• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.77-84
• /
• 2020

This study is apply 3D spatial information per traditional landscape space by comparing spatial information data created using a small drone and 3D scanner used for 3D spatial information construction for efficient preservation and management of traditional landscaping space composed of areas such as scenic sites and traditional landscape architectures. The analysis results are as follows. First, aerial photogrammetry data is less accurate than 3D scanners, but it was confirmed to be more suitable for monitoring landscape changes by reading RGB images than 3D scanners by texture mapping using digital data in constructing orthographic image data. Second, the orthographic image data constructed by aerial photogrammetry in a traditional landscaping space consisting of a fixed area, such as Gwanghalluwon Garden, produced visually accurate and precise results. However, as a result of the data extraction, data for trees, which is one of the elements that make up the traditional landscaping, was not extracted, so it was determined that 3D scanning and aerial surveying had to be performed in parallel, especially in areas where trees were densely populated. Third, The surrounding trees in Soswaewon Garden caused many errors in 3D spatial information data including topographic data. It was analyzed that it is preferable to use 3D scanning technology for precise measurement rather than aerial photogrammetry because buildings, landscaping facilities and trees are dense in a relatively small space. When 3D spatial information construction data for a traditional landscaping space composed of area using a small drone and a 3D scanner free from temporal and spatial constraints and compared the data was compared, the aerial photogrammetry is effective for large site such as Hahoe Village, Gyeongju and construction of a 3D space using a 3D scanner is effective for traditional garden such as Soswaewon Garden.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.1
• /
• pp.16-21
• /
• 1999

Seed-propagation of Solomon's seal (Polygonatum odoratum) takes 2 years to shorten the period for becoming a practical method. The experiment was done to establish a proper method of breaking the epicotyl dormancy in bulk seed-propagation. Seedlings with a bulbil were treated with $GA_3$ every 2 days for 4 or 8 days and chilling treatments at $3^{\circ}C$ were enforced for 4, 6, 8 or 12 weeks. Emergence- and growth-related characteristics were examined immediately after the treatments, 3 and 6 weeks later. Rate of cotyledonary sheath rupture immediately after $GA_3$ treatment was greater in its 8-day treatment than in 4-day although its effect disappeared later. However, any epicotyl treated with $GA_3$ solution did not elongate so that new seedlings disemerged over the bed soil. That resulted from not breaking the epicotyl dormancy since $GA_3$ did not rupture all of the cotyledonary sheath formed with several sheets and consequently, the solution did not reach it. The $GA_3$ treatment for bulk seed-propagation, therefore, was impractical method. On the contrary, the chilling treatment was able to be applied to the seed-propagation because of getting the cotyledonary sheath rupture and the epicotyl elongation. Seedling emergence and its growth after chilling treatment were influenced by chilling period although required at least over 6-week treatment for satisfactory results.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.381-388
• /
• 2008

In the common practice of air-photographing measurement aerial-photogrammetric, the location of camera at the time of photographing is identified by performing aerotriangulation. However, installing ground-base station to enable aerotriangulation takes majority portion of a map making cost. Aerial-photogrammetric has shown a great improvement helped by steady upgrading in equipment and development in quantitative study. Aerotriangulation can be replaced by Direct Georeferencing, which uses GPS/INS to identify a camera location and to produce detailed information. An innovative technique replacing aerotriangulation, it has a disadvantage that base station has to be available in the area of photographing. The study intends to suggest a method applying VRS in GPS/INS aerotriangulation. Despite the fact that Direct Georeferencing is the innovated technique which substitutes existing aerotriangulation, it still need to install the ground-base station in GPS/INS aerotriangulation. GPS/INS data was analyzed with 4 different cases in order to accomplish the purpose of this study. In addition, in the thesis, it was approved that VRS can be utilized to make small-scale map as accurate as base station. This study is expected to improve the efficiency of work by showing that VRS can be used not only in base station but also enabling base station in the ground-access challenging area.

• Korean Journal of Clinical Laboratory Science
• /
• v.47 no.4
• /
• pp.243-250
• /
• 2015

A bone marrow biopsy that has undergone decalcification with 10% nitric acid could not be used for various pathological tests and had extremely limited reproducibility. The fixing solution of each experimental group was differentiated in usage, one solution including acid and the other not. The use of the decalcification solution was separated into either acidic or alkaline (EDTA), and further experiments were conducted with differing time phases. When using a fixing solution and decalcification solution which included acid, the specimens were faulty to the extent that all pathological tests were impossible. However specimens that were processed with an EDTA type decalcification solution did not display a non-specific reaction in EBV ISH and were even able to produce results that were at a level suited to various studies or a pathological diagnosis in the FISH, DNA, RNA tests. By improving the fixing and decalcification of bone marrow biopsy, the study was able to make possible ISH, FISH, DNA tests as well as RNA study, and secured the sensitivity, specificity, and reproducibility of various test methods. The stabilization of various test methods that use bone marrow biopsy contributes to the diagnosis, prognosis, prediction, treatment of the patient and provide guidelines for decision-making.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.361-369
• /
• 2006

