunostaining with the autophagy marker microtubule-associated protein 1 light chain 3 (LC3) after treatment with 20 mg/mL of cellobiose. The subsequent confocal microscopy analysis revealed an increase in LC3 puncta, indicating induction of autophagy. In addition, autophagy was further confirmed by western blot analysis, which demonstrated that cellobiose converted LC3-I to LC3- ∏ in a concentration- and time-dependent manners. An analysis of melanin contents after cellobiose treatment at a concentration of 20 mg/mL during 7 days revealed that melanin production was reduced by more than 50%. Additionally, the expression levels of melanogenesis-related proteins TYR and TYRP1 were markedly decreased after cellobiose treatment. Based on these studies, a cosmetic cream formulation containing cellobiose was prepared and the change in formulation was tested for 4 weeks, and it was confirmed that the appearance changed to liquid form at high temperature, but the pH did not change. In conclusion, the present research demonstrated that cellobiose activates autophagy and inhibits melanin production, and showed the potential of this product as a material for whitening cosmetics.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.249-257
• /
• 2022

This study was conducted to comparison analysis growth characteristics, yield and forage quality of 18silage corn varieties grown in paddy and upland fields. In this condition, days to silking of Sinhwangok was the shortest with 78 days and Kangdaok the longest with 92 days. Moreover it was confirmed that the difference of days to silking at this condition greatly occurred in the late species than in the precocious species. The height and ear height ratio of corn grown in paddy decreased by 5~10% and increase by 10~15% compared to upland, respectively. It was confirmed that the ear ratio of corn which enhances the forage quality was highest in Sinhwangok at paddy and upland and most of the varieties decreased by 10~30% at paddy rather than upland. The length of ear was also reduced by 10~25%. In fresh yield, Dacheongok showed the highest yield at 65,750 kg/ha in upland and 38,830 kg/ha in paddy. Similar to the fresh yield, dry and TDN yield in Dacheongok also showed the highest yield at 36,910 kg/ha, 18,040 kg/ha in upland and 21,670 kg/ha, 14,390 kg/ha in paddy, respectively. As a result of analyzing crude protein and starch from seeds to evaluate the feed value of corn for silage, there was no difference between cultivars grown in this condition. In addition, as a result of analyzing the contents of ADF and NDF using leaves, stems and seeds, the contents of leaves and stems were lower in P3394 and P1543 at the upland and lower in Singwangok and Daanok when cultivated at paddy. Moreover ADF and NDF contents were decreased in some varieties in paddy rather than upland. Therefore, there is no significant difference in the feed value of corn varieties grown in this condition, it is possible to cultivate corn in paddy if normal growth is achieved through drainage management.

• Journal of agriculture & life science
• /
• v.50 no.2
• /
• pp.95-105
• /
• 2016

This study was conducted to evaluate the effects of nitrate-rich plants extracts on the in vitro rumen fermentation characteristics and rumen methane production. The extracts of nitrate-rich plants, as potato, carrot, chinese cabbage, lettuce and spinach were used in this study. The ruminal fluid was collected from a cannulated Hanwoo cow fed concentrate and timothy in the ratio of 6 to 4. The 20mL of mixture, comparing McDougall's buffer and rumen fluid in the ratio 2 to 1, was dispensed anaerobically 50mL serum bottles containing 0.3g of timothy substrate and extracts of nitrogen-rich plants. The serum bottles were incubated 39℃ for 9, 12, 24, 48 hours. The pH value was decreased by increased incubation times and normal range to 6.31 to 6.96. The dry matter digestibility was significantly(p<0.05) lower in chinese cabbage than in control at 9h incubation time. Ammonia concentration was significantly(p<0.05) lower in potato, chinese cabbage, lettuce than in control and the rumen microbial growth rate was significantly(p<0.05) higher in carrot than in control at 24h incubation time. The concentrations of acetate and propionate was significantly(p<0.05) lower in treatment than in control. The concentration of butyrate was showed a different pattern depending on treatments. Total gas emissions was significantly(p<0.05) lower in chinese cabbage, lettuce, spinach than in control at 12h, 24h incubation time. Methane production was significantly(p<0.05) lower in potato, chinese cabbage, spinach than in control, carbon dioxide production was significantly(p<0.05) lower in treatment than in control. In conclusion, supplementation of the nitrate-rich plant extracts in ruminal fermentation in vitro resulted in decreasing the methane production without adversely affecting the fermentation characteristics. Particularly the chinese cabbage extract was regard as a potential candidate for reducing the methane emission in ruminants.

