• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.200-200
• /
• 2021

하천은 용수공급, 관개, 친수활동, 산업활동 등 인간의 활동에 중요한 역할을 한다. 이에 따라 수질관리는 필수적이며 유기물, 중금속, 화학물질 등의 용존물질들은 수질문제에 직접적으로 영향을 미친다. 따라서 하천에서의 용존물질의 혼합 거동을 파악하기 위한 연구가 지난 수십년간 이루어지고 있다. 하천 흐름에 따른 오염물질의 이동 및 확산 거동을 예측하기 위하여 1차원 추적모형이 활용되는데, 그 중 하천저장대 모형(Transient Storage Model, TSM)은 자연하천의 복잡하고 불규칙한 수리·지형적인 특성을 단순하게 반영할 수 있다는 장점때문에 가장 많이 사용된다. 하지만 TSM은 매개변수에 대한 의존성과 불확도가 크며, TSM의 저장대에서의 농도분포에 대한 지수함수형태의 모델링이 하상간극수역(Hyporheic zone)에서의 저장대 특성을 반영하기에 구조적으로 부정확하다는 단점이 제기되고 있다. 최근 이러한 TSM의 단점을 보완하고 하천에서의 저장대 메커니즘을 보다 정확하게 구현하고자 체류시간분포(residence time distribution)를 이용한 확률론적 저장대 모델링 프레임워크가 등장하고 있다. 본 연구에서는 본류대와 저장대에서의 오염물질의 체류시간분포를 분리하여 해석하고 이를 전달함수(transfer function)를 이용한 합성곱으로 결합한 형태의 프레임워크를 적용하여 모델링하였다. 상기의 모형을 검증하기 위하여 2019년 감천의 4.85km 구간에서 추적자 실험을 실시하였다. 실험 당시 유량은 12.9 m³/s로 풍수기에 해당되며 평균 유속은 약 0.6 m/s로 측정되었다. 모형의 매개변수는 추적자 실험으로부터 최적화 기법을 통해 역모델링기법으로 결정하였다. 제안된 모형에 의한 모의 결과를 추적자 실험에서의 농도측정자료와 비교한 결과, 평균 0.988의 결정계수를 보여 매우 높은 정확도를 보이고 있음을 알 수 있었다. 저장대특성을 나타내는 농도곡선의 꼬리부에 대하여 같은 조건에서 1차원 이송-분산(ADE) 모형, TSM의 모의결과와도 비교한 결과 본 모형은 추적자 실험 농도측정 결과와 평균 0.195의 오차율을 보이며, 이는 ADE 모형과 TSM의 오차율인 14.03과 1.866에 비해 매우 정확한 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.615-625
• /
• 2008

In this study, classification of streams was conducted for Ji Stream, a tributary to the Geum River and Yo Stream, a tributary to the Seomjin River, and in addition, channel evolution model to the same streams was applied. The classification approaches suggested by Rosgen and Korea Institute of Construction Technology (KICT) were conducted. The channel evolution model suggested by Schumm et al. (1984) was applied. Based on the application results of Rosgen approach, Ji Stream and Yo stream show the characteristics of mountainous stream with pebbles. The application results of channel evolution model indicated that the current condition of Ji Stream and Yo Stream is a state of equilibrium, balancing the sediment supply and sediment transport capacity. The results of this study can be used as a fundamental data for water control project, river restoration and appropriate channel planning.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.84-90
• /
• 2023

Oxygen, which is always present in the atmosphere among the three elements of combustion, can cause fires and explosions with only a very small amount of combustibles under high-pressure oxygen conditions. The burning rate is also significant, and can rise to temperatures that can have a direct impact, such as melting process equipment and piping in an instant. Therefore, accidents that occur under high pressure oxygen often cause more damage than other accidents. Recently, while operating a valve installed in an oxygen supply pipe, rapid combustion and rupture occurred inside, resulting in human casualties due to an explosion. In the case of an old carbon steel pipe, particles generated during operation become combustible and can cause accidents. . In particular, since oxygen facilities are facilities licensed under the High Pressure Gas Safety Management Actand there are no restrictions under the Occupational Safety and Health Act, accumulating these standards is of utmost importance. Therefore, in this study, based on accident cases and overseas standards, methods for improving safety when handling hyperbaric oxygen are reviewed.

• Journal of the Korea Society for Simulation
• /
• v.32 no.4
• /
• pp.11-18
• /
• 2023

This study analyzes the effect of a handshake location of an AS/RS with twin cranes for mixed-model production line at an automobile plant. Implementing a handshake operation has the advantage for preventing route interference between twin cranes that operate without crossing into each other's working areas. However the handshake operation requires additional unloading and loading processes to retrieve assembly parts beyond the handshake area. Therefore the decision regarding the handshake location is crucial to improve efficiency of storage and retrieval operations. Simulation results show that the handshake operation with the optimal handshake location reduces the average response time of storage requests to 87% compared to non-handshake operation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.1
• /
• pp.95-102
• /
• 2007

