• 한국양식학회지
• /
• 제18권4호
• /
• pp.280-286
• /
• 2005

순환여과 사육시스템에서 유동층 여과조의 적정 유동조건을 구명하기 위하여 메디아 유동을($50\%,\;100\%$), 수은($15^{\circ}C,\;25^{\circ}C$) 및 암모니아 부하량(2 mg/L, 5 mg/L) 차이에 따른 암모니아 제거율을 조사하였다. 유동층 여과 시스템은 직경 8.3 cm, 높이는 2.0 m의 원통형으로 상부는 여과재료의 유동 비율의 조절이 용이하며 육안적으로 관찰이 가능한 아크릴관을 이용하였고 하부는 PVC 재질로 제작하였다. 유동층 여과 시스템의 여과 메디아로 직경 0.5$\pm$0.1mm 크기의 모래와 제올라이트 입재를 각각 5.4 L씩 여과조에 넣었다. 유동층 여과조의 암모니아 제거 능력은 암모니아 부하량에 따라 부하량이 적은 2 mg/L 실험구에 비해 부하량이 큰 5 mg/L실험구에서 암모니아 제거 효율이 높았고, 여과 메디아 별로는 제올라이트 메디아가 모래 메디아에 비해 암모니아 제거율이 높았다. 수은에 따른 유동층 여과 시스템의 암모니아제거 능력은 수은이 높은 $25^{\circ}C$ 가 수온이 낮은 $15^{\circ}C$에 비해 암모니아 제거율이 높았으며, 메디아의 유동율에 따른 유동층 여과조의 암모니아 제거율은 유동을 $50\%$가 유동을 $100\%$에 비해 높았다. 이상의 결과로부터 유동층 여과조의 운용조건이 수온 $25^{\circ}C$, 암모니아부하량이 5 mg/L이고 여과메디아의 유동율이 $50\%$일 때, 유동층 여과조의 일간 암모니아 제거량은 $80.6{\~}210.6g/m^3$으로 산정되었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.105-107
• /
• 2018

기존에 부유 해양구조물을 바다에서 고정시키기 위하여 수심의 2배 이상의 길이를 사용하는 잉여 계류로프는 해저바닥에서 유동하게 되어 해저 자연환경을 훼손하고, 해저바닥과 잦은 접촉으로 인해 마모로 손상되어 태풍 등 자연재해에서 부유구조물과 양식어장 등의 유실 등 잦은 피해 발생과 유동으로 부유물의 정확한 위치파악이 어려워 안전사고의 원인이 된다. 현재 계류로프로 사용되는 섬유로프와 쇠사슬(Chain)의 단점(전단 취약, 고중량, 부식, 내마모, 해양어패류 부착 등)을 개선하며, 수심의 길이만 연결 할 수 있어 정해진 위치를 이탈하지 않고 쇠사슬이 가지고 있는 장점(고인장력)을 지닌 계류로프에 대해 연구 하였다.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.342-349
• /
• 1988

The characteristics of flow pattern transitions in a horizontal cocurrent gas-liquid flow have been investigated by means of a statistical analysis of instantaneous pressure drop curves at an orifice. The dimensionless intensity of pressure drop fluctuation shows a sudden change during the course of flow transitions, indicating that it may be a good measure to identify the flow regime transitions. The probability density function of the curves feature a unique pattern depending upon the flow regimes and the statistical properties of the PDF also have particular ranges for each flow regime. In conclusion, the statistical analysis of instantaneous pressure drops may be a powerful tool for predicting the flow regime transitions.

• 한국양식학회지
• /
• 제7권4호
• /
• pp.239-249
• /
• 1994

본 연구는 수질관리를 위한 양식장 순환수 처리를 위하여 유동층공법을 이용할 시, 수리학적 모델인자를 결정하기 위하여 반응기의 혼합특성과 산소전달 특성을 파악하는 연구이다. 삼상유동층 반응기의 dye test에서 얻은 결과 분산$(\sigma^2)$, 분산수 $(D/{\mu}L)$를 살펴보면 분산은 0.47이상이고 분산수는$0.35\~\infty$로 높은분산상태를 나타내는 이상적인 완전혼합반응기로 판단된다. 총괄산소전달계수 값을 측정한 결과 공기주입율이 클수록, 메디아농도가 작을수록, 메디아 입경크기가 작을수록 큰 값을 나타내었다. 총괄산소전달계수$(K_{La})$가 반응조 직경과 draft tube 직경비, 공기주입율, 메디아 농도, 메디아 입경크기에 따른 의존성을 파악하면 아래와 같이 표현된다. $$K_{La}\;=\;44.9(D_i/D_c)^{-0.4611}\;A_f^{0.8622}\;C_m^{-0.0746}\;d_p^{-0.4302}$$

• 설비공학논문집
• /
• 제10권5호
• /
• pp.619-629
• /
• 1998

An experimental work was conducted to investigate a feasibility of simultaneous measurement of gas-liquid two-phase flowrates with double orifice plates using air and water. The tests were carried out under the atmospheric pressure and at the ambient temperature using two different tube sizes. Qualities of an air-water flow in the present study have values less than 0.1 and thus the mixed flow showed bubbly, plug, slug flow regimes. The probability density function (PDF) and the power spectral density function (PSDF) of the instantaneous pressure drop traces for the flow regimes were obtained. It is found that some distinctive features exist in the distribution of these functions, depending upon the two-phase flow pattern. The time-averaged value of the instantaneous pressure drop increases with increasing gas and liquid flowrates, showing a single-valued function for the total mass flowrate and the quality. It is also found that the two-phase discharge coefficient exhibits a consistent trend for variation of dimensionless parameters such as the superficial velocity ratio and the gas Reynolds number. The results indicate that simultaneous measurement of two-phase flowrate may be possible based upon a statistical analysis of the instantaneous pressure drop curves monitored using double orifice plates.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1763-1773
• /
• 1998

