• Prospectives of Industrial Chemistry
• /
• v.22 no.4
• /
• pp.1-12
• /
• 2019

최근 전 세계적으로 이상화탄소 배출규제에 대응하기 위해 신에너지를 동력원으로 하는 자동차에 관심이 증가하고 있다. 그중 이온 교환막 연료전지(PEMFC)는 내연기관을 대신에 자동차 동력원으로 많이 사용되어지고 있으며 양산화를 위한 노력을 전 세계적으로 하고 있다. 하지만 이러한 수소 자동차가 시장과 소비자의 요구 조건을 충족하기 위해서는 내구성을 개선하여야 한다. 현재 선진사들을 중심으로 수소 자동차의 내구성을 개선하기 위해 노력하지만, 대부분 실험적 방법으로 내구성의 분석 및 평가를 수행하고 있다. 하지만, 이러한 방법은 비용과 시간이 많이 들기 때문에 경제적이지 못하다. 본 기고문에서는 내구성에 영향을 받는 인자, 연료전지 시스템 내구성을 예측하고 평가할 수 있는 수소 자동차 내구성 모델 개발에 필요한 수식에 관한 연구, 그리고 내구성 개선을 위한 해석적 방법(simulation)에 관한 연구 동향을 소개하고자 한다.

• Applied Chemistry
• /
• v.16 no.1
• /
• pp.25-28
• /
• 2012

A determination method of cyanide ion (CN^-) using nickel complexation reaction by continuous monitoring system. The mechanical parameters and chemical conditions of the complexation reaction were investigated prior to application of continuous monitoring system for determination of cyanide. On the optimized conditions, the calibration curve was linear over the range from 5.0×10^-6 to 1.0×10^-4 M. In this range, 2.40% of the reproducibility (RSD, n=3) was obtained. The limit of detection (3σ/s) was calculated to be 1.8×10^-6 M.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.425-433
• /
• 2017

As the problems related to the environmental pollution such as carbon dioxide emission are emerging, the need for the renewable energy and environmentally friendly energy is getting intense. Fuel cells are eco-friendly energy generation devices that generate electrical energy and produce water as a sole by-product. Compared to the traditional proton exchange membrane fuel cell (PEMFC), anion exchange membrane alkaline fuel cell (AEMAFC) has a main advantage of possibility to use low cost metal catalysts due to its faster kinetics. The AEM, which conducts $OH^-$ ions, should possess high ion conductivity as well as high chemical stability at high pH conditions. We hereby introduce a crosslinked poly(2,6-dimethyl-1,4-phenylene oxide) having a spacer-type conducting group as novel AEM, and report a high ion conductivity ($67.9mScm^{-1}$ at $80^{\circ}C$) and mechanical properties (Young's modulus : 0.53 GPa) as well as chemical stability (6.8% IEC loss at $80^{\circ}C$ for 1,000 h,) for the developed membrane.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.150-150
• /
• 2016

디스플레이, 센서 등 전자소자는 소형화 단계를 지나 인체 부착형 소자로의 발전을 요구하고 있다. 부착형 소자에서는 접착력과 큰 마찰력이 필요하지만 마찰특성이 더 중요하므로 인체 및 물체의 마찰을 위해서는 다양한 표면에 대항하는 마찰 특성과 내구성이 요구되며 이를 위해 개코도마뱀 또는 딱정벌레, 말벌날개와 같은 자연모사형 건식 마찰 방식에 대한 연구가 활발히 진행되고 있다. 그러나 기존 폴리머를 이용하여 자연모사형 마이크로/나노 구조 형성은 기계적으로 가공된 금형 몰딩을 통한 매무 복잡한 공정을 요구된다. 본 연구에서는 이러한 복잡한 공정을 통한 마찰재 제작을 단순화하기 위해서 플라즈마 표면처리를 활용하여 나노구조 형성하는 방법을 소개하고자 하며, 건식 접착 및 마찰용 폴리머 소재(PDMS(Poly dimethyl siloxane))에 따른 표면구조 변화와 표면에너지 및 화학결합 변화에 대한 연구를 수행하였다. 플라즈마 표면처리를 위해서 자체 개발한 선형이온소스를 활용하였으며 입사에너지에 따라 표면형상 변화를 주사전자현미경을 활용하여 관찰하였다. 표면에너지 변화는 접촉각측정기를 활용하였으며, Tribology tester(Ball on disk)를 활용하여 마찰특성을 평가하였다. PDMS(Poly dimethyl siloxane)는 입사에너지가 증가함에 따라 주름형태 구조 크기가 증가하는 것을 관찰하였고, 플라즈마 처리를 통해 표면에너지 및 마찰력 증가를 관찰하였다. 그리고 플라즈마 처리 후 표면에너지 변화인 FOTS(Trichloro-(1H,1H,2H,2H- perfluorooctyl) silane) 처리를 통하여 표면에너지 감소와 마찰력이 절반으로 감소하였다. 본 연구 결과는 나노구조에 따라 표면형상 및 표면에너지 변화에 따른 PDMS의 마찰력 변화를 확인하였고, 이러한 특성을 활용하여 마찰재와 피부 부착형 접착 패치에 응용이 가능할 것으로 기대된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.14-20
• /
• 2018