It needs to Prevent damage as aging shotcrete itself exists as a dangerous component to comuting vehicles or infrastructure due to scaling, spaling, and loosening. However, it is hard to make an approach owing to a steep slope and high work, and there has been indicated a limit that it is difficult to grasp the internal condition of shotcrete on the surface. This study aimed to research internal defects that cannot be observed from the surface, by measuring a subtle thermal transfer on the shotcrete surface by using infrared thermography for overcoming such a technical limit. As a result of conducting an inspection through an analysis on measured data and fieldwork using an endoscope camera, it was impossible to accurately determine the wet part because of an excessive coating of shotcrete, yet, This study is proposed effictively extract a void part of the inside with non-destructive and non-touching method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.4 s.56
• /
• pp.107-115
• /
• 2009

The number of railway tunnel design is increasing recently compare to a great number of highway tunnel design which had increased with a lot of highway construction in the 70's and 80's. Therefore, there is more or less difference of time between highway tunnel and railway tunnel. In this paper, numerical analysis on two kinds of tunnels, such as two-forked road highway ventilation tunnel and double track railway tunnel with 4.3m of center line, in cases of with support materials condition and without support materials condition were conducted. Finally, stability of two kinds of tunnels were compared and analyzed through comparing of principal stresses and deviator stresses in the near base rock of tunnels using results of numerical analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.157-166
• /
• 2017

This study was conducted to identify the level of diabetes self-care knowledge, confidence, behavior and quality of life in elderly people with diabetes. The participants were 205 elderly with diabetes who visited a citizen health center located in D city. Korea. The data were collected from April, 20th to August 31th, 2015, and were analyzed by the t-test and ANOVA. The results were as follows; 1) The mean scores for diabetes self-care knowledge, confidence, behavior, and quality of life were 6.99 (2.17), 71.27 (10.21), 62.78 (1.29) and 0.86, respectively. 2) There were significant differences in the self-care behavior according to the education level, duration of diabetes mellitus and subjective health, and the quality of life differeddepending on the level of subjective health(F=35.253, p=0.000). 3) Knowledge of diabetes diet was the lowest among the various aspects of diabetes self-care knowledge. Confidence for exercise was lowest, while confidence for medication and blood sugar check was highest. However, the participants exhibited good medication behavior, whereasthey did not carry out blood glucose checks in their self-care management behavior. The most uncomfortable aspect of the quality of life was found to be pain and discomfort. Based on the results of this study, it is necessary to develop guidelines and methods for dietary education reflecting the dietary habits of Koreans, and to investigatethe reasonsfor thelow performance of theblood glucose check. In addition, customized nursing interventionstaking into consideration the characteristics of elderly with diabetes need to be developed and verified.

• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.363-378
• /
• 2006

The Digital Multimedia Broadcasting(DMB) system is developed to offer high quality audio-visual multimedia contents to the mobile environment. The system adopts MPEG-4 standard for the main video, audio and other media format. It also adopts the MPEG-4 scene description for interactive multimedia contents. The animated and interactive contents can be actualized by BIFS(Binary Format for Scene), the binary format for scene description that refers to the spatio-temporal specifications and behaviors of the individual objects. As more interactive contents are, the scene description is also needed more high bitrate. However, the bandwidth for allocating meta data such as scene description is restrictive in mobile environment. On one hand, the DMB terminal starts demultiplexing content and decodes individual media by its own decoder. After decoding each media, rendering module presents each media stream according to the scene description. Thus the BIFS stream corresponding to the scene description should be decoded and parsed in advance of presenting media data. With these reason, the transmission delay of BIFS stream causes the delay of whole audio-visual scene presentation although the audio or video streams are encoded in very low bitrate. This paper presents the effective optimization technique for adapting BIFS stream into expected MPEG-2 TS bitrate without any bandwidth waste and avoiding the transmission delay of the initial scene description for interactive DMB contents.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.245-251
• /
• 2015

In an electrical reliability test of a printed circuit board (PCB), the impact of the micro probing pins on the PCB needs to be checked to ascertain the quality of the circuit. In this study, the impact of the dynamic movement of the probing pin on the pad was observed. As a misaligned pin can exert horizontal force on the pad of the PCB, this study focused on the behavior of a misaligned probing pin. The parameters of observation were the circular and flat edges of the probing pin. The effects of the speed of movement, diameter, and the length of projection of the probing pin were also investigated. The results demonstrated that slippage angle is strongly affected by the shape of the edge of the probing pin, and that projection length is an important factor affecting pin slippage. In contrast, the speed of movement of the probing pin was able to double the slippage angle.

• Journal of Chest Surgery
• /
• v.42 no.4
• /
• pp.532-536
• /
• 2009

Bypass surgery is performed for insuring continuity of a blood supply that is restricted due to obstruction of the native blood supply. Two types of surgery are commonly carried out: one is anatomic bypass and the other is extraanatomic bypass. Especially, extraanatomic bypass surgery is performed in patients who are a high risk for performing anatomical bypass surgery. The risk factors for anatomical bypass surgery are old age, infection, previous surgery and trauma. A 96-year-old patient underwent extraanatomic bypass surgery from the right femoral artery to the left femoral artery due to total occlusion of the left iliac artery, and 7 years after that operation, a pseudoaneurysm abruptly and spontaneously appeared from the bypass suture site without any predisposing factor. The lesion was revealed to be an organizing thrombus.