• Journal of agriculture & life science
• /
• v.50 no.3
• /
• pp.1-11
• /
• 2016

With increasing interest, there have been studies on LiDAR(Light Detection And Ranging)-based DEM(Digital Elevation Model) to acquire three dimensional topographic information. For producing LiDAR DEM with better accuracy, Filtering process is crucial, where only surface reflected LiDAR points are left to construct DEM while non-surface reflected LiDAR points need to be removed from the raw LiDAR data. In particular, the changes of input values for filtering algorithm-constructing parameters are supposed to produce different products. Therefore, this study is aimed to contribute to better understanding the effects of the changes of the levels of GroundFilter Algrothm's Mean parameter(GFmn) embedded in FUSION software on the accuracy of the LiDAR DEM products, using LiDAR data collected for Hwacheon, Yangju, Gyeongsan and Jangheung watershed experimental area. The effect of GFmn level changes on the products' accuracy is estimated by measuring and comparing the residuals between the elevations at the same locations of a field and different GFmn level-produced LiDAR DEM sample points. In order to test whether there are any differences among the five GFmn levels; 1, 3, 5, 7 and 9, One-way ANOVA is conducted. In result of One-way ANOVA test, it is found that the change in GFmn level significantly affects the accuracy (F-value: 4.915, p<0.01). After finding significance of the GFmn level effect, Tukey HSD test is also conducted as a Post hoc test for grouping levels by the significant differences. In result, GFmn levels are divided into two subsets ('7, 5, 9, 3' vs. '1'). From the observation of the residuals of each individual level, it is possible to say that LiDAR DEM is generated most accurately when GFmn is given as 7. Through this study, the most desirable parameter value can be suggested to produce filtered LiDAR DEM data which can provide the most accurate elevation information.

• Journal of Nutrition and Health
• /
• v.56 no.3
• /
• pp.315-329
• /
• 2023

Purpose: This study examined the meal-kit consumption practices of adults in their 20s and 30s and analyzed the properties that should be given priority for improvement among the selection attributes to improve the quality of meal-kits. Methods: Statistical analyses were conducted using the SPSS program (ver. 28.0) for χ²-test, t-test, one-way analysis of variance, Duncan's multiple range test, factor analysis, and Importance-Satisfaction Analysis (ISA). Results: Of the 249 subjects surveyed, 85.5% had some experience of purchasing meal-kits, with significantly more females than males (p < 0.01), significantly more married people than single people (p < 0.05), significantly more employed people than unemployed people (p < 0.05). Meal-kits were purchased most frequently for meals (60.6%), from discount stores or supermarkets (44.6%), and priced between 10,000 won and 20,000 won per person (46.9%). The overall satisfaction with meal-kits was 4.1 out of 5.0 points. The frequency of purchases was Korean soup dishes (69.5%), Korean main dishes (47.4%), and Korean street snacks (46.9%). Factor analysis of the meal-kit selection attributes revealed, 4 factors: 'quality of food,' 'packaging and diversity,' 'quality of meal-kit,' and 'convenience and price.' Compared to single-person households, multi-person households placed significantly higher importance on the 'quality of food,' 'packaging and diversity,' and 'quality of meal-kit.' The factor, 'packaging and diversity' were significantly higher in the importance evaluation scores for females (p < 0.01), married people (p < 0.05), and people in their 30s (p < 0.05) among meal-kit consumers. According to the ISA results, a critical aspect that meal-kit manufacturers or sellers should strengthen is 'price.' Conclusion: Meal-kit products will need to be developed for various purposes that offer high value for money that can satisfy the consumers' needs to improve the satisfaction of meal-kit consumers.