In the present experimental study, the flow behavior in a semi-closed two-phase natural circulation loop was examined. Water was used as the working fluid. Heat flux, heater-inlet subcooling, and flow restrictions at the heater-inlet and at the expansion-tank-line were taken as the controlling parameters Six circulation modes were identified by changing heat flux and inlet subcooling conditions ; single-phase continuous circulation, periodic circulation (A), two-phase continuous circulation, and periodic circulations (B), (C), and (D). Among these, the single-phase and two-phase continuous-circulation modes exhibit no significant oscillations and are considered to be stable. Periodic circulation (A) is characterized by the large amplitude two-phase f10w oscillations with the temporal single-phase circulation between them, while periodic circulation (B) featured by the flow oscillations with continuous boiling inside the heater section. Periodic circulation (C) appears to be the manometric oscillation with continuous boiling. Periodic circulation (D) has the longer period than periodic circulation (B) and a substantial amount of liquid flow back and forth through the expansion-tank-line periodically ; this mode is considered the pressure drop oscillation. Parametric study shows that the increases of the inlet- and expansion-tank-line- restrictions and the decrease of inlet subcooling broaden the range of the stable two-phase(continuous circulation) mode.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.637-645
• /
• 1999

Horizontal two-phase flow pressure drop within rectangular channels with small gap heights have been examined experimentally. The gap heights range from 0.4mm to 4mm corresponding to aspect ratios(the channel height divided by the width) from 0.02 to 0.2. Water and air were used as the test fluids with the superficial velocity ranges being 0.03-2.39m/s and 0.05-18.7m/s, respectively. The experimental results In rectangular channels were compared with the Lockhart-Martinelli correlation, which are widely used for conventional round tube. The Lockhart-Martinelli correlation turned out to be Inappropriate to represent the present experimental data. In this respect, considering the aspect ratio and gap-height effects, an empirical correlation on two-phase flow pressure drop was proposed. The proposed correlation successfully covers the bubbly, plug, slug and annular flow regimes.

• 한국자동차공학회논문집
• /
• 제4권1호
• /
• pp.187-197
• /
• 1996

Many investigations have been made to determine the pressure drop and heat transfer characteristics for single phase flow in tape generated swirl flow. But few studies have been carried out to investigate the heat transfer in two component, two phase swirl flow with non-boiling. An experimental study has been conducted to determine the effects of tape twist ratios on two phase convective heat transfer coefficients, pressure drop, and void fraction distribution in a non-boiling, air-water, two phase flow. The flow conditions were both swirl and non swirl flows. The internal diameter of the test section is 42.5mm. The tape twist ratios of pitch to diameter ratio varied from 4.0 to 10.6. The heating conditions were isothermal and nonisothermal. The flow patterns identified with experiments were bubbly, bubbly-slug, slug, and slug-annular flow in up-flow. This study has concluded that no significant difference in void fraction distribution were observed both isothermal and nonisothermal conditions, the pressure drop for two phase flow with twisted tape swirler increase as the tape twist ratio decrease, and that values of two phase heat transfer coefficient increase when the tape twist ratio decreases.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1986년도 추계학술대회
• /
• pp.532.1-532
• /
• 1986

유산균이 생성하는 polysaccharide 에 관한 연구의 일환으로서 L. casei YIT 9018 SKD-0007, L. bulgaricus SKD-0003, sir. faecalis SKD-1007, str. thermophilus SKD- 1005, str. thermophilus 510 SKD-1006등을 탈지유에 배양하면서 polysaccharide 생성에 의한 배양액의 점도 변화를 검토하였다. 이러한 다당류가 Antitumor로서의 활성과 제암효과를 가지며 인체내의 생리효과를 고양시킨다고 보고되어 있는바 다당류가 최대로 생성되는 조건을 찾는 것을 본 실험의 목적으로 하였다. 다당류의 생성을 측정하는 방법으로서 배지로는 10% 환원탈지유와 12% 환원전지유를 선택하였으며 Brookfield Viscometer를 사용하여 배양액의 점도를 경시적으로 측정하였다. 시험균 중에서 str. thermophilus 510 SKD-1006이 가장 높은 점도를 나타내었는데 41$^{\circ}C$ 배양 5일째에 5000 cps였고 다른균에 비해서 1000cps이상 높았다. 접종량이 증가할수록 점도도 증가하였으며 14%이상의 탈지유 농도에서는 7000cps를 나타냈다. 탈지유와 전지유 배양액 모두 의가소성 유체의 유동 양식을 나타내었는데 12% 환원전지유 배양액은 최대점도값이 2500 cps에 불과하였으며 배양 2일째에 최대점도 값에 도달하여 그 이후로 급격한 감소현상을 보였다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.306-315
• /
• 2000

An experimental study was conducted to examine the internal flow patterns inside the mixing chamber of effervescent atomizers. The mixing chamber has the rectangular cross section ($8mm{\times}2mm$) and made of transparent acrylic plate for flow visualization. The parameters tested were the air/liquid ratio (ALR), injection. pressure, and the nozzle orifice diameter. Three different flow regimes were observed; bubbly, annular, and intermittent flows. In the bubbly flow regime, the discharged mixture was disintegrated into drops through the bubble expansion and the ligament breakup. On the other hand, in the annular flow regime, the liquid annulus was disintegrated into small drops by the aerodynamic interaction between the phases due to the high relative velocities between the gas and the liquid. In the intermittent flow regime, the bubble-expansion/ligament-disintegration mode and the annulus-disintegration mode appeared alternatively. The correlations representing the transition criteria between the two-phase flow patterns within the mixing chamber were proposed based on the drift-flux models.