This study conducted an initialization test to decide dynamic position using AHRS IMU sensor, and derived attitude correction angles of vehicles against time through regression analysis. It was also found that the heading angle was stabilized with variation less than 1°after 60 seconds. Using these angles, this study carried out an experiment on the determination of dynamic position for each system in the open sky and in a semi-open sky. According to the results, in the open sky, DGPS alone systems were excellent in accuracy but poor in data acquisition, so the moving distance was around 12m. In DGPS/IMU combined system, accuracy and data acquisition were satisfactory and the moving distance was around 0.3m. In a semi-open sky, DGPS alone systems were excellent in accuracy in order of DGPS < FIMU < DGPS/IMU according to average and standard errors obtained with exclusion of places where data were not be obtained. The moving distance was the same as that in the open sky. For DGPS, when places where data were not obtainable were divided into Several block and they were compared, the maximum deviation from the trajectory was up to 41.5m in DGPS alone system, but it was less than 2.2m and average and standard errors were significantly improved in the combined system. When the navigation system was applied to surveys and the result was compared with position error 0.2mm under the guideline for digital map, it was possible to work on maps on a scale of up to 1 : 1,000.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.86-92
• /
• 2016

An absorbed dose calculation method using a digital phantom is implemented in normal organs. This method cannot be employed for calculating the absorbed dose of tumor. In this study, we measure the S-value for calculating the absorbed dose of each organ and tumor. We inject a radioisotope into a torso phantom and perform Monte Carlo simulation based on the CT data. The torso phantom has lung, liver, spinal, cylinder, and tumor simulated using a spherical phantom. The radioactivity of the actual absorbed dose is measured using the injected dose of the radioisotope, which is Cu-64 73.85 MBq, and detected using a glass dosimeter in the torso phantom. To perform the Monte Carlo simulation, the information on each organ and tumor acquired using the PET/CT and CT data provides anatomical information. The anatomical information is offered above mean value and manually segmented for each organ and tumor. The residence time of the radioisotope in each organ and tumor is calculated using the time activity curve of Cu-64 radioactivity. The S-values of each organ and tumor are calculated based on the Monte Carlo simulation data using the spatial coordinate, voxel size, and density information. The absorbed dose is evaluated using that obtained through the Monte Carlo simulation and the S-value and the residence time in each organ and tumor. The absorbed dose in liver, tumor1, and tumor2 is 4.52E-02, 4.61E-02, and 5.98E-02 mGy/MBq, respectively. The difference in the absorbed dose measured using the glass dosimeter and that obtained through the Monte Carlo simulation data is within 12.3%. The result of this study is that the absorbed dose obtained using an image can evaluate each difference region and size of a region of interest.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.49-66
• /
• 1969

Eri-silkworm is known as a tropical insect where as poly-voltine type in that area. It eats caster oil plant leaves which are cultivated as an every year cultivatable seed oil use in this country, even though it grows for many years in tropical countries. That is why, farmers have freedom for its cultivation in any year if they want. Therefore, eri-silkworm rearing service is flexible for its diet procurment as wish of farmer. The eri-cocoon price or economical fluctuation may be reactable for the rearing work not like as mulberry cocoon. Fortunately, it also eats cynthia tree leaves. Standing from such a easy condition, the authors have studied about this problem since 1963 to develope a culturing method of eri-silkworm rearing in this country and the authors brought out the matters to be produced as an industry scale. Here, the authors summarized their works of the results covering with thirty three work tables. The obtained results are as follows.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.73-73
• /
• 2000