Electric vehicles are environmentally friendly because they emit no exhaust gas, unlike gasoline automobiles. However, since they are driven by the electric power from batteries, the distance they can travel based on a single charge depends on their energy density. Therefore, the lithium-ion battery having a high energy density is a good candidate for the batteries of electric vehicles. Since the electrode is an essential component that governs their efficiency, the electrode manufacturing process plays a vital role in the entire production process of lithium-ion batteries. In particular, the coating process is a critical step in the manufacturing of the electrode, which has a significant influence on its performance. In this paper, we propose an innovative process for improving the efficiency and productivity of the coating process in electrode manufacturing and describe the equipment design method and development results. Specifically, we propose a design procedure and development method in order to improve the core plate coating quality by 25%, using a technology capable of reducing the assembly margin due to its high output/high capacity and improving the product capacity quality and assembly process yield. Using this method, the battery life of the lithium-ion battery cell was improved. Compared with the existing coating process, the target loading level is maintained and dispersed to maintain the anode capacity (${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$ reduction).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.807-812
• /
• 2015

Li-ion batteries are energy sources that are widely used in applications such as notebooks, cellular phones, power tools, and vehicles. They are devices in which stored chemical energy is changed to electrical energy by electrochemical reactions. They have a high energy density, small size, and are lightweight. In particular, power tools and vehicles require high charge/discharge rates. Therefore, in this paper, we perform electrochemical simulations using a commercial finite-element analysis program to determine the high discharge-rate characteristics of Li-ion cells. In addition, by performing high discharge-rate simulations, we found that the limited discharge current was 63 A. Based on the results obtained, we investigate the behavior of Li-ion cells with a high rate of discharge.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.3
• /
• pp.95-104
• /
• 2022

The development of non-flammable all-solid-state batteries (ASSLBs) has become a hot topic due to the known drawbacks of commercial lithium-ion batteries. As the possibility of applying sulfide solid electrolytes (SSEs) for electric vehicle batteries increases, efforts for the low-cost mass-production are actively underway. Until now, most studies have used high-energy mechanical milling, which is easy to control composition and impurities and can reduce the process time. Through this, various SSEs that exceed the Li⁺ conductivity of liquid electrolytes have been reported, and expectations for the realization of ASSLBs are growing. However, the high-energy mechanical milling method has disadvantages in obtaining the same physical properties when mass-produced, and in controlling the particle size or shape, so that physical properties deteriorate during the full process. On the other hand, wet chemical synthesis technology, which has advantages in mass production and low price, is still in the initial exploration stage. In this technology, SSEs are mainly manufactured through producing a particle-type, solution-type, or mixed-type precursor, but a clear understanding of the reaction mechanism hasn't been made yet. In this review, wet chemical synthesis technologies for SSEs are summarized regarding the reaction mechanism between the raw materials in the solvent.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.443-455
• /
• 2013

Electrochemical studies on charge transfer reactions across the interface between two immiscible electrolyte solutions (ITIES) have greatly attracted researcher's attentions due to their wide applicability in research fields such as ion sensing and biosensing, modeling of biomembranes, pharmacokinetics, phase-transfer catalysis, fuel generation and solar energy conversion. In particular, there have been extensive efforts made on developing sensing platforms for ionic species and biomolecules via gelifying one of the liquid phases to improve mechanical stability in addition to creating microscale interfaces to reduce ohmic loss. In this review, we will mainly discuss on the basic principles, applications and future aspects of various sensing platforms utilizing ion transfer reactions across the ITIES. The ITIES is classified into four types : (i) a conventional liquid/liquid interface, (ii) a micropipette supported liquid/liquid interface, (iii) a single microhole or an array of microholes supported liquid/ liquid interface on a thin polymer film, and (iv) a microhole array liquid/liquid interface on a silicon membrane. Research efforts on developing ion selective sensors for water pollutants as well as biomolecule sensors will be highlighted based on the use of direct and assisted ion transfer reactions across these different ITIES configurations.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.123-129
• /
• 1990

The rate constants for the solvolysis of $trans-[Cr(en)_2Br_2]^+$ ion were determined by the spectrophotometric method in methanol-, ethanol-, acetone-, and acetonitrile-water mixtures, at 20, 25, 30, and 35$^{\circ}C$, respectively. The rate constants increased with increasing co-solvent compositions. The rate constant did not show any relation with the reciprocal of dielectric constant of the solvent-mixtures. The m values of Grunwald-Winstein equation for methanol-, ethanol-, acetonitrile-, and acetone-water mixtures are 0.109, 0.103, 0.101, and 0.095, respectively. A free energy cycle for the process from the initial state to the transition state in water and water + co-solvent mixtures shows that the change in solvation at the transition state has a dominant effect on the rate. From the above results, it is believed that the mechanism for the aquation of this complex is the Id mechanism.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.489-493
• /
• 2013

The most common carbonaceous anode materials of lithium ion batteries (natural graphite, artificial graphite, hard carbon, and mesocarbon microbeads) were utilized as an electrode in lithium ion capacitors. It could be able to enhance the energy density of capacitors due to the intercalation of lithium ion. In this work, the properties of capacitors using the symmetric electrode were measured by organizing coin cell typed capacitors. Also, we made other capacitors having pre-intercalated lithium ions at one side of the electrode. The results of electrochemical measurements for these capacitors show that the storage capacitance was appeared. In other words, if the migration of lithium ions is supplied continuously in the electrolytes, lithium ions can be diffused into the carbonaceous materials. And it results in the improvement of capacitance compared to only using symmetric carbonaceous electrodes. Also, we conducted the same measurement with graphene oxide having a the large specific area in the same condition. Herein, we recognized that the large specific area is extremely important for supercapacitors.