Proceedings of the Korea Society for Energy Engineering kosee Conference
/
1999.05a
/
pp.127-132
/
1999
우리나라의 도시폐기물 소각로는 화격자 위에 폐기물을 공급하고 화격자 밑에서 공기를 공급하는 스토커식 소각로를 대부분 채택하고 있다. 이러한 스토커 소각로 연소실내에서는 매우 복잡한 연소현상이 발생하는데, 연소실로 투입된 쓰레기는 먼저 건조부에서 수분의 건조가 일어나고, 화격자의 구동에 의해 쓰레기가 혼합 및 이송되면서 열분해, 가스화, 가연성분의 탈휘발화 및 연소, 일부 고정탄소의 표면연소 등의 반응이 일어난다. 그리고 1,2차 연소실에서는 휘발분 및 비산된 고체의 연소가 일어나는데, 이때 대류 및 복사열전달 등의 복잡한 현상을 수반하는 유동장이 형성된다. 더욱이 불균질한 특성을 갖는 쓰레기층 내에서의 복잡한 현상으로 인하여 발생하는 경계조건 설정의 불확실성으로 연소실내의 연소 현상을 전산해석하는 데에는 상당한 어려움이 있다.(중략)
Proceedings of the Korea Information Processing Society Conference
/
2010.04a
/
pp.993-996
/
2010
우리나라의 전자정부 서비스 대부분은 웹 환경을 기반으로 하고 있으며, 이는 국민생활의 질적인 향상을 가져온 반면 개인정보의 수집, 활용, 유통이 급격히 증가되면서 각종 프라이버시침해, 사이버 위협 등의 부작용이 수반되고 있으며 웹 브라우저의 다양화에 따른 웹접근성이 해결되어야 하고, 장애우 차별을 금지하기 위한 서비스가 동시에 제공되어야 한다. 따라서 웹서비스를 대상으로 하는 사이버 위협에 대한 보안대책과 다양한 서비스에 대한 대책이 중요한 요소로 부각되고 있다. 웹 환경에서의 보안문제를 해결하기 위해 기존에는 방어벽등 보안 모듈 부분을 강화하는데 초점을 맞추었으나, 본 논문에서는 그에 국한되지 않고 소프트웨어 개발초기 단계인 분석, 설계단계에서부터 보안문제를 고려하여 운영단계에 이르기까지 보안 취약점을 해결할 수 있는 방안을 제시하였다.
Proceedings of the Korea Information Processing Society Conference
/
2010.11a
/
pp.303-306
/
2010
공공정보시스템에서 외래어 표기법에 어긋나는 귀화자 성명이나 브랜드명(법인명)을 사용할 경우에, 비표준 확장한글을 인식하지 못하여 성명이나 주소를 포함하는 글자가 "?"로 표시되는 깨짐현상이 발생하여 공공서비스 이용에 많은 불편함을 초래하고 있다. 그 원인으로는 첫째로, 외래어 표기법을 준수하지 않았다는 것, 두 번째로는 기존에 구축된 공공정보시스템 대부분이 'EUC-KR' 인코딩 방식을 사용하고 있으므로 비표준 확장한글을 표현하지 못하고 있기 때문이다. 이에 본 논문에서는 기존의 운영환경을 그대로 유지하면서, 비표준 확장한글을 지원할 수 있는 시스템 운영방안을 제안하였다. 연구결과는 실제 공공정보시스템 운영시에 적용할 수 있으며, 사용자에게 보다 나은 서비스를 제공할 수 있다.
Journal of the Korean Society for Precision Engineering
/
v.14
no.8
/
pp.21-28
/
1997
This paper presents the influence of the process parameters on the change in dynamic behavior of a lathe turning system. With variation of feed rate, depth of cut, direction of tool motion, cutting speed and tool location along the workpiece, the dynamic characteristics of stable cutting, chatter transition and fully developed chatter regions are demonstrated. The workpiece vibration during machining is continuously measured at different tool locations along the workpiece and quantitatively analyzed. Complex linear behavior due to change of process parameter values as well as fundamental wystem nonlinearity due to change of process configuration indicated by a tool path dependence of the locations of chatter onset and disappearance are described. Finally, the structural characteristics of the turning system which can have large and nonlinear effects on system behavior are presented.