안티퓨즈 소자는 프로그램 가능한 절연층의 상하 각각에 금속층이나 다결정 실리콘 등의 전도 가능한 전극으로 구성된다. 프로그램은 상하 전극간에 임계전압을 가했을 때 일어나게 되며 이때 절연층이 파괴되므로 비가역적이어서 재사용은 불가능하게 된다. 안티퓨즈 소자는 이러한 프로그램 특성으로 인하여 메모리 소자를 이용한 스위치 보다 속도나 집적도 면에서 우수하다. FPGAsdp 사용되는 안티퓨즈 소자는 집적도의 향상과 적정 절열파괴전압 구현을 위해 절연막의 두께를 감소시키는 것이 바람직하다. 그러나 두께나 감소될 경우 바닥전극의 hillock에 큰 영향을 받게 되며, 그로 인해 절연막의 두께를 감소시키는 것는 한계가 있는 것으로 보고되어 있다. 본 논문에서는 낮은 구동 전압에서 동작하고 안정된 on/pff 상태를 갖는 Al/TiO2-SiO2/Mo 형태의 안티퓨즈 소자를 제안하였다. 만들어진 antifuse cell은 0.6cm2 크기로 약 300개의 샘플을 제작하여 측정하였다. 비저항이 6-9 $\Omega$-cm인 P형의 실리콘 웨이퍼에 RF 마그네트론 스퍼터링(RF magnetron sputtering) 방법으로 하부전극인 Mo를 3000 증착하였다. SiO2는 안티퓨즈에서 완충막의 역할을 하며 구조적으로 antifuse cell을 완전히 감싸고 있는 형태로 제작되었다. 완충막 구조를 만들기 dln해 일반적인 포토리소그라피(Photo-lithography)작업을 거처 형성하였다. 형성된 hole의 크기는 5$mu extrm{m}$$\times$5$\mu\textrm{m}$ 이었다. 완충막이 형성된 기판위에 안티퓨즈 절연체인 SiO2를 PECVD 방식으로 100 증착하였다. 그 후 이중 절연막을 형성시키기 위해 LPCVD를 이용하여 TiO2를 150 증착시켰다. 상부 전극은 thermal evaporation 방식으로 Al을 250nm 증착하여Tejk. 하부전극으로 사용된 Mo 금속은 표면상태가 부드럽고 녹는점이 높은 매우 안정된 금속으로, 표면위에 제조된 SiO2의 특성을 매우 안정되게 유지시켰다. 제안된 안티푸즈는 이중절연막을 증착함으로서 전체적인 절연막의 두께를 증가시켜 바닥전극의 hillock의 영향을 적게 받아 안정성을 유지할 수 있도록 하였다. 또한, 두 절연막 사이의 계면 반응에 의해 SiO2 막을 약화시켜 절연막의 두께가 두꺼워졌음에도 기존의 SiO2 절연막의 절연 파괴 전압 및 누설 전류오 비교되는 특성을 가졌다. 이중막을 구성하고 있는 안티퓨즈의 ON-저항이 단일막과 비교해 비슷한 것을 볼 수 잇는데, 그 이유는 TiO2에 포함된 Ti가 필라멘트에 포함되어 있어 필라멘트의 저항을 감소시켰기 때문으로 사료된다. 결국 이중막을 구성시 ON-저항 증가에 의한 속도 저하 요인은 없다고 할 수 있다. 5V의 절연파괴 시간을 측정한느 TDDB 테스트 결과 1.1$\times$103 year로 기대수치인 수십 년보다 높아 제안된 안티퓨즈의 신뢰성을 확보 할 수 있었다. 제안된 안티퓨즈의 이중 절연막의 두께는 250 이고 프로그래밍 전압은 9.0V이고, 약 65$\Omega$의 on 저항을 얻을수 있었다.

• Journal of KIISE:Software and Applications
• /
• v.36 no.10
• /
• pp.777-785
• /
• 2009

Collaborative filtering is a technique used to predict whether a particular user will like a particular item. User-based or item-based collaborative techniques have been used extensively in many commercial recommender systems. In this paper, a hybrid collaborative filtering method that combines user-based and item-based methods using a low-dimensional linear model is proposed. The proposed method solves the problems of sparsity and a large database by using NMF among the low-dimensional linear models. In collaborative filtering systems the methods using the NMF are useful in expressing users as semantic relations. However, they are model-based methods and the process of computation is complex, so they can not recommend items dynamically. In order to complement the shortcomings, the proposed method clusters users into groups by using NMF and selects features of groups by using TF-IDF. Mutual information is then used to compute similarities between items. The proposed method clusters users into groups and extracts features of groups on offline and determines the most suitable group for an active user using the features of groups on online. Finally, the proposed method reduces the time required to classify an active user into a group and outperforms previous methods by combining user-based and item-based collaborative filtering methods.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.1
• /
• pp.72-75
• /
• 2006

Background : This report reviews our experience with persistent air leaks in the peumothorax that were not considered candidates for surgical treatment in order to evaluate the efficacy and risks of the OK-432 plus autoblood or OK-432 pleurodesis. Material & Methods : From March 2004 to July 2005, 8 consecutive patients who had an air leak in the pneumothorax over 5 days and had been treated with OK-432 plus autoblood or OK-432 pleurodesis. The patients were not considered candidates for surgical treatments because the chest CT findings revealed severe chronic lung disease with multiple bullae and/or bullous changes. A prolonged air leak with/without dead space was treated with either OK-432 plus autoblood or OK-432 pleurodesis. The efficacy and side effects of OK-432 pleurodesis were assessed by determining the duration of the air leak, the number of pleurodesis, the patients' symptoms, measurements of the white blood cell count and the c-reactive protein level. Results : All of eight patients were male and the mean age was $72.4{\pm}8.5$. The mean number of pleurodesis was $1.9{\pm}1.1$ and the mean duration of the air leak was $4.6{\pm}4.6days$ after pleurodesis. Side effects after pleurodesis were encountered in 7 patients, which included a chilling sensation in 7 cases, chest pain in 5 cases, headache in 3 cases, local heat sensation in 2 cases, and fever in 1 case. Leukocytosis was observed in 6 patients, and the mean of WBC count and CRP were $14500{\pm}2100$ and $21.9{\pm}11.4mg/dL$, respectively. Conclusion : Either OK-432 plus autoblood or OK-432 pleurodesis has acceptable side effects, and can be considered a treatment option for persistent air leaks in the pneumothorax that are not candidates for surgical treatment.