• Title/Summary/Keyword: 이상각

Search Result 10,623, Processing Time 0.046 seconds

Clinical Features of Retinal Correspondence according to Refractive Errors and Deviation Angles (굴절이상과 편위각에 따른 망막대응의 임상적 고찰)

  • Wi, Dae-Gwang;Joo, Seok-Hee;Lee, Koon-Ja;Leem, Hyun-Sung
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.15 no.4
    • /
    • pp.367-372
    • /
    • 2010
  • Purpose: The purpose of this study was to provide useful information for evaluating the sensory function of patients with strabismus by identifying the distribution of anomalous retinal correspondence (ARC) and normal retinal correspondence (NRC) by the degree of refractive errors and deviation angles. Methods: Objective refraction (AR/K, Cannon RK-F1, Japan) and subjective refraction tests were performed on 56 subjects (male: 26, female: 30) by an examiner; objective deviation angle was measured using synoptophore (OCULUS Synoptophore, Germany) with subject' eyes fully corrected for distance, and then subjective deviation angle was measured. Results: In all groups with refractive errors, the number of ARC was larger than that of NRC(67%). Particularly, it was largest in groups with myopia (71%), and in all groups, the number of UARC was larger than that of HARC. In groups with anisometropia, although the numbers of NRC and ARC were same, the number of UARC was larger than that of HARC as in other groups. In the distribution of NRC and ARC by deviation angle, the number of NRC was larger than that of ARC (46%) only at microstrabismus (0 ~ ${\pm}10{\triangle}$). Conclusions: Normal retinal correspondence were the most emmetropia in the retinal response were much higher than in the more hyperopia than the retinal correspondence were more myopia. In addition, the smaller the angle of retinal correspondence Normal over many, but overall, respectively.

Cat-CVD법을 이용하여 다양한 제막압력 조건에서 증착된 PTFE(polytetrafluoroethylene) 박막의 소수성 평가에 관한 연구

  • Alghusun, Mohammad;Yeo, Seung-Jun;An, Jeong-Seon
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.02a
    • /
    • pp.281-281
    • /
    • 2012
  • 연꽃잎 효과(Lotus effect)라 불리는 자가 세정 효과(self cleaning effect)는 연꽃이 항상 깨끗한 상태를 유지하는 것이 관찰되면서 꾸준히 관심에 대상이 되어 왔었다. 자가 세정 효과는 접촉각 $150^{\circ}$ 이상의 초소수성 표면에서 구현이 가능하며 이런 표면을 일상생활부터 산업분야까지 응용하고자 하는 많은 노력들이 있었다. 물질의 친수성 또는 소수성은 표면의 거칠기(roughness)와 표면에너지(surface energy)의 두 가지 특성에 의해 결정된다. 하지만 낮은 표면에너지 물질을 사용해도 접촉각 $150^{\circ}$ 이상의 초소수성 표면을 얻긴 힘들며, 표면의 거칠기를 증가시켜야 한다. PTFE (polytetrafluoroethylene)는 낮은 표면에너지를 가진 소수성 물질로 bulk일 경우 접촉각이 약 $108^{\circ}$이지만 거친 표면을 가진 박막으로 만들 경우 접촉각이 $150^{\circ}$ 이상의 값을 가지는 초수수성 표면이 가능한 물질이다. 특히, 초소수성 표면 이외에 우수한 내열성 및 내화학성 특성을 가지고 있어 디스플레이 및 태양전지 등의 자가세정(self cleaning) 보호막으로써 응용이 기대되고 있다. 본 연구에서는 HFPO (hexafluoropropylene)를 원료 가스로 이용하여, Si(100)과 유리 기판위에 Cat-CVD (Catalytic Chemical Vapor Deposition)법으로 PTFE 박막을 증착하였다. 텅스텐(W)을 촉매로 사용하였으며, 촉매온도가 $850^{\circ}C$이상인 조건에서 접촉각이 $150^{\circ}$ 이상인 초소수성 PTFE 표면을 쉽게 얻을 수 있었다. 특히 본 연구에서는 제막압력을 300 mTorr에서 700 mTorr까지 변화시켜 가며 유리와 Si 기판위에 증착하였다. Cat-CVD 제막압력을 변화시켜가며 증착된 PTFE 박막의 접촉각을 측정한 결과, 제막압력이 300 mTorr일 때 glass와 Si 기판위에 증착된 PTFE박막 표면에서의 접촉각은 각각 133, $117^{\circ}$였지만, 제막압력이 400 mTorr이상일 땐 $150^{\circ}$ 이상의 높은 접촉각을 갖는 초소수성 표면을 얻을 수 있었다.