Proceedings of the Korea Information Processing Society Conference
/
2021.11a
/
pp.600-601
/
2021
식품제조 현장에서 유연포장을 수행하기 위해, 로봇이 다양한 제품들을 파지하거나 이송하는 작업이 필수적이다. 본 논문에서는 전통장류 식품제조에서 다양한 종류와 무게를 조합하는 혼합포장을 위해 전통장류 물체 영역 인식과 종류 인식을 수행한다. 이를 위하여, 대표적인 전통장류에 대해 종류를 분류하고, RGB-D 데이터를 입력으로 물체 영역과 종류 인식을 수행하는 딥러닝 네트워크를 학습한다. 실험 결과를 통해, 물체 영역의 중심점을 기반으로 흡착 기반 파지점을 선정할 수 있음을 확인한다.
Journal of the Korea Organic Resources Recycling Association
/
v.23
no.2
/
pp.28-35
/
2015
In this study, the experiment was carried out to produce methane by applying Semi-Continuous Leachate Recirculation Anaerobic Digestion System fed with source separated food waste from school cafeteria. There were two systems and each system consisted of a bioreactor and a liquid tank. Each bioreactor had a screen near the bottom of the reactor. 2.5L of separated liquid was transferred to the liquid tank for 30min each day by using a tubing pump and the liquid from the liquid tank was pumped to the bioreactor at the upper of the bioreactor as soon as the transfer was ended. Through this circulation, the liquid having high concentration of VFAs was supplied to the top of bioreactor. At the beginning of the experiment, food waste/inoculum anaerobic sludge volume ratio was 2:8 that is 9g VS/L of OLR(Organic Loading Rate). Feeding was conducted every two weeks. Experimental results showed that the contents of moisture, combustible matter, ash were 65.91%, 32.73%, and 1.36%, respectively. Two different food waste loading were studied. The average organic loading rates were 3.51g VS/d for System A and 3.86g VS/d for System B, respectively. The average produced methane based on food waste fed to bioreactor were observed as $6.30m^3CH_4/kgVS{\cdot}d$ for system A and $4.94m^3CH_4/kgVS{\cdot}d$ for System B, respectively.
When a pregnant woman experiences cardiac arrest, resuscitation is of the utmost importance. Cardiac arrest in pregnant women differs from cardiac arrest in the general population since both mother and fetus need to be taken into consideration. In the event of cardiac arrest, determining whether to deliver the baby is significant. Cardiopulmonary resuscitation is not always successful, and the survival rate depends on the speed and precision of the procedure. In this study, we focus on the case of a 30-year-old pregnant woman who experienced cardiac arrest and whose family was quick to perceive her condition and call the hospital. A witness performed initial cardiopulmonary resuscitation, while rescue workers performed the advanced procedure. In this case, the patient and baby received proper treatment and left the hospital after six days. It is extremely rare for a pregnant patient to achieve return of spontaneous circulation (ROSC) or receive advanced cardiac life support before reaching the hospital. However, the woman in question in this study achieved ROSC and received both cardiopulmonary resuscitation before reaching the hospital and advanced cardiac life support at the hospital. The specifics of the case are reported in the context of a literature review.