  • PDF

Analysis and Performance enhancement of angle-based outlier detection (각도 기반 이상치 탐지 방법의 분석과 성능 개선)

  • Sin, Yong-Joon;Park, Cheong-Hee
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2010.06c
    • /
    • pp.452-457
    • /
    • 2010
  • 고차원 공간에서 효과적인 이상치 탐지 방법으로 제안되었던 각도 기반 이상치 탐지(Angle Based Outlier Detection)는 객체와 객체를 비교하는 척도로 각도 개념을 사용하여 고차원 공간에서도 일반적인 거리기반 이상치 측정 방법보다 좋은 이상치 탐지 성능을 가진다. 그러나 어떤 이상치가 다른 이상치에 의해 둘러싸인 경우 정상객체와 구분하기 어렵다는 문제가 있다. 이 논문에서는 기존의 이상치 탐지 방법을 개선한 방법을 제안하고 실험을 통하여 기존의 방법과 제안한 새로운 방법을 비교하여 향상된 성능을 입증한다.

  • PDF

Simulation of Output Power Variation in Wind Energy Conversion System due to Pitch Angle Change (피치각을 고려한 풍력발전기 출력특성 시뮬레이션 모델의 응용)

  • Song Seung-Ho;Jeong Byung-Chang
    • Proceedings of the KIPE Conference
    • /
    • 2006.06a
    • /
    • pp.260-262
    • /
    • 2006
  • 본 논문에서는 블레이드 피치각 변동을 포함한 풍력발전기 출력특성 시뮬레이션 모델을 개발하였으며, 피치각 변동이 필요한 경우를 각각 비상정지, 기동원활, 출력제한의 3가지 사례 연구를 통해 개발된 모델의 검증 수행하였다. 비상정지의 상황에서 풍력발전기의 출력특성을 모의하였고, 초기 정지 상태에서 블레이드 기동을 위한 초기 피치각 설정 및 변동하는 회전 속도에 맞는 블레이드 변동 지령 값을 구현하였으며, 정격 풍속이상에서 피치각을 감소시키는 제어기를 구현하여 정격이상의 출력 발생이 제한되는 것을 시뮬레이션을 통하여 확인하였다.

  • PDF

약용식물 추출물의 기능성 검토

  • 박찬성;박추자;전귀향;김동한
    • Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
    • /
    • 2003.10a
    • /
    • pp.146.2-147
    • /
    • 2003
  • 약용식물의 추출물을 식품 제조시에 첨가제로 사용할 목적으로 4종류의 약용식물을 추출하여 각 식물의 기능성을 조사하였다. 골담초, 당귀, 목통, 초피의 나무 줄기를 물과 70% 에탄올로서 추출하여 동결 건조한 후 항균작용, 항산화작용 및 아질산염소거능을 조사하였다. 각 시료의 물과 에탄올추출물의 식중독세균에 대한 항균작용은 그람음성균인 Escherichia coli, Salmonella typhimurium, Shigella sonnei에 대하여 억제 작용을 나타내지 않았다. 그러나 골담초와 당귀의 에탄을 추출물은 2% 이상의 농도에서 그람양성균인 Listeria monocytogenes와 Staphylococcus aureus의 증식을 억제하였다. 각 시료 물추출물의 전자공여능은 500ppm이상의 농도에서 모두 60% 이상의 전자공여능을 나타내었다. 각 시료의 에탄을 추출물은 목통과 초피가 300ppm에서 70% 이상의 전자공여능으로 물추출물보다 우수하였고 골담초는 물추출물과 비슷한 수준이었으며 당귀는 물추출물보다 낮은 전자공여능을 나타내었다. 각 시료 추출물의 아질산염소거능은 물추출 1,000ppm, pH 1.2에서 당귀 38%, 골담초 40%, 목통35%의 소거능을 나타내었으며 초피가 50%로서 가장 우수한 아질산염소거능을 나타내었다. 각 시료에탄을 추출물의 아질산염소거능은 당귀와 골담초가 물추출물보다 약간 낮은 소거능을 나타낸 반면에 목통과 초피는 물추출물보다 높은 아질산염소거능을 나타내었는데, 특히 초피는 1,000ppm pH 1.2에서 66%의 우수한 아질산염소거능을 나타내었다.

  • PDF

Analysis of Correlation between Geometry Elements for the Efficient Use of Satellite Stereo Images (효율적인 스테레오 위성자료 활용을 위한 기하요소 간 상관성 분석)

  • Jeong, Jaehoon
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.34 no.5
    • /
    • pp.471-478
    • /
    • 2016
  • This paper proposes the results of analysis of correlation between satellite geometry elements for an effective use of satellite images. To achieve accurate positional information, stereo images have normal range of convergence and BIE (BIsector Elevation) angles which are greatly influenced by azimuth and elevation angle of individual image. In this paper, the variations of convergence and BIE angles are estimated according to azimuth angle differences between two images and each elevation angle. The analysis provided strong support for predicting stereo geometry without complex analysis of epiploar geometry or mathematics. The experiment results showed that more than 150°, 130°, and 100° azimuth angle differences need to be constructed when elevation angle of two images is 50°, 60°, and 70°, respectively, in order to make the convergence and BIE angle within normal range. The results are expected to be fully used for various application using stereo images.