Journal of Advanced Marine Engineering and Technology
/
v.35
no.1
/
pp.75-81
/
2011
Dissimilar joining of aluminum 6061-T6 alloy to aluminum 5083-O alloy was performed using friction-stir welding technique. The mechanical properties, hardness, macro- and micro-structure on dissimilar friction-stir-weld aluminium alloy were investigated. Mechanical properties of the weld mainly depend on which Al alloy is placed at the retreating sides of the rotating tool respectively during dissimilar friction-stir weld because the microstructure of stir zone was mainly composed of welded Al alloys of the retreating side. Onion ring pattern was observed like lamella structure stacked by each Al alloy in turn. It apparently results in defect-free weld zone that traverse speed was changed to 124 mm/min under conditions of tool rotation speed like 1250 rpm with 5 mm of tool's prove diameter, 4.5 mm of prove length, 20 mm of shoulder diameter, and $2^{\circ}$ of tilting angle. The 231 MPa of ultimate stress and the 121 MPa of yield point are obtained about the friction-stir-welded Al 6061-T6(AS) to Al 5083-O(RS).
Transactions of the Korean Society of Mechanical Engineers A
/
v.39
no.6
/
pp.561-566
/
2015
In this paper, the operating stiffness of a parallel robot used to handle heavy packages is optimized. Because the studied model, called a "pick and place robot," is applied for packaging logistics, it is important for the robot to be lightweight so that it may respond rapidly and have high stiffness to allow sufficient operating precision. However, these two requirements of low weight and high stiffness are mutually exclusive. Thus, the dynamic characteristics of the robot are analyzed through multibody dynamics analysis, and topology optimization is conducted to achieve this exclusive performance. Lastly, the reliability of the topology optimization is verified by applying the optimized design to the parallel robot.
Proceedings of the Korea Water Resources Association Conference
/
2011.05a
/
pp.331-335
/
2011
흔히 진흙으로 불리는 점착성 유사는 모래 등의 비점착성 유사와는 다른 특성을 보인다. 가장 큰 특징은 점착력에 의해 서로 엉겨 붙어 큰 덩어리(플럭)를 형성하고 다시 큰 플럭이 파괴되는 과정인 응집현상(Flocculation Process)을 보인다는 것이다. 이 응집현상의 과정을 통해 플럭은 크기 및 밀도를 지속적으로 변화시킨다. 크기 및 밀도의 변화는 플럭의 침강속도를 변화시켜 점착성 유사의 부유, 퇴적, 이송, 확산의 과정에 직접적인 영향을 미친다. 응집현상은 플럭의 침강속도 뿐 아니라 부피농도와 질량농도 사이의 비선형적 관계를 야기하여 흐름 운동량 방정식 유도, 난류의 모형화 등에서도 비점착성 유사와 다른 방향으로 진행된다. 점착성 유사가 우세한 지역의 또 다른 특성은 자기하중에 의한 압밀현상에 따라 발생하는 가변적인 한계소류력이다. 따라서 점착성 유사의 이동을 모형화 하는 과정에서는 가변적인 침식율의 가정 등을 통해 이에 대한 고려가 반드시 이루어져야 한다. 흐름의 운동량 방정식 및 난류 모형에서는 플럭의 부피 농도와 질량농도가 각 항의 물리적 의미에 부합하도록 개별적으로 선택 및 적용되어야 질량보존의 문제 등으로 발생할 수 있는 계산상의 오류를 배제할 수 있다. 적용 결과, 점착성 유사가 우세한 지역에서 나타나는 높은 부유 및 흐름정체기에서의 부유사 존재 등의 특성이 점착성 유사 이동을 위한 모형에서 보다 합리적으로 계산된다는 사실이 확인되었다. 그리고 비점착성 유사에 적합한 이동 모형이 점착성이 우세한 지역에 적용될 경우, 상황에 따라 유사량을 과대 및 과소 산정할 수 있다는 결론이 도출되었다. 조류의 영향이 존재하는 하구부의 경우에는 조류의 형태와 비대칭성에 따라 유사량의 차이가 큰 것으로 나타났다. 조류의 형태는 주로 하구부의 지형에 의해 결정되므로 준설, 매립, 확폭 등과 같은 하구부에서의 사업이 진행되는 경우, 유사량 변화에 대한 고려가 반드시 이루어져야 